Introducció
Thank you for choosing the WOODCRAFT Woodshop Clock with integrated Thermometer and Hygrometer. This versatile instrument is designed to provide accurate timekeeping along with essential environmental readings for your workspace. Its robust design and clear display make it an ideal addition to any woodshop or similar environment.
Les característiques clau inclouen:
- 10-inch diameter clock face with chrome hands for easy readability.
- Integrated thermometer displaying temperature in 5-degree Fahrenheit increments.
- Integrated hygrometer displaying relative humidity in 2% intervals.
- Durable construction suitable for various environments.
Figura 1: Frontal view of the Woodshop Clock, displaying the time, temperature, and humidity.
Configuració
1. Instal·lació de la bateria
The Woodshop Clock requires one (1) AA battery (not included) for its quartz movement. To install the battery:
- Localitzeu el compartiment de la bateria a la part posterior del rellotge.
- Obriu la tapa del compartiment de la bateria.
- Inseriu una pila AA, assegurant-vos que els terminals positiu (+) i negatiu (-) s'alineïn correctament amb les marques de l'interior del compartiment.
- Tanqueu bé la tapa del compartiment de la bateria.
2. Configuració de l'hora
After installing the battery, set the time:
- Localitzeu el botó de configuració de l'hora a la part posterior del mecanisme del rellotge.
- Gently rotate the knob clockwise or counter-clockwise until the clock hands display the correct time.
3. Col·locació
For optimal performance and accurate readings from the thermometer and hygrometer, consider the following placement guidelines:
- Place the clock in a location that is representative of the general temperature and humidity of your woodshop or desired area.
- Avoid direct sunlight, heat sources (e.g., heaters, vents), or areas with extreme drafts, as these can affect the accuracy of the temperature and humidity readings.
- Ensure the clock is mounted securely on a wall or placed on a stable surface.
Figure 2: Dimensions of the Woodshop Clock, showing its 10-inch diameter.
Funcionament
Reading the Clock
The main dial displays the current time with clear hour, minute, and second hands. The large 10-inch black face with chrome hands and markings ensures easy readability from a distance.
Reading the Thermometer
The thermometer dial is located on the lower left side of the clock face. It displays the ambient temperature in Fahrenheit, with markings in 5-degree increments. The red needle indicates the current temperature.
Reading the Hygrometer
The hygrometer dial is located on the lower right side of the clock face. It displays the relative humidity as a percentage, with markings in 2% intervals. The red needle indicates the current relative humidity.
Figura 3: Detall view of the thermometer and hygrometer for precise readings.
Manteniment
Canvi de bateria
When the clock hands begin to slow down or stop, it is an indication that the AA battery needs to be replaced. Follow the battery installation steps outlined in the "Setup" section.
Neteja
To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the clock face or mechanism, as this may damage the finish or internal components.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Clock not keeping accurate time or stopped. | Bateria baixa o esgotada. | Replace the AA battery with a fresh one. Ensure correct polarity. |
| Clock not keeping accurate time or stopped. | Mechanism issue. | Ensure the time-setting knob is not stuck or damaged. If the issue persists after battery replacement, contact customer support. |
| Inaccurate thermometer or hygrometer readings. | Improper placement (e.g., direct sunlight, near heat source, strong drafts). | Relocate the clock to a more stable environment, away from direct heat, cold, or drafts. Allow time for the readings to stabilize in the new location. |
| Inaccurate thermometer or hygrometer readings. | Sensor obstruction or damage. | Ensure nothing is blocking the sensor areas on the back or sides of the clock. If damage is visible, contact customer support. |
Especificacions
- Dimensions del producte: 9.9 x 9.9 x 2.1 polzades
- Pes de l'article: 1.37 lliures
- Número de model: 146137W
- Font d'alimentació: 1 x piles AA (no incloses)
- Visualització de la temperatura: Fahrenheit, 5-degree increments
- Pantalla d'humitat: Relative Humidity (%), 2% intervals
- Fabricant: Woodcraft Supply
Garantia
WOODCRAFT products are manufactured to high-quality standards. For specific warranty information regarding your Woodshop Clock, please refer to the packaging or contact WOODCRAFT customer support directly. Keep your purchase receipt as proof of purchase.
Atenció al client
If you have any questions, require assistance, or encounter issues not covered in this manual, please contact WOODCRAFT customer support:
- Weblloc: www.woodcraft.com (Please note: This is a general example, actual support contact details may vary. Refer to product packaging for official contact information.)
- Telèfon: Refer to the WOODCRAFT weblloc web o embalatge del producte per obtenir números de contacte actuals.
When contacting support, please have your product model number (146137W) and purchase details ready.
