Laica Stream Line Water Filter Pitcher User Manual

1. Introducció

Thank you for choosing the Laica Stream Line Water Filter Pitcher. This pitcher is designed to filter tap water, improving its taste and reducing unwanted substances such as heavy metals, chlorine, chemical contaminants, water hardness, pesticides, and herbicides. Please read this manual carefully before first use to ensure proper operation and maintenance of your product.

2. Components del producte

The Laica Stream Line Water Filter Pitcher consists of the following main components:

• Cos del llançador: The main container for filtered water.
• Funnel/Reservoir: Holds the unfiltered water and the filter cartridge.
• Tapa: Features a quick-fill flap for easy refilling and an electronic filter life indicator.
• Bi-Flux Filter Cartridge: The filtration element.

Image: The Laica Stream Line pitcher, highlighting its slim design, elegant colored lid, BPA-free material, and the inclusion of one Bi-Flux filter cartridge, capable of filtering up to 150 liters of water.

3. Instruccions de configuració

3.1 Desembalatge i neteja inicial

1. Traieu tots els components de l'embalatge.
2. Wash the pitcher body, funnel, and lid with warm water and a mild detergent. Rinse thoroughly. Do not wash the electronic indicator in a dishwasher or immerse it in water.
3. Assequeu completament totes les peces abans del muntatge.

3.2 Preparing the Bi-Flux Filter Cartridge

1. Remove the Bi-Flux filter cartridge from its protective packaging.
2. Immerse the filter cartridge completely in cold water for approximately 15 minutes. Gently shake it to remove any air bubbles. This step is crucial for optimal filter performance.

3.3 Muntatge del càntir

1. Insert the prepared Bi-Flux filter cartridge firmly into the opening at the bottom of the funnel/reservoir. Ensure it is securely seated to prevent unfiltered water from bypassing the filter.
2. Place the assembled funnel/reservoir into the pitcher body.
3. Attach the lid to the pitcher body.

3.4 Initial Filtration Cycles

1. Fill the funnel with tap water. Allow the water to filter through completely.
2. Discard the first two filtered batches of water. This primes the filter and removes any loose carbon particles.
3. The pitcher is now ready for use.

3.5 Setting the Electronic Filter Life Indicator

1. Locate the electronic indicator on the lid.
2. Press and hold the START button until the display shows 100% or the indicator lights up fully. This resets the timer for a new filter cartridge.
3. The indicator will count down the filter's lifespan, typically 30 days or 150 liters, whichever comes first.

Image: The Laica Stream Line pitcher, illustrating the electronic filter life monitor on the lid, which allows users to track the filter's remaining lifespan.

4. Instruccions de funcionament

4.1 Filling the Pitcher

1. Lift the quick-fill flap on the lid.
2. Place the pitcher under a tap and fill the funnel/reservoir with cold tap water. Do not overfill beyond the maximum fill line.
3. Close the quick-fill flap. The water will slowly filter into the main pitcher body.

Image: The Laica Stream Line pitcher, demonstrating the quick-fill flap for convenient and effortless refilling of the water reservoir.

4.2 Using Filtered Water

Once the water has filtered through, it is ready for consumption. The pitcher has a total capacity of 2.3 liters, with a filtered water capacity of 1.2 liters, ensuring a fresh supply for your household.

Image: The Laica Stream Line pitcher, illustrating its generous capacity with a total volume of 2.3 liters and a filtered water reservoir of 1.2 liters.

5. Manteniment

5.1 Cleaning the Pitcher

Regular cleaning is essential to maintain hygiene and performance.

• Wash the pitcher body and funnel/reservoir regularly with warm soapy water.
• The lid (without the electronic indicator) can also be washed by hand.
• No utilitzeu netejadors ni fregalls abrasius.
• The electronic indicator should only be wiped clean with a damp tela. No el submergiu en aigua.
• All parts, except the electronic indicator, are dishwasher safe (top rack recommended).

5.2 Substitució del cartutx del filtre

The Bi-Flux filter cartridge should be replaced every 30 days or after filtering 150 liters of water, whichever comes first. The electronic indicator will alert you when a replacement is due.

1. Remove the old filter cartridge from the funnel/reservoir. Dispose of it responsibly.
2. Prepare a new Bi-Flux filter cartridge as described in Section 3.2.
3. Insert the new filter cartridge into the funnel/reservoir.
4. Reset the electronic filter life indicator as described in Section 3.5.
5. Perform the initial filtration cycles (discarding the first two batches) as described in Section 3.3.

Image: A Laica Bi-Flux filter cartridge, detailing the unwanted substances it reduces, including heavy metals, chlorine, chemical contaminants, water hardness, pesticides, and herbicides.

5.3 Emmagatzematge

If the pitcher will not be used for an extended period, remove the filter cartridge, clean all components, and store them in a cool, dry place away from direct sunlight.

6. Solució De Problemes

7. Especificacions

8. Informació de seguretat

• Only use cold tap water with the pitcher. Do not filter hot water.
• Do not expose the pitcher to direct sunlight for extended periods.
• Mantenir fora de l'abast dels nens.
• Ensure the filter cartridge is always submerged in water to prevent it from drying out, which can reduce its effectiveness.
• Replace the filter cartridge as recommended to ensure optimal filtration performance and hygiene.

9. Garantia i Suport

Laica products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Laica website. For technical support, replacement parts, or further assistance, please contact Laica customer service through their official channels.

You can find more information and contact details on the official Laica weblloc: www.laica.com