Manual d'usuari del projector DLP portàtil InFocus IN116

1. Introducció

This manual provides essential information for the safe and efficient operation of your InFocus IN116 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

Contingut del paquet

Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet:

• InFocus IN116 Projector
• Cable d'alimentació
• Cable RGB
• Cable A/V
• Instruccions de seguretat
• Manual d'usuari (aquest document)
• Comandament a distància
• Cable HDMI

2. Producte acabatview

The InFocus IN116 is a portable DLP projector designed for various applications, offering a native WXGA (1280 x 800) resolution, 2700 ANSI lumens brightness, and a 3000:1 contrast ratio. It features 3D-ready capabilities and multiple input options for flexible connectivity.

Característiques clau

• WXGA (1280 x 800) Native Resolution
• 2700 ANSI Lumens (2200 lumens in Eco Mode)
• Relació de contrast: 3000: 1
• 3D-Ready functionality
• Connectivitat HDMI
• Llarga duradaamp per a un ús prolongat
• Easy maintenance with no filters to replace

Components del projector

Imatge 1: Part superior View. This image displays the top of the InFocus IN116 projector, highlighting the control panel with buttons for power, menu, source selection, and navigation. The lens is visible at the front.

Imatge 2: Lateral View. This image shows the side of the InFocus IN116 projector, featuring prominent ventilation grilles for heat dissipation.

Imatge 3: Frontal View. This image presents the front of the InFocus IN116 projector, with the lens actively emitting light, indicating its operational state.

Imatge 4: posterior View (Connectivity Panel). This image details the rear panel of the InFocus IN116 projector, displaying various input and output ports including HDMI, VGA (Computer In 1 & 2, Computer Out), S-Video, Composite Video, Audio In/Out, RS232C, and Mini USB.

3. Instruccions de configuració

Col·locació

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the unit to prevent overheating. The projector can be placed on a table, ceiling-mounted, or used for rear projection.

Connexió a una font d'alimentació

1. Connecteu el cable d'alimentació a l'entrada de corrent del projector.
2. Connecteu l'altre extrem del cable d'alimentació a una presa de corrent amb connexió a terra.

Connecting Video Sources

The IN116 projector offers multiple input options:

• HDMI: For digital video and audio. Connect an HDMI cable from your source device to the projector's HDMI port.
• VGA (Computer In 1 & 2): For analog computer signals. Use a VGA cable to connect your computer to either VGA input.
• Vídeo compost: For standard definition video. Connect a composite video cable (yellow RCA) to the projector's Video input.
• Vídeo S: For enhanced standard definition video. Connect an S-Video cable to the projector's S-Video port.

For audio, connect an audio cable from your source to the projector's Audio In (3.5mm stereo) port if using VGA, Composite, or S-Video. HDMI carries both video and audio.

4. Instruccions de funcionament

Encès/Apagat

1. Per encendre, premeu el botó Poder button on the projector's control panel or the remote control. The power indicator light will illuminate.
2. Per apagar, premeu el botó Poder button twice. The projector will enter a cooling cycle before shutting down completely.

Selecció d'una font d'entrada

Premeu el botó Font button on the projector or remote control to cycle through available input sources (HDMI, VGA1, VGA2, Video, S-Video). The projector will automatically detect an active signal.

Ajust de la imatge

• Focus: Gireu l'anell d'enfocament de la lent del projector fins que la imatge sigui nítida i clara.
• Zoom: Ajusteu l'anell de zoom de la lent del projector per canviar la mida de la imatge.
• Correcció Keystone: If the image appears trapezoidal, use the keystone correction function (usually found in the OSD menu or via dedicated buttons on the remote) to square the image.
• Modes d'imatge: The projector offers various picture modes (e.g., Presentation, Bright, Movie, Eco Mode). Access these through the OSD menu to optimize image quality for different environments.

Mode Eco

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is ideal for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode, compared to 5,000 hours in normal mode.

Funcionalitat 3D

The InFocus IN116 is 3D-ready and supports 3D content from compatible sources, including Blu-ray players. To view 3D content, you will need compatible 3D glasses and a 3D-enabled source device. Refer to your 3D source device's manual for specific setup instructions.

5. Manteniment

Lamp Substitució

El projector lamp té una vida útil limitada. Quan el lamp Si s'il·lumina el llum indicador o la brillantor de la imatge disminueix significativament, és hora de substituir la lamp. El joamp door is conveniently located on top of the projector for easy access, even when ceiling-mounted.

1. Power off the projector and disconnect the power cord.
2. Allow the projector to cool down completely (at least 30 minutes).
3. Locate and open the lamp door on the top of the projector.
4. Traieu amb cura l'antiga lamp mòdul.
5. Instal·leu el nou lamp mòdul, assegurant-vos que estigui ben col·locat.
6. Tanca la lamp door and reconnect the power cord.
7. Restableix la lamp temporitzador al menú OSD del projector.

Precaució: Projector lamps operate at high temperatures and pressures. Handle with care. In rare cases, lamps can explode. Always wear protective eyewear when replacing a lamp.

Neteja

• Exterior: Utilitzeu un suau, damp cloth to clean the projector's exterior. Do not use abrasive cleaners or solvents.
• Lent: Use a lens cleaning cloth and lens cleaning solution specifically designed for optical surfaces. Avoid touching the lens with your fingers.
• Filtres: The InFocus IN116 projector is designed to operate without user-replaceable filters, simplifying maintenance.

6. Solució De Problemes

7. Especificacions

8. Garantia i Suport

Garantia limitada

All new DLP projectors from InFocus, including the IN116, are backed by a comprehensive limited warranty:

• Projector: Garantia limitada d'5 any
• Peces i mà d'obra: 2 any de garantia completa
• Lamp: 6 mesos de garantia

For detailed terms and conditions of the warranty, please refer to the official InFocus weblloc o contacteu amb el servei d'atenció al client.

Atenció al client

For technical assistance, troubleshooting, or warranty claims, please contact InFocus customer support. Visit the official InFocus weblloc web per obtenir informació de contacte i recursos addicionals.

Oficial Weblloc: www.infocus.com