Compaq HP Evo D510 PGA478B Mirage Motherboard User Manual

1. Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Compaq HP Evo D510 PGA478B Mirage Motherboard. Please read this manual thoroughly before proceeding with installation to ensure proper setup and to prevent damage to the component or other system parts.

Image 1.1: The Compaq HP Evo D510 PGA478B Mirage Motherboard, showing its various ports and slots.

2. Informació de seguretat

Always observe the following safety precautions when handling computer components:

• Ensure your computer is powered off and unplugged from the wall outlet before installation.
• Discharge static electricity by touching a grounded metal object (e.g., the computer chassis) before handling the motherboard.
• Manegeu la placa base per les vores per evitar tocar els components sensibles.
• Wear an anti-static wrist strap if available.
• Keep the motherboard away from liquids and extreme temperatures.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• Compaq HP Evo D510 PGA478B Mirage Motherboard (Part No. 277977-001)
• (Optional, may vary by seller) I/O Shield
• (Optional, may vary by seller) SATA/IDE Cables
• (Optional, may vary by seller) Driver CD/DVD

4. Configuració i instal·lació

4.1. Preparació del sistema

1. Power down your computer and unplug the power cord from the wall outlet.
2. Obriu la caixa de l'ordinador.
3. Remove any existing motherboard if you are replacing one.

4.2. Instal·lació de la placa base

1. Alineeu la placa base amb els separadors de la caixa de l'ordinador.
2. Gently place the motherboard onto the standoffs.
3. Fixeu la placa base amb cargols, procurant no apretar-los massa.

4.3. Instal·lació de components

Install the following components onto the motherboard:

• CPU (processador): Carefully open the CPU socket lever, align the CPU with the socket (matching the golden triangle/notch), gently place it in, and close the lever. Apply thermal paste and install the CPU cooler.
• RAM (Memory Modules): Open the clips on the memory slots. Align the RAM module with the slot notch and press firmly until the clips snap into place. This motherboard has 2 memory slots available.
• Targetes d'expansió: Insert any necessary PCI or AGP expansion cards into their respective slots and secure them.

4.4. Connexions de cable

Connecteu els cables següents:

• Font d'alimentació: Connect the main 20/24-pin ATX power connector and the 4-pin CPU power connector to the motherboard.
• Dispositius d'emmagatzematge: Connect SATA or IDE cables from your hard drives/SSDs and optical drives to the motherboard.
• Connectors del panell frontal: Connect the power button, reset button, HDD LED, power LED, and USB/audio headers from your case to the corresponding pins on the motherboard. Refer to your case manual for specific pin layouts.

5. Instruccions de funcionament

5.1. Arrencada inicial i configuració de la BIOS

After connecting all components and cables, close your computer case and plug in the power cord. Power on your system.

• During startup, press the designated key (commonly DEL, F2, F10, o F12) per entrar a la utilitat de configuració de la BIOS/UEFI.
• Configure basic settings such as date, time, boot order, and enable/disable integrated peripherals as needed.
• Deseu els canvis i sortiu de la BIOS.

5.2. Instal·lació del controlador

After installing your operating system, install the necessary drivers for the motherboard's chipsets, audio, network, and other integrated components. These drivers are typically found on a CD/DVD included with the motherboard or can be downloaded from the Compaq/HP support weblloc.

6. Manteniment

Un manteniment adequat garanteix la longevitat i el funcionament estable de la placa base:

• Neteja: Periodically clean dust from the motherboard and CPU cooler using compressed air. Ensure the system is powered off and unplugged before cleaning.
• Actualitzacions de la BIOS: Check the Compaq/HP support website for BIOS updates. Only update the BIOS if necessary and follow the instructions carefully to avoid system instability.
• Actualitzacions de controladors: Mantingueu els controladors actualitzats per garantir un rendiment i una compatibilitat òptims.

7. Solució De Problemes

Si teniu problemes, tingueu en compte els passos habituals següents per resoldre'ls:

• Sense alimentació/Sense arrencada:
  • Check all power connections (20/24-pin ATX, 4-pin CPU).
  • Assegureu-vos que la font d'alimentació sigui funcional.
  • Verifiqueu la connexió del botó d'engegada del panell frontal.
• Sense pantalla:
  • Assegureu-vos que el monitor estigui connectat i encès.
  • Torneu a col·locar la targeta gràfica (si escau) i els mòduls de RAM.
  • Check if the monitor is connected to the correct video output (integrated or discrete GPU).
• Codis de bip POST:
  • If your system emits a series of beeps, consult the motherboard's BIOS manufacturer documentation (e.g., AMI, Award, Phoenix) to interpret the beep code, which indicates a specific hardware issue.
• Inestabilitat/Avaries del sistema:
  • Check for overheating (CPU, GPU).
  • Assegureu-vos que tots els controladors estiguin correctament instal·lats i actualitzats.
  • Test RAM modules for errors.

8. Especificacions

Key specifications for the Compaq HP Evo D510 PGA478B Mirage Motherboard:

9. Garantia i Suport

This product includes a warranty. For specific details regarding the warranty period and coverage, please refer to the documentation provided with your purchase or contact the seller directly. For technical support, please visit the official Compaq or HP support weblloc per a la vostra regió.

Podeu trobar més informació i recursos de suport a Compaq Store on Amazon.