Introducció
This manual provides essential information for the installation and maintenance of your genuine Frigidaire 316075103 Oven Bake Element. This component is designed to restore optimal baking function to compatible electric ranges and stoves. Please read all instructions carefully before proceeding with installation.
Informació important de seguretat
- Desconnecteu l'alimentació: Always ensure the appliance's power supply is completely disconnected at the circuit breaker before attempting any installation or repair. Failure to do so can result in serious injury or electrical shock.
- Utilitzeu equip de protecció: Wear appropriate personal protective equipment, including safety glasses and gloves, during installation to prevent injury.
- Assistència professional: If you are unsure about any step of the installation process, consult a qualified appliance technician.
- Recanvis originals: Use only genuine Frigidaire replacement parts to ensure proper fit, function, and safety.
Compatibilitat
The Frigidaire 316075103 Oven Bake Element is compatible with a wide range of Frigidaire, Electrolux, Tappan, White-Westinghouse, Kelvinator, and Gibson electric oven models. It is crucial to verify compatibility with your specific appliance model before purchasing i instal·lant aquesta peça.

Descripció de la imatge: A graphic titled "Is Your Part Compatible?" displaying a partial list of Frigidaire oven models compatible with the 316075103 bake element. The text advises checking the Frigidaire weblloc per a una completaview.
Refer to your appliance's user manual or the manufacturer's website for a comprehensive list of compatible models. The model number of your appliance is typically located on a label inside the oven door frame or on the back of the appliance.
Instruccions d'instal·lació
This installation is recommended for experienced DIYers. The estimated installation time is approximately 15 minutes.
Eines necessàries:
- Desenrotllador de femelles de 1/4"
- Tornavís de cap pla
- Guants
- Ulleres de seguretat
Guia pas a pas:
- Preparar el forn: Ensure the oven is cool. Disconnect the oven from its power source by unplugging it or turning off the circuit breaker.
- Accedir a l'element: Open the oven door. Locate the existing bake element at the bottom of the oven cavity.
- Elimina l'element antic:
- Using a 1/4" nut driver, remove the screws securing the bake element to the back wall of the oven.
- Carefully pull the element forward a few inches to expose the electrical terminals.
- Disconnect the wires from the terminals of the old element. It may be helpful to take a picture before disconnecting to ensure correct re-connection.
- Gently pull the old element completely out of the oven cavity.
- Instal·la un element nou:
- Carefully insert the new Frigidaire 316075103 bake element into the oven cavity, guiding the terminals through the holes in the back wall.
- Connect the electrical wires to the terminals of the new element. Ensure a secure connection.
- Push the element fully into place, aligning the mounting brackets with the screw holes.
- Secure the new element with the screws removed in step 3.
- Test the Oven: Close the oven door. Reconnect the oven to its power source. Turn on the oven to a bake setting to ensure the new element heats up properly.

Descripció de la imatge: The Frigidaire 316075103 Oven Bake Element, a black, U-shaped heating element with two electrical terminals at its ends, ready for installation.

Descripció de la imatge: The Frigidaire 316075103 Oven Bake Element displayed alongside a modern electric range, illustrating its intended use as a replacement part.
Manteniment
To prolong the life of your oven bake element and ensure efficient operation:
- Mantenir net: Regularly clean the oven interior, avoiding excessive spills directly onto the element.
- Evitar l'impacte: Be careful not to strike the element with cookware or cleaning tools, as this can cause damage.
- Inspeccionar periòdicament: Periodically inspect the element for any signs of damage, such as cracks, blisters, or uneven heating.
Resolució de problemes
If your oven is not heating properly after replacing the bake element, consider the following:
- Sense calor:
- Verify the oven is plugged in and the circuit breaker is on.
- Check that the electrical wires are securely connected to the element terminals.
- Ensure the element is properly seated and secured in its mounting brackets.
- Escalfament desigual:
- Confirm the element is fully functional and glowing evenly when heated.
- Ensure no debris or food particles are obstructing the element's heat distribution.
- Element Not Glowing:
- If the element does not glow red when the oven is set to bake, it may indicate a faulty connection or a problem with the oven's control board.
Si els passos de resolució de problemes no resolen el problema, es recomana contactar amb un tècnic de reparació d'electrodomèstics qualificat.
Especificacions del producte
| Número de model | 316075103 |
| Marca | Frigidaire |
| Dimensions del producte | 19.25 x 18.75 x 1.5 polzades |
| Pes de l'article | 12.8 unces |
| Font d'alimentació | Elèctric amb cable |
| Tipus de combustible | Elèctric |
| Material de la superfície de l'escalfador | Ceràmica |
| Color | Negre |
Garantia i Suport
As a genuine Frigidaire part, this bake element is engineered to exact specifications for optimal performance. For warranty information or technical support, please refer to your original appliance documentation or contact Frigidaire customer service directly. Using genuine parts ensures compatibility and maintains the integrity of your appliance's warranty.





