Cisco DPC3000 DOCSIS 3.0 Cable Modem User Manual

Producte acabatview

The Cisco Model DPC3000 DOCSIS 3.0 Cable Modem provides a high-speed solution for internet connectivity. It incorporates four bonded downstream channels and four bonded upstream channels, enabling faster data rates compared to conventional single-channel DOCSIS 2.0 cable modems. This device is designed to deliver robust and reliable broadband service.

Les característiques clau inclouen:

• Charter and Cox Approved
• Bonded channels delivering downstream data rates in excess of 160 Mbps and upstream data rates up to 120 Mbps
• Up to four times faster than conventional single-channel DOCSIS 2.0 cable modem
• Backwards compatibility for operation in DOCSIS 2.0, 1.1 and 1.0 networks
• Four bonded downstream channels along with four bonded upstream channels

Figura 1: Frontal view of the Cisco DPC3000 DOCSIS 3.0 Cable Modem, showing indicator lights and the Cisco logo.

Configuració i instal·lació

Follow these steps to set up your Cisco DPC3000 Cable Modem:

1. Connecteu el cable coaxial: Connect one end of the coaxial cable to the cable wall outlet and the other end to the Cable d'entrada port on the back of the DPC3000 modem. Ensure the connection is secure.
2. Connecteu el cable Ethernet: Connect one end of the Ethernet cable to the Ethernet port on the back of the DPC3000 modem. Connect the other end to your computer's Ethernet port or to the WAN/Internet port of your Wi-Fi router.
3. Connecteu l'adaptador de corrent: Connecteu l'adaptador d'alimentació al Poder port on the modem and then into an electrical outlet. The modem will begin its startup sequence.
4. Observeu els llums indicadors: Allow several minutes for the modem to power on and establish a connection. The indicator lights on the front panel will illuminate as the modem connects to your internet service provider (ISP) network. Refer to the Operating section for details on light status.
5. Activa el teu servei: Once the modem lights indicate a stable connection (typically the 'Online' light is solid), you may need to contact your ISP (e.g., Charter, Cox) to activate the modem. Provide them with the modem's Serial Number (S/N) and MAC Address (MAC ID), usually found on a label on the bottom or back of the device. Some ISPs may have an online activation portal that you can access through a connected computer.

Nota: This modem is not compatible with Comcast. It is approved for use with Charter and Cox internet services.

Operating the Modem

The Cisco DPC3000 operates automatically once connected and activated. The front panel features several indicator lights that provide status information:

• Potència: Indicates the modem is powered on.
• DS (Downstream): Indicates downstream channel bonding status. A solid light means a successful connection.
• US (Upstream): Indicates upstream channel bonding status. A solid light means a successful connection.
• En línia: Indicates successful internet connectivity. A solid light means the modem is online and ready.
• Enllaç: Indicates an active Ethernet connection to your computer or router.

For advanced users, the modem may have a simple web-based configuration page accessible via a web browser (e.g., by typing 192.168.100.1 into the address bar). This page typically provides status information such as signal levels, channel usage, and assignments, but offers limited configuration options.

Manteniment

To ensure optimal performance and longevity of your Cisco DPC3000 modem, consider the following maintenance tips:

• Col·locació: Col·loca el mòdem en una zona ben ventilada, allunyada de la llum solar directa, fonts de calor i humitat. Assegura't que hi hagi un flux d'aire adequat al voltant del dispositiu.
• Neteja: Periodically wipe the exterior of the modem with a soft, dry cloth. Do not use liquid cleaners or aerosol sprays.
• Reiniciant: If you experience connectivity issues, a simple restart of the modem can often resolve them. To restart, unplug the power adapter from the modem, wait for 10-15 seconds, and then plug it back in. Allow several minutes for the modem to re-establish its connection.
• Firmware: Firmware updates are typically managed by your Internet Service Provider. Do not attempt to manually update the modem's firmware unless specifically instructed by your ISP.

Resolució de problemes

If you encounter issues with your Cisco DPC3000 modem, refer to the following common problems and solutions:

If problems persist after attempting these solutions, contact your Internet Service Provider for further assistance. They can diagnose issues related to your cable line or service provisioning.

Especificacions

Detailed specifications for the Cisco DPC3000 DOCSIS 3.0 Cable Modem:

• Model: DPC3000
• Dimensions (L x A x A): 7.6 x 5.5 x 2.2 polzades
• Pes de l'article: 2.2 lliures
• Fabricant: Cisco Systems, Inc.
• Tecnologia de connectivitat: USB (for internal diagnostics/firmware, not for user connectivity)
• Total Ethernet Ports: 1 (for connection to computer/router)
• DOCSIS Standard: 3.0 (backward compatible with 2.0, 1.1, 1.0)
• Downstream Channels: 4 bonded channels
• Upstream Channels: 4 bonded channels
• Max Downstream Data Rate: >160 Mbps
• Max Upstream Data Rate: Fins a 120 Mbps
• Compatible ISPs: Charter, Cox (Not compatible with Comcast)

Garantia i Suport

Avís legal: This product is not warrantied by Cisco. Adams Cable Equipment offers a seller warranty of 30 days for return, or 60 days for replacement.

For further support, including technical assistance or detailed product documentation, please refer to the official Cisco support website or contact your Internet Service Provider.

També podeu visitar l'oficial Botiga Cisco a Amazon for more information on Cisco products.