Honeywell VR8204A2076

Honeywell VR8204A2076 Electronic Gas Valve

Manual d'instruccions

1. Introducció

This manual provides essential instructions for the proper installation, operation, and maintenance of the Honeywell VR8204A2076 Electronic Gas Valve. This valve is designed for use in gas-fired, 24 Vac, intermittent pilot appliances with capacities ranging from 20-200 cfh. Please read this manual thoroughly before proceeding with any installation or service.

Honeywell VR8204A2076 Electronic Gas Valve

Image of the Honeywell VR8204A2076 Electronic Gas Valve, showing its compact design and connection points. This valve is a critical component for controlling gas flow in heating systems.

2. Informació de seguretat

ADVERTIMENT: La instal·lació, l'ajustament, l'alteració, el servei o el manteniment inadequats poden causar danys a la propietat, lesions o la mort. Llegiu atentament les instruccions d'instal·lació, funcionament i manteniment abans d'instal·lar o donar servei a aquest equip.

3. Configuració (Instal·lació)

The Honeywell VR8204A2076 gas valve is designed for straightforward installation, but it requires adherence to specific procedures to ensure safe and efficient operation. Always consult local codes and regulations.

3.1 Comprovacions prèvies a la instal·lació

3.2 Mounting the Valve

  1. Mount the valve with the valve body in any position from vertical to 90 degrees in either direction from the vertical. Do not mount with the valve body more than 90 degrees from the vertical.
  2. Ensure adequate clearance for wiring and service.

3.3 Conduccions de gas

  1. Install a sediment trap in the gas supply line to the valve.
  2. Use pipe compound resistant to LP gas if applicable. Do not apply compound to the first two pipe threads.
  3. Connect the gas supply line to the 1/2" inlet and the appliance manifold to the 1/2" outlet.
  4. Tighten all pipe connections securely.

3.4 Cablejat

  1. Follow the appliance manufacturer's wiring diagrams.
  2. Connect the 24 Vac power supply to the appropriate terminals on the valve.
  3. Ensure all wiring connections are tight and secure.

3.5 Prova de fuites

  1. After all connections are made, open the main gas supply.
  2. Check all gas connections with a soap solution for leaks. Bubbles indicate a leak.
  3. If a leak is detected, tighten the connection or replace the component. Never use a flame to check for gas leaks.

4. Instruccions de funcionament

The Honeywell VR8204A2076 is an electronic gas valve designed for intermittent pilot ignition systems. Its operation is typically controlled by a thermostat and an ignition control module.

4.1 Normal Operation Sequence

  1. When the thermostat calls for heat, the ignition control module receives a signal.
  2. The ignition control module then sends 24 Vac to the pilot solenoid of the gas valve, opening the pilot gas port.
  3. Simultaneously, the ignition control module initiates a spark to ignite the pilot flame.
  4. Once the pilot flame is established and proven by the flame sensor, the ignition control module energizes the main valve solenoid.
  5. The main valve opens, allowing gas to flow to the main burners, which are then ignited by the pilot flame.
  6. When the thermostat is satisfied, the ignition control module de-energizes the main and pilot solenoids, closing the gas valve and shutting off the burners.

This valve features a standard opening and a 3.5" wc pressure regulator setting, ensuring consistent gas flow to the appliance.

5. Manteniment

The Honeywell VR8204A2076 Electronic Gas Valve is designed for reliable operation and generally requires minimal maintenance. However, periodic inspection by a qualified service technician is recommended to ensure continued safe and efficient performance.

Always disconnect the power supply to the appliance before any maintenance or inspection procedures.

6. Solució De Problemes

This section provides guidance for common issues. For complex problems or if you are unsure, contact a qualified service technician.

ProblemaCausa possibleSolució
No heat / Burners do not ignite
  • No power to the appliance/valve
  • El termòstat no demana calor
  • Pilot light not igniting or proving
  • Subministrament de gas desactivat
  • Faulty ignition control module
  • Comproveu l'interruptor/fusible.
  • Ajusta la configuració del termòstat.
  • Inspect pilot assembly and flame sensor.
  • Ensure main gas valve is open.
  • Consulteu un tècnic qualificat.
Pilot ignites, but main burners do not
  • Pilot flame not strong enough to prove
  • Faulty main valve solenoid
  • Baixa pressió de gas
  • Netegeu l'orifici pilot.
  • Consult a qualified technician for valve replacement.
  • Contact gas supplier or technician to check pressure.
S'ha detectat una olor de gas
  • Fuita de gas
  • Immediately shut off gas supply. Open windows. Do not operate electrical switches. Contact gas supplier and a qualified technician.

7. Especificacions

Key technical specifications for the Honeywell VR8204A2076 Electronic Gas Valve:

CaracterísticaDetall
Número de modelVR8204A2076
FabricantHoneywell
Voltage24 Vac
Tipus de vàlvulaElectronic Gas Valve, Intermittent Pilot
Mida d'entrada/sortida1/2" x 1/2"
Configuració del regulador de pressió3.5" wc (water column)
Opening TypeEstàndard
Components inclososL.P. Kit
Pes de l'article2.04 lliures
Dimensions del producte5.75 x 4.72 x 3.31 polzades
CertificacióLlistat UL

8. Informació de la garantia

According to product information, there is no specific warranty description provided for the Honeywell VR8204A2076 Electronic Gas Valve. Please refer to your point of purchase or Honeywell's official website for any applicable warranty terms and conditions that may apply at the time of purchase.

9. Atenció al client

For technical assistance, troubleshooting beyond this manual, or to locate a qualified service professional, please contact Honeywell customer support or visit their official website. When contacting support, please have your product model number (VR8204A2076) readily available.

Oficial de Honeywell Weblloc: www.honeywell.com

Documents relacionats - VR8204A2076

Preview Manual d'instal·lació i funcionament de la vàlvula de gas moduladora del receptor de mil·livolts Honeywell RV8310D,E
Guia completa de la vàlvula de gas moduladora amb receptor de mil·livolts Honeywell RV8310D,E, que cobreix les especificacions, les instruccions d'instal·lació, el funcionament, la comprovació, el manteniment i els procediments de servei per a un ús segur i eficient.
Preview Control de gas combinat de mil·livolts Honeywell VS8510/VS8520: dades del producte i guia d'instal·lació
Dades completes del producte, especificacions, instruccions d'instal·lació i informació de servei per a les vàlvules de control de gas combinades de mil·livolts Honeywell VS8510 i VS8520, utilitzades en diversos aparells de gas. Aquest document proporciona detalls tècnics, advertències de seguretat i guia operativa.
Preview Manual d'usuari del controlador multigas PolyGard®2 MGC2-K
Manual d'usuari complet per al controlador multigas Honeywell PolyGard®2 MGC2, que cobreix l'ús previst, la instal·lació, el funcionament, les especificacions tècniques, el manteniment i les directrius de seguretat.
Preview Guia d'instal·lació del termopar de desconexión ràpida Honeywell Q335
Instruccions d'instal·lació i especificacions tècniques per al termopar de desconexión ràpida Honeywell Q335, utilitzat amb les vàlvules de gas de milivolts VS8520. Inclou avisos de seguretat i procediments d'arrencada.
Preview Instruccions d'instal·lació del kit de substitució de la vàlvula de gas Honeywell VR8205
Guia d'instal·lació completa per substituir les vàlvules de gas de la sèrie Honeywell VR8205. Aquest document proporciona instruccions pas a pas, avisos de seguretat i procediments per convertir a gas LP/propà, comprovar i ajustar la pressió del col·lector i encendre l'aparell.
Preview Manual d'instal·lació i funcionament de la vàlvula de gas de milivolts Honeywell VS8510, VS8520
This document provides installation, operation, and troubleshooting instructions for the Honeywell VS8510 and VS8520 Millivolt Gas Valves. It covers specifications, conversion between natural and LP gas, wiring, safety precautions, and maintenance.