1. Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Johnson Controls A19ADB-2 Direct Immersion Temperature Controller. This device is designed for precise temperature regulation in various industrial and scientific applications, specifically within a 100/240°F range. Please read this manual thoroughly before attempting any installation or operation to ensure safe and efficient use of the product.
2. Informació de seguretat
ADVERTIMENT: Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Read and understand these instructions completely before proceeding.
- Always disconnect power before servicing the unit to prevent electrical shock.
- Assegureu-vos que tot el cablejat compleixi amb els codis elèctrics locals i nacionals.
- La instal·lació només l'ha de fer personal qualificat.
- No supereu les capacitats elèctriques especificades del dispositiu.
- Protect the device from moisture and extreme temperatures outside its operating range.
3. Producte acabatview
The Johnson Controls A19ADB-2 is a direct immersion temperature controller designed for applications requiring precise temperature sensing and control. It features a robust housing and an immersion bulb for direct contact with the medium being controlled. The unit is capable of operating within a temperature range of 100°F to 240°F.
Figura 1: Johnson Controls A19ADB-2 Direct Immersion Temperature Controller. This image shows the main unit with its gray protective casing, a visible adjustment dial on the top, and the copper immersion bulb extending from the right side, designed for direct contact with the controlled medium.
Característiques principals:
- Direct immersion sensing for accurate temperature measurement.
- Adjustable setpoint within 100°F to 240°F range.
- Durable construction suitable for industrial environments.
- Open-high (m/r open-hi) contact configuration.
4. Configuració i instal·lació
Installation of the A19ADB-2 controller requires careful attention to detail and adherence to safety protocols. It is recommended that installation be performed by a certified technician.
4.1 Muntatge del controlador
- Select a suitable location for mounting the controller, ensuring it is easily accessible for adjustments and maintenance, and protected from excessive vibration or physical damage.
- Ensure the immersion bulb can be fully submerged in the medium whose temperature is to be controlled.
- Securely fasten the controller housing using appropriate mounting hardware.
4.2 Cablejat elèctric
PRECAUCIÓ: Disconnect all power before making electrical connections.
- Refer to the wiring diagram provided with the unit (not included in this general manual) for specific connection points.
- Connecteu els cables d'alimentació als terminals designats.
- Connect the load wires (e.g., to a heater or cooling element) to the appropriate control terminals.
- Assegureu-vos que totes les connexions estiguin ben ajustades i segures per evitar contactes solts i possibles perills.
5. Instruccions de funcionament
Once installed and wired, the A19ADB-2 controller is ready for operation.
5.1 Setting the Temperature Setpoint
- Locate the adjustment knob on the top of the controller housing (refer to Figure 1).
- Rotate the knob to align the desired temperature with the indicator mark. The temperature range is 100°F to 240°F.
- The controller will now maintain the temperature of the immersed medium at or around the setpoint.
5.2 Understanding Control Action
The A19ADB-2 features an "open-high" (m/r open-hi) contact configuration. This typically means the control contacts open when the sensed temperature rises above the setpoint, and close when the temperature falls below the setpoint. This action is suitable for applications where the controlled device (e.g., a heater) needs to be turned off when the temperature is too high.
6. Manteniment
The Johnson Controls A19ADB-2 is designed for reliable operation with minimal maintenance. However, periodic checks can help ensure its longevity and accuracy.
- Neteja: Keep the exterior of the controller clean and free from dust and debris. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Connexions: Periodically inspect electrical connections for tightness and signs of corrosion.
- Immersion Bulb: Ensure the immersion bulb is clean and free from buildup that could affect temperature sensing accuracy.
- Calibració: While the unit is factory calibrated, if precise accuracy is critical and deviations are suspected, professional recalibration may be required.
7. Solució De Problemes
This section provides solutions to common issues encountered with the A19ADB-2 temperature controller.
| Problema | Causa possible | Solució |
|---|---|---|
| El controlador no respon | No power supply; Loose wiring; Blown fuse/tripped breaker. | Check power connections; Verify wiring integrity; Reset breaker/replace fuse. |
| Lectura de temperatura inexacta | Immersion bulb not fully immersed; Buildup on bulb; Controller out of calibration. | Ensure full immersion; Clean the bulb; Contact service for recalibration. |
| Temperature fluctuates widely | Improper setpoint; External environmental factors; Controller malfunction. | Adjust setpoint; Shield from drafts/heat sources; Contact service if malfunction suspected. |
If troubleshooting steps do not resolve the issue, contact Johnson Controls technical support or a qualified service technician.
8. Especificacions
| Atribut | Detall |
|---|---|
| Model | A19ADB-2 |
| Marca | Johnson Controls |
| Interval de temperatura | De 100 °F a 240 °F |
| Acció de control | Open-High (m/r open-hi) |
| Tipus | Direct Immersion Temperature Controller |
| Número d'estoc nacional | 5930-01-424-8404 |
| Fabricant | Johnson Controls, Inc. |
9. Garantia i Suport
For specific warranty information regarding your Johnson Controls A19ADB-2, please refer to the documentation included with your purchase or visit the official Johnson Controls website. For technical support, service, or parts, please contact Johnson Controls customer service directly.
Informació de contacte: Please refer to the official Johnson Controls weblloc web per obtenir les dades de contacte més actualitzades.
