Introducció
This manual provides essential instructions for the proper installation, use, and maintenance of your Hampton U-Bolt. Please read this guide thoroughly before installation to ensure safe and effective application.
Producte acabatview
Figura 1: Hampton U-Bolt assembly.
Un primer pla view of the Hampton U-Bolt, featuring its U-shaped zinc-plated metal body, threaded legs, a flat washer, and two hexagonal nuts securely fastened at the bottom. This image illustrates the complete U-bolt component.
El Hampton U-Bolt (Model 5230214, Ref.No. 222-208) is a versatile fastener designed for securing pipes, conduits, or other round objects to a support structure. Constructed from zinc-plated steel, it offers durability and corrosion resistance for various applications.
Característiques principals:
- Material: Zinc-plated steel for enhanced durability and corrosion resistance.
- Diàmetre de la rosca: 3/8 de polzada.
- Diàmetre del cable: 0.327 polzades.
- Inner Diameter (between legs): 2-1/2 polzades.
- Longitud interior: 3-5/8 polzades.
- Tipus de fixació: U-Bolt, U-shape head style.
Configuració i instal·lació
Proper installation is crucial for the U-bolt's performance and safety. Ensure all components are present and undamaged before proceeding.
Eines necessàries (no incloses):
- Wrench (appropriate size for 3/8 inch nuts)
- Cinta mètrica
- Eina de marcatge
Passos d'instal·lació:
- Prepareu la superfície de muntatge: Identify the location where the U-bolt will be installed. Ensure the surface is clean, stable, and capable of supporting the intended load.
- Position the Object: Place the pipe, conduit, or object to be secured within the U-bend of the U-bolt.
- Insert Legs Through Support: Guide the threaded legs of the U-bolt through pre-drilled holes in the support structure or mounting plate. The spacing of the holes should match the inner diameter of the U-bolt legs (2-1/2 inches center-to-center).
- Attach Washer and Nuts: Once the legs pass through the support, place the flat washer over both threaded ends. Then, thread a hexagonal nut onto each leg.
- Estrenyeu bé: Using a wrench, gradually tighten both nuts evenly. Alternate tightening each nut to ensure uniform pressure and prevent bending of the U-bolt or damage to the secured object. Do not overtighten, as this can strip threads or deform the U-bolt. Tighten until the object is firmly secured without crushing it.
- Verifica l'estabilitat: After tightening, check that the secured object is stable and does not move excessively.
Consideracions de funcionament
El Hampton U-Bolt is a static fastening component. Its "operation" involves maintaining a secure hold on the object it fastens. Ensure the U-bolt is used within its intended load-bearing capacity and environmental conditions.
- Do not exceed the recommended load for the U-bolt and the supporting structure.
- Avoid exposing the U-bolt to corrosive chemicals that may compromise the zinc plating, unless specifically designed for such environments.
- Regularly inspect the U-bolt for signs of wear, corrosion, or loosening.
Manteniment
Minimal maintenance is required for the Hampton U-Bolt. Periodic inspection is recommended to ensure continued performance and safety.
- Inspecció visual: Periodically check the U-bolt for any visible signs of damage, such as bending, cracks, or significant corrosion.
- Comprovació d'estanquitat: Re-check the tightness of the nuts annually, or more frequently in high-vibration environments. Retighten if any loosening is detected.
- Neteja: If necessary, clean the U-bolt with a damp cloth to remove dirt or debris. Avoid abrasive cleaners that could damage the zinc plating.
- Substitució: If the U-bolt shows signs of severe corrosion, deformation, or thread damage, replace it immediately with a new, equivalent fastener.
Resolució de problemes
Most issues related to U-bolts stem from improper installation or environmental factors. Here are common issues and their solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Object is loose after installation | Nuts not tightened sufficiently; U-bolt size incorrect for object. | Retighten nuts evenly. Ensure U-bolt inner diameter matches object diameter. |
| U-bolt appears bent or deformed | Overtightening; excessive load; incorrect installation. | Replace the U-bolt. Review installation steps and load limits. |
| Corrosion or rust visible | Exposure to harsh environmental conditions; damage to zinc plating. | Clean and inspect. If severe, replace the U-bolt. Consider protective coatings for harsh environments. |
| Threads are stripped | Overtightening; cross-threading during installation. | Replace the U-bolt and nuts. Ensure proper alignment when threading. |
Especificacions
| Marca | Hamptona |
| Número de model | 5230214 |
| Número de referència | 222-208 |
| Material | Acer zincat |
| Acabat exterior | Zinc |
| Diàmetre de rosca | 3/8 polzades |
| Diàmetre del filferro | 0.327 polzades |
| Inner Diameter (between legs) | 2-1/2 polzades |
| Longitud interior | 3-5/8 polzades |
| Tipus de fixació | U-bolt |
| Estil del cap | U-bolt |
| Estil de fil | Mà dreta |
| Grau del fabricant | Grade 8 8 |
| Pes de l'article | 3 lliures |
| Dimensions del producte | 6 x 4.8 x 3.5 polzades |
| Quantitat de paquet d'articles | 1 |
| Sistema de mesura | polzada |
| UPC | 039208210362 |
| Fabricant | Ace Trading Atw |
| Data de primera disponibilitat | 18 de novembre de 2010 |
Garantia i Suport
For warranty information and customer support regarding your Hampton U-Bolt, please refer to the manufacturer's official documentation or contact Hampton directly. The product comes with a standard warranty; specific terms and conditions may apply.
Fabricant: Ace Trading Atw
Número de peça: 02-3450-126
For further assistance, please visit the Hamptona weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
