Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Mount-It! Dual Monitor Mount, model MI-752. Please read these instructions carefully before assembly and use to ensure proper functionality and safety. This product is designed to securely hold two computer monitors, enhancing your workspace ergonomics.
Image: The Mount-It! Dual Monitor Mount MI-752, featuring its black finish, central pole, adjustable arms, and desk clamp mecanisme.
Informació de seguretat
- Assegureu-vos que tots els components siguin presents i no estiguin danyats abans del muntatge. No utilitzeu el producte si hi falta alguna peça o si està defectuosa.
- Verify that your desk surface is strong enough to support the combined weight of the mount and two monitors.
- Do not exceed the maximum weight capacity of 22 pounds (10 kg) per monitor arm.
- Ensure monitors are VESA compatible (75x75mm or 100x100mm) before attempting to attach them.
- Mantingueu els nens i les mascotes allunyats durant la instal·lació.
- Estrenyeu tots els cargols fermament, però no els estrenyeu massa per evitar que es pelin les rosques.
Contingut del paquet
Si us plau, comproveu que tots els components següents estiguin inclosos al paquet:
- Central Pole with Desk Clamp/Grommet Base
- Two Monitor Arms
- VESA Mounting Plates (pre-attached to arms)
- Hardware Kit (screws, washers, spacers for monitor attachment)
- Eines (claus Allen)
- Clips de gestió de cables
Configuració i instal·lació
Follow these steps to correctly install your dual monitor mount.
Pas 1: Trieu el mètode de muntatge
The MI-752 supports two installation methods: C-Clamp or Grommet Base. Select the method suitable for your desk.
C-Clamp Instal·lació
- Enganxeu el C-clamp assembly to the bottom of the central pole.
- Position the mount on the edge of your desk. Ensure the desk thickness is between 0.4 inches (1 cm) and 4 inches (10 cm).
- Apretar el C-clamp screws until the mount is securely fastened to the desk. Do not overtighten.
Image: Detail of the C-clamp mechanism securing the mount to a desktop, illustrating maximum compatible desk thickness.
Instal·lació de la base de l'eix
- Si el vostre escriptori té un forat per a ulleres, desmunteu el C-cl.amp and attach the grommet base plate to the central pole.
- Insert the central pole through the grommet hole.
- Fixeu la base del grommet des de sota l'escriptori amb els accessoris proporcionats.
Step 2: Attach Monitor Arms
Slide the monitor arms onto the central pole at your desired height. Use the included Allen wrench to tighten the set screw on each arm to secure its position.
Pas 3: connecteu els monitors
- Carefully attach the VESA mounting plates (pre-attached to the arms) to the back of your monitors using the appropriate screws from the hardware kit. Ensure the VESA pattern (75x75mm or 100x100mm) matches your monitor.
- Once the VESA plates are secured to the monitors, slide the monitors onto the arms.
- Tighten any remaining screws to ensure the monitors are firmly attached to the arms.
Image: Visual guide for VESA mounting patterns and weight capacity per arm.
Instruccions d'ús i ajustos
The Mount-It! MI-752 offers various adjustment options for optimal viewcomoditat.
Ajust d'alçada
To adjust the height of the monitors, loosen the set screw on the monitor arms where they attach to the central pole. Slide the arms up or down to the desired height, then re-tighten the set screw firmly.
Tilt, Swivel, and Rotation
The monitor arms allow for flexible positioning:
- Inclinació: Monitors can tilt up or down by 15 degrees. Adjust the tilt mechanism on the VESA plate.
- Girar: The arms can swivel 360 degrees left and right.
- Rotació: Monitors can rotate 180 degrees for landscape or portrait orientation without removal.
Image: Visual representation of the tilt, swivel, and rotation capabilities of the monitor arms.
Gestió de cables
Integrated cable management clips are located on each arm and along the central pole. Route your monitor and power cables through these clips to maintain a tidy and organized workspace.
Imatge: Example of cable routing using the integrated cable management system.
Manteniment
To ensure the longevity and safe operation of your monitor mount:
- Reviseu periòdicament tots els cargols i connexions per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
- Netegeu la muntura amb un drap suauamp drap. Eviteu productes de neteja o dissolvents abrasius.
- Do not apply excessive force when adjusting the arms or monitors.
Resolució de problemes
Monitors are not level or sag
- Ensure all VESA plate screws are securely tightened to the monitor and the arm.
- Check the tightness of the pivot points on the monitor arms. Adjust with the provided Allen wrench if needed.
- Verify that the desk surface itself is level. Minor desk imperfections can be amplified by the mount.
La muntura sembla inestable
- Re-check the C-clamp or grommet base installation. Ensure it is firmly secured to the desk and the desk thickness is within the specified range.
- Confirm that the combined weight of your monitors does not exceed the mount's capacity.
Dificultat per ajustar la posició del monitor
- Ensure no cables are snagged or obstructing movement.
- Check the tension of the joints. Some joints may have adjustable tension screws that can be loosened slightly with an Allen wrench if movement is too stiff.
Especificacions
| Número de model | MI-752 |
| Material | Acer d'aliatge, alumini |
| Tipus de muntatge | Tabletop Mount (C-Clamp or Grommet Base) |
| Mides de monitor compatibles | 13 - 27 polzades |
| Capacitat de pes per braç | 22 lliures (10 kg) |
| Compatibilitat VESA | 75x75mm, 100x100mm |
| Tipus de moviment | Articulating, Rotate, Swivel, Tilt |
| Angle d'inclinació màxim | 15 graus |
| Gruix màxim de l'escriptori | 4 polzades (10 cm) |
| Dimensions del producte | 24 x 5 x 11 polzades (aproximadament, muntat) |
| Pes de l'article | 13.2 lliures |
Image: Detailed dimensions of the monitor mount components.
Informació de la garantia
The Mount-It! Dual Monitor Mount MI-752 comes with a GARANTIA DE 5 ANYSAquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús normal. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.
Atenció al client
For any questions, assistance with installation, or troubleshooting, please contact our US-based customer support team. Our friendly and responsive team is available during normal business hours to provide support.
Please refer to the Mount-It! weblloc web o la documentació de compra per obtenir dades de contacte específiques.
