Oregon 95-076 Replacement Lawn Mower Blade User Manual

1. Producte acabatview

The Oregon 95-076 is a standard replacement lawn mower blade designed for AYP lawn mowers, specifically those requiring a 21-15/16 inch blade. This blade is engineered to provide efficient cutting performance for a 21-inch walk-behind mower.

Les característiques clau inclouen:

• Longitud: 21-15/16 polzades
• Center Hole Size: 5/8 inch Star pattern
• Designed for 21-inch walk-behind mowers
• Amplada: 2 1/4 polzades
• Gruix: 0.134 polzades

Figura 1: superior view of the Oregon 95-076 Replacement Lawn Mower Blade, showing its overall shape and star-shaped center hole.

2. Informació de seguretat

Always prioritize safety when handling or installing lawn mower blades. Failure to follow safety instructions can result in serious injury.

• Desconnecteu la bugia: Before performing any maintenance or installation on your lawn mower, always disconnect the spark plug wire to prevent accidental engine starting.
• Utilitzeu equip de protecció: Always wear heavy-duty gloves and eye protection when handling the blade. Blades are sharp and can cause cuts.
• Assegureu la segadora: Ensure the lawn mower is stable and cannot tip over during blade removal or installation. Use appropriate blocking if necessary.
• Inspeccionar per danys: Before installation, inspect the new blade for any shipping damage.
• Eliminació adequada: Dispose of old blades responsibly and safely.

3. Instruccions d'instal·lació

Follow these steps to safely replace your lawn mower blade:

1. Prepareu la segadora: Ensure the engine is off and cool. Disconnect the spark plug wire to prevent accidental starting.
2. Position the Mower: Tilt the mower onto its side with the carburetor facing upwards to prevent fuel leakage. Ensure it is stable.
3. Treure la fulla antiga: Using a block of wood to prevent the blade from turning, loosen the blade bolt(s) with a wrench. Remove the old blade, washer(s), and any other hardware. Note the orientation of the old blade for correct installation of the new one.
4. Neteja l'àrea de muntatge: Netegeu qualsevol retall d'herba o restes de la zona de muntatge de les fulles a la plataforma del tallador de gespa.
5. Instal·leu la nova fulla: Position the new Oregon 95-076 blade with the cutting edges facing the direction of rotation (usually towards the deck). Ensure the star-shaped center hole aligns correctly with the mower's spindle. Reinstall any washers and the blade bolt(s).
6. Estrenyeu el cargol de la fulla: Torque the blade bolt(s) to the manufacturer's recommended specifications (typically 30-40 lb-ft for most walk-behind mowers). Ensure the blade is securely fastened and does not wobble.
7. Torneu a connectar la bugia: Un cop la fulla estigui instal·lada correctament, torneu a connectar el cable de la bugia.

Figure 2: The Oregon 95-076 blade as it appears in its packaging, highlighting the product label and star hole.

4. Consideracions operatives

Once the new blade is installed, ensure it is balanced and properly secured before operating the mower. A properly installed and balanced blade will reduce vibration and provide a clean cut.

• Equilibri de la fulla: An unbalanced blade can cause excessive vibration, leading to premature wear on mower components and an uneven cut. If you notice unusual vibration after installation, check the blade's balance.
• Altura de tall: Adjust your mower's cutting height according to grass type and desired lawn appearance.
• Evitar obstacles: Always clear the mowing area of debris, rocks, and other obstacles that could damage the blade or cause injury.

5. Manteniment

El manteniment regular de la fulla de la tallagespa garanteix un rendiment òptim i n'allarga la vida útil.

• Inspecció periòdica: Periodically inspect the blade for nicks, bends, cracks, or excessive wear. Replace the blade if it shows signs of significant damage.
• Neteja: After each use, clean grass clippings and debris from the underside of the mower deck and the blade. This prevents buildup that can affect cutting performance and balance.
• Afilat: The blade should be sharpened regularly, depending on usage and grass conditions. A sharp blade provides a clean cut, which is healthier for your lawn. When sharpening, maintain the original blade angle and ensure the blade remains balanced.
• Equilibri: After sharpening or if you notice vibration, check the blade's balance using a blade balancer. An unbalanced blade can cause excessive vibration and damage to the mower.

Figura 3: Angle view of the Oregon 95-076 blade, showing the cutting edge and overall profile.

6. Solució De Problemes

If you encounter issues after installing your new blade, consider the following:

• Vibració excessiva: This is often caused by an unbalanced blade or improper installation. Re-check the blade's balance and ensure the blade bolt is tightened to the correct torque. Inspect the blade for any bends or damage from hitting an object.
• Uneven Cut / Ragged Grass: This indicates a dull or damaged blade. Sharpen or replace the blade. Also, ensure the blade is installed with the cutting edge facing the correct direction.
• Blade Not Spinning: Ensure the blade bolt is not overtightened, which can bind the blade. Check for any obstructions under the deck.

7. Especificacions

8. Garantia i Suport

Specific warranty details for the Oregon 95-076 Replacement Lawn Mower Blade are not provided in this manual. For warranty information or technical support, please refer to the official Oregon product website or contact Oregon customer service directly.

You can often find more information on the manufacturer's official weblloc:

Oregon Products Official Weblloc