1. Producte acabatview
The Rugged Ridge XHD Modular Full-Width Rear Bumper is designed to provide robust protection and a customizable aesthetic for your Jeep. Constructed from heavy-duty 4mm thick steel with a textured black powder-coated finish and a tough E-Coat under-coating, this bumper is built for durability and longevity. Its modular design allows for various configurations, adapting to individual preferences and functional requirements. This rear bumper includes D-rings for recovery applications.
2. Informació de seguretat
ADVERTIMENT: This product and/or related accessories can expose you to chemicals and/or components which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Always wear appropriate personal protective equipment (PPE) during installation, including safety glasses and gloves. Ensure the vehicle is securely supported before beginning any work. Refer to your vehicle's service manual for specific instructions regarding bumper removal and installation procedures.
3. Guia d'instal·lació
This section provides general guidelines for installing the Rugged Ridge XHD Rear Bumper. Specific steps may vary based on your vehicle's model year and existing modifications. Professional installation is recommended if you are unfamiliar with automotive modifications.
3.1 Eines necessàries (no incloses)
- Conjunt de claus d'endoll
- Conjunt de claus obertes
- Clau dinamométrica
- Ulleres de seguretat
- Guants
- Jack and Jack Stands (or vehicle lift)
3.2 Passos previs a la instal·lació
- Aparqueu el vehicle en una superfície plana i activeu el fre d'estacionament.
- Desconnecteu el terminal negatiu de la bateria del vehicle.
- Safely lift the rear of the vehicle using a jack and secure it with jack stands.
- Remove the existing rear bumper according to your vehicle's manufacturer specifications. This typically involves removing mounting bolts and disconnecting any wiring for lights or sensors.
3.3 Bumper Installation
- Carefully position the Rugged Ridge XHD Rear Bumper onto the vehicle's frame mounting points. It may be helpful to have assistance due to the bumper's weight.
- Insert the provided mounting hardware (bolts, washers, nuts) through the bumper and frame. Do not fully tighten any bolts at this stage. Leave all bolts loose to allow for adjustment.
- Align the bumper to ensure it is centered and level on the vehicle. Adjust as necessary.
- Once properly aligned, progressively tighten all mounting bolts to the manufacturer's recommended torque specifications. Refer to your vehicle's service manual for frame bolt torque values.
- If applicable, re-connect any wiring for lights or sensors.
- Lower the vehicle safely from the jack stands.
- Torneu a connectar el terminal negatiu de la bateria.
4. Ús i funcionalitat
The Rugged Ridge XHD Rear Bumper serves multiple functions:
- Protecció del vehicle: Provides enhanced rear-end protection against impacts during off-road driving or minor collisions.
- Recovery Points: The integrated D-rings offer secure attachment points for recovery straps and winches, essential for off-road situations. Ensure D-rings are properly secured before use.
- Disseny modular: The XHD series allows for future customization with compatible Rugged Ridge accessories, such as tire carriers (sold separately), to expand functionality.
5. Cura i Manteniment
To ensure the longevity and appearance of your Rugged Ridge XHD Rear Bumper, follow these maintenance guidelines:
- Neteja regular: Wash the bumper regularly with mild automotive soap and water to remove dirt, mud, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the powder-coated finish.
- Inspeccionar per danys: Periodically inspect the bumper for any signs of damage, such as scratches, chips in the coating, or structural deformation. Address any damage promptly to prevent rust or further deterioration.
- Comprovació dels elements de fixació: Regularly check all mounting bolts and hardware to ensure they remain tight. Vibrations from driving, especially off-road, can cause fasteners to loosen over time.
- Pintura de retoc: If the powder coat is chipped or scratched, use a compatible touch-up paint to prevent rust and maintain the bumper's appearance.
6. Solució De Problemes
Si teniu problemes durant o després de la instal·lació, tingueu en compte el següent:
- Problemes d'ajust: If the bumper does not align correctly, ensure all existing mounting points on the vehicle frame are clear of debris or obstructions. Verify that all bolts were left loose during initial positioning to allow for maximum adjustment before final tightening. Some older vehicles may have slight frame variations that require careful alignment.
- Components solts: If any part of the bumper feels loose after installation, re-check the torque on all mounting hardware. Ensure all washers and nuts are correctly installed.
- Peces que falten: If any components are missing from the package, contact Rugged Ridge customer support immediately.
7. Especificacions
| Característica | Detall |
|---|---|
| Marca | Rugged Ridge |
| Número de model | 11546.10 |
| Posició de peces d'automòbil | posterior |
| Material | Acer d'aliatge |
| Color | Negre |
| Acabat exterior | Textured Black Metal (Powder Coated) |
| Dimensions del producte | 15 "P x 70" W x 11" H |
| Pes de l'article | 94 lliures |
| Encaixament | 1976-1986 Jeep CJ; 1987-2006 Jeep Wrangler YJ/TJ |
| Característiques | Modular design, D-rings included |
| UPC | 804314228293 |
8. Garantia i Suport
For information regarding product warranty, please refer to the official Rugged Ridge weblloc web o contacteu directament amb el seu departament d'atenció al client. Els termes i condicions de la garantia poden variar.
If you require technical assistance, have questions about installation, or need to report a defective product, please contact Rugged Ridge customer support through their official channels.
