1. Introducció
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your DAC Ventilated Height and Angle Adjustable Laptop Stand Riser, model MP-195. Designed for laptops and notebook computers ranging from 13 to 18 inches, this stand aims to improve ergonomic posture and promote laptop cooling. Please read this manual thoroughly before use to ensure proper setup and optimal performance.
2. Contingut del paquet
Verifiqueu que tots els components siguin presents al paquet:
- 1 x plataforma
- 4 x Leg Blocks (two sets for different heights)
- 8 x Adhesive Non-skid Foam Pads
- 1 x Instruction Sheet (this document)
Image 2.1: All components of the DAC Laptop Stand, including the main platform, two sets of leg blocks for height adjustment, and non-skid foam pads.
3. Muntatge i muntatge
- Choose Height Setting: The stand offers three height and angle adjustments. Select one of the two sets of leg blocks provided. The shorter set provides a lower elevation, while the taller set provides a higher elevation. The leg blocks are designed to be used individually, not stacked.
Image 3.1: Illustration of the three possible height and angle configurations for the laptop stand, achieved by using different leg block sets.
- Attach Leg Blocks: Insert the chosen leg blocks into the designated slots on the underside of the platform. Ensure they are securely fitted.
Image 3.2: The underside of the stand, highlighting the slots where the leg blocks are to be inserted for height adjustment.
- Apply Non-skid Foam Pads: Peel the backing from the adhesive non-skid foam pads and apply them to the bottom of the leg blocks and the front support points of the stand. These pads prevent the stand from sliding on your desk surface.
Imatge 3.3: Una imatge detallada view showing the placement of the non-skid foam pads on the base of the stand, designed to enhance stability.
- Position Laptop: Place your laptop or notebook computer on the stand. The front lip of the stand will secure the laptop in place.
Image 3.4: The DAC Laptop Stand with a laptop positioned on its surface, demonstrating its intended use.
4. Instruccions de funcionament
The DAC Laptop Stand is designed for straightforward use. Once assembled, simply place your laptop on the platform.
- Ajust ergonòmic: Adjust the height by selecting the appropriate leg blocks to achieve an ergonomic viewing angle. Your eyes should look slightly down when viewing the middle of the screen to reduce neck strain.
- Ventilació: The ventilated platform design allows for improved airflow around your laptop, helping to prevent overheating.
- Gestió de cables: Utilize the six integrated slots at the rear of the stand to organize and route your cables, keeping them "connection ready" and your workspace tidy.
Image 4.1: The rear of the stand featuring six slots designed for organizing and managing cables.
5. Manteniment
The DAC Laptop Stand requires minimal maintenance.
- Neteja: Netegeu el suport amb un drap suauamp cloth. Avoid using abrasive cleaners or solvents, as these may damage the material.
- Inspecció: Periodically check the leg blocks and non-skid pads for wear and tear. Replace if necessary to maintain stability.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Stand slides on desk surface. | Non-skid pads are missing or worn. | Ensure all 8 non-skid foam pads are properly attached to the bottom of the leg blocks and front support points. Replace worn pads if needed. |
| Laptop feels unstable on the stand. | Leg blocks not securely inserted or incorrect size for desired height. | Verify that the leg blocks are fully inserted into their slots. Ensure you are using one complete set of leg blocks (either short or tall) and not a mix. |
| Cables are not organized effectively. | Cables are not routed through the designated slots. | Utilize the six cable management slots at the rear of the stand to neatly route and secure your cables. |
7. Especificacions
| Característica | Detall |
|---|---|
| Número de model | MP-195 |
| Material | Poliestirè d'alt impacte (HIPS) |
| Mida de la plataforma | 13 x 11.75 polzades |
| Adjustable Height Options | 2, 2.3, or 2.6 inches (3 levels) |
| Compatibilitat | Laptops/Notebooks from 13 to 18 inches |
| Color | Negre |
| Pes de l'article | 12.8 unces |
| Dimensions del producte | 11.75 x 12 x 2 inches (base dimensions without height adjustment) |
| Gestió de cables | 6 integrated slots |
8. Informació de la garantia
The product information mentions a "Lifetime warranty". For specific details regarding warranty coverage, terms, and conditions, please refer to the official DAC product website or contact DAC customer support.
9. Atenció al client
For further assistance, technical support, or inquiries regarding your DAC Ventilated Height and Angle Adjustable Laptop Stand Riser, please visit the official DAC weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
Recursos en línia: Visit the DAC Store on Amazon
