Introducció
This manual provides instructions for the proper setup, operation, and maintenance of your Targus TGT-BK58T 58-Inch 3-Way Panhead Tripod. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
The Targus TGT-BK58T tripod is designed to provide stable support for cameras and camcorders, featuring a 3-way fluid panhead, quick-release plate, and quick-release leg locks for ease of use. It extends to a maximum height of 58 inches and folds to 23 inches for portability.
Contingut del paquet
- Targus TGT-BK58T 58-Inch 3-Way Panhead Tripod
- Quick-Release Plate (pre-attached or separate)
- Maleta de transport
Configuració
1. Desplegament del trípode
- Remove the tripod from its carrying case.
- Gently spread the tripod legs outwards until they are fully extended or at your desired angle.
- To extend the legs, open the quick-release leg locks on each section. Pull the leg sections to the desired height and then close the quick-release leg locks firmly to secure them.
2. Attaching Your Camera/Camcorder
The tripod features a quick-release plate for easy attachment and detachment of your device.
- Locate the quick-release plate on the panhead. If it's attached, release the locking mechanism (usually a lever or knob) and slide the plate off.
- Screw the quick-release plate onto the tripod mounting thread on the bottom of your camera or camcorder. Ensure it is securely tightened.
- Slide the camera with the attached quick-release plate back into the panhead receiver until it clicks or locks into place. Secure the locking mechanism.
Image: Targus TGT-BK58T 58-Inch 3-Way Panhead Tripod. This image shows the tripod fully extended with a camera mounted on the panhead, illustrating its typical use.
Instruccions de funcionament
1. Adjusting Height and Stability
- Extensió de cames: Use the quick-release leg locks to adjust the height of each leg section independently. Ensure all locks are securely fastened before use.
- Columna central: The center column can be raised or lowered for additional height adjustment. Loosen the center column lock knob, adjust the column, and then tighten the knob firmly.
- Nivell de bombolla: Utilize the integrated bubble level on the panhead to ensure your tripod is perfectly level for straight horizons and stable shots. Adjust leg lengths as needed to achieve level.
2. Using the 3-Way Panhead
The 3-way fluid panhead allows for precise adjustments in three directions: pan (horizontal), tilt (vertical), and portrait/landscape orientation.
- Ajust de panoràmica: Loosen the pan lock knob (usually at the base of the panhead) to rotate the camera horizontally. Tighten to secure.
- Ajust d'inclinació: Loosen the tilt lock knob (often on the side of the panhead) to adjust the camera's vertical angle. Tighten to secure.
- Portrait/Landscape Adjustment: A separate knob or lever allows for tilting the camera 90 degrees for portrait orientation. Loosen, adjust, and tighten.
- Pan Handle: Use the pan handle for smooth and controlled movements during video recording or precise framing.
Manteniment
- Neteja: Netegeu el trípode amb un drap suau i sec després de cada ús per eliminar la pols i la brutícia. Per a la brutícia persistent, utilitzeu un drap lleugerament sec.amp cloth and then dry thoroughly. Avoid harsh chemicals.
- Emmagatzematge: Guardeu el trípode a la seva funda de transport en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Lubricació: Moving parts, such as leg locks and panhead mechanisms, generally do not require lubrication. If movement becomes stiff, consult a professional or the manufacturer's support.
- Inspecció: Reviseu periòdicament tots els cargols, poms i bloquejos de les potes per assegurar-vos que estiguin ben ajustats i que funcionin correctament. No els estrenyeu massa.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El trípode és inestable. | Leg locks not fully secured; uneven surface; weight limit exceeded. | Ensure all leg locks are firmly closed. Adjust leg lengths to level the tripod using the bubble level. Verify camera/camcorder weight does not exceed 5 pounds. |
| Càmera no ben fixada. | Quick-release plate not tightened to camera; quick-release plate not locked into panhead. | Ensure the quick-release plate is tightly screwed onto your device. Confirm the quick-release plate is fully inserted and locked into the panhead mechanism. |
| Panhead movement is stiff or loose. | Locking knobs are too tight or too loose; dirt in mechanism. | Adjust the pan and tilt locking knobs to the desired tension. Clean the panhead area. If issues persist, contact support. |
Especificacions
| Número de model | TGT-BK58T |
| Marca | Targus |
| Altura màxima | 58 polzades (147.3 cm) |
| Alçada plegada | 23 polzades (58.4 cm) |
| Pes de l'article | 2.5 lliures (1.13 kg) |
| Límit de pes | 5 lliures (2.27 kg) |
| Tipus de capçal | 3-Way Fluid Panhead |
| Material | Alumini |
| Dispositius compatibles | Càmera de vídeo, càmera |
| Característiques especials | Adjustable, Quick-Release Plate, Quick-Release Leg Locks, Dual Bubble Level |
Garantia i Suport
For warranty information or technical support, please refer to the warranty card included with your product or visit the official Targus weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Nota: Els termes i condicions de la garantia poden variar segons la regió.
