Seco-Larm Enforcer SD-9263-KSVQ No Touch Request-to-Exit Plate User Manual

1. Introducció

The Seco-Larm Enforcer SD-9263-KSVQ is an outdoor-rated, no-touch request-to-exit plate designed for controlled access systems. It utilizes infrared (IR) technology to detect hand waves, activating a door release without physical contact. This unit is ideal for environments requiring high hygiene standards. It also features a mechanical override for emergency or power failure situations.

2. Característiques clau

• No-Touch Activation: Activates with a simple wave of the hand, minimizing contact.
• Adjustable Sensor Range: Detection range can be set from 2 to 7 inches (5 to 18 cm).
• Feedback visual: A ring illuminator changes color (red to green or green to red, selectable) upon activation.
• Anul·lació mecànica: Includes a manual button for door operation, even during power outages.
• Construcció duradora: Made from stainless steel with an IP65 weatherproof rating for outdoor use.
• Cablejat fàcil: Features a quick-connect screwless terminal block for simplified installation.
• Adjustable Trigger Duration: Output relay trigger duration is adjustable from 0.5 to 20 seconds, or set to toggle mode.

3. Configuració i instal·lació

Proper installation is crucial for the optimal performance and longevity of the Seco-Larm Enforcer No Touch Request-to-Exit Plate. This device is designed for door mount applications.

3.1 Contingut del paquet

• Seco-Larm Enforcer No Touch Request-to-Exit Plate (SD-9263-KSVQ)
• Maquinari de muntatge
• Keys for mechanical override

3.2 Muntatge

1. Select a suitable location on the door frame or wall adjacent to the door, ensuring it is within easy reach for users.
2. Use the provided mounting hardware to securely attach the plate. Ensure the plate is level and firmly fixed to prevent movement.
3. Route necessary wiring through the wall or door frame to the quick-connect terminal block on the back of the plate.

3.3 Cablejat

Connect the plate to your access control system or door strike using the screwless terminal block. Refer to your access control system's manual for specific wiring diagrams. The plate includes a 1A relay output.

• Entrada d'alimentació: Connect to a stable power source (typically 12V DC).
• Sortida de relé: Connect to the door strike or access control panel's input.
• Terra: Ensure proper grounding for safe operation.

Note: All wiring should be performed by a qualified technician in accordance with local electrical codes.

Figura 1: Davant view of the Seco-Larm Enforcer No Touch Request-to-Exit Plate. It features a brushed stainless steel finish, an illuminated IR sensor with a hand icon, and a mechanical override button. Text on the plate indicates 'WAVE TO OPEN' and 'ENFORCER'.

4. Instruccions de funcionament

4.1 No-Touch Activation

1. Approach the Seco-Larm Enforcer plate.
2. Wave your hand within the adjustable sensor range (2 to 7 inches) of the IR sensor.
3. The ring illuminator will change color (e.g., from red to green) to indicate successful activation.
4. The door will unlock or open according to the configured trigger duration.

4.2 Mechanical Override

In the event of a power failure or if no-touch activation is not desired, the mechanical override can be used.

1. Locate the manual override button on the plate.
2. Press the button to activate the door release mechanism.

4.3 Adjusting Sensor Range and Trigger Duration

The sensor range and trigger duration can be adjusted via internal potentiometers or dip switches (refer to the detailed wiring diagram provided with the product for exact locations and procedures).

• Rang del sensor: Adjust to suit the environment, typically between 2 and 7 inches. Avoid setting it too sensitive in high-traffic areas to prevent false activations.
• Durada del disparador: Set the time the relay remains active (0.5 to 20 seconds) or select toggle mode for continuous activation until a second wave.

5. Manteniment

The Seco-Larm Enforcer No Touch Request-to-Exit Plate requires minimal maintenance due to its durable stainless steel construction and IP65 rating.

• Neteja: Periodically wipe the surface with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners or solvents that could damage the finish or sensor.
• Inspecció: Regularly check for any signs of physical damage or loose connections. Ensure the mounting remains secure.
• Rendiment del sensor: Test the no-touch activation periodically to ensure the sensor is functioning correctly and its range is appropriate for the environment.

6. Solució De Problemes

If you encounter issues with your Seco-Larm Enforcer No Touch Request-to-Exit Plate, refer to the following common problems and solutions:

7. Especificacions

• Model: SD-9263-KSVQ
• Material: Acer inoxidable
• Dimensions: 4.53 x 2.76 x 0.4 polzades (115 x 70 x 10 mm)
• Pes de l'article: 4.8 unces (136 grams)
• Tipus de sensor: Infrarojos (IR)
• Rang del sensor: Adjustable 2 to 7 inches (5 to 18 cm)
• Sortida de relé: 1A
• Durada del disparador: Adjustable 0.5 to 20 seconds or Toggle
• Resistència a la intempèrie: IP65
• Tipus de muntatge: Muntatge de la porta
• Components inclosos: Light (illuminator)

8. Garantia i Suport

8.1 Informació de la garantia

This Seco-Larm Enforcer product is covered by a Garantia limitada de 1 anys des de la data de compra. Aquesta garantia cobreix els defectes de materials i fabricació en condicions d'ús normal. No cobreix els danys resultants d'un mal ús, accidents, modificacions no autoritzades o instal·lació incorrecta.

8.2 Suport tècnic

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Seco-Larm customer support. Have your product model number (SD-9263-KSVQ) and date of purchase ready when contacting support.

Please visit the official Seco-Larm weblloc web per obtenir la informació de contacte i els recursos d'assistència més actualitzats.