Instruction Manual: Grasslin by Intermatic GM40AV 24-Hour Electromechanical Timer

Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Grasslin by Intermatic GM40AV 24-Hour Electromechanical Timer. Please read this manual thoroughly before installation and use to ensure safe and efficient operation of the device. This timer is designed for reliable control of electrical loads in various applications.

Informació important de seguretat

ADVERTÈNCIA: Risc d'incendi o descàrrega elèctrica.

• Disconnect power at the circuit breaker or disconnect switch(es) before installing or servicing.
• Do not use the manual shut-off position of the timer for equipment servicing.
• La instal·lació i/o el cablejat han de complir els requisits del codi elèctric nacional i local.
• For 40 A loads, use #8 AWG wire rated 90°C (194°F) copper conductors ONLY.
• This enclosure does not provide grounding between conduit connections. When metallic conduit is used, you must also install grounding type bushings and jumper wires.
• Per a llocs exteriors o llocs humits (estanquitats a la pluja), s'han d'utilitzar concentradors de conductes que compleixin els requisits de l'estàndard UL514B per a la instal·lació de caixes de conductes i de sortida.
• Rotate timer dial clockwise only. Moving the clock hands counter-clockwise can damage the timer.

Producte acabatview

The Intermatic GM40AV is a 24-hour electromechanical timer housed in a durable NEMA 3R outdoor plastic enclosure, designed for robust performance in various environments. It features a clear dial for setting schedules and indicators for power and status.

Figure 1: The GM40AV timer in its closed NEMA 3R outdoor plastic enclosure, providing protection from environmental elements.

Figure 2: The timer with its enclosure door open, revealing the 24-hour dial, power (yellow) and status (green) indicator lights, and important safety labels.

Figura 3: Detall view of the timer's 24-hour dial, showing the minute hand, hour markings, and the small white trippers used for setting ON/OFF intervals.

Figure 4: The physical dimensions of the timer enclosure, demonstrating its compact size for installation.

Especificacions

Configuració i instal·lació

Installation of the GM40AV timer should only be performed by qualified personnel in accordance with all national and local electrical codes. Ensure power is disconnected at the main panel before beginning any work.

1. Muntatge: Securely mount the NEMA 3R outdoor plastic enclosure to a flat, stable surface using appropriate screw-in methods. The enclosure is designed for surface mounting.
2. Cablejat: Open the enclosure door. Refer to the wiring diagrams located inside the enclosure for correct connections. The GM40AV supports SPDT/DPDT configurations. Ensure all wire connections are tight and secure. For 40A loads, use #8 AWG 90°C copper conductors. If using metallic conduit, install grounding type bushings and jumper wires as the enclosure does not provide grounding between conduit connections.
3. Connexions de conductes: For outdoor or wet locations, use conduit hubs that comply with UL514B standards to maintain the rain-tight integrity of the enclosure.
4. Insulating Panel: After wiring is complete, ensure the insulating panel is properly replaced before closing the enclosure door.
5. Restauració d'energia: Un cop finalitzada la instal·lació i verificades totes les connexions, restableu l'alimentació a l'interruptor principal.

Instruccions de funcionament

The GM40AV timer is designed for straightforward operation to control your electrical loads.

1. Configuració de l'hora: Turn the minute hand clockwise until the time of day (AM or PM) on the outer dial is aligned with the triangle marker on the inner dial. Do not rotate the dial counter-clockwise as this can damage the timer mechanism.
2. Programació dels cicles ON/OFF: The outer dial features 1/4 hour divisions and AM/PM indicators. To program an ON period, push the white captive trippers outward for the desired duration. Each tripper represents 15 minutes. For example, to set a 1-hour ON period, push out four consecutive trippers.
3. Anulació manual: The timer includes a manual override switch.
   • Posició mitjana: The timer operates in automatic mode, following the programmed ON/OFF cycles.
   • Upper Position (ON): The output is permanently ON, overriding the program.
   • Lower Position (OFF): The output is permanently OFF, overriding the program.

Manteniment

The Intermatic GM40AV timer is designed for minimal maintenance. Regular checks can help ensure its longevity and proper function.

• Inspecció periòdica: Annually inspect the enclosure for any signs of damage, cracks, or loose connections. Ensure the door latches securely.
• Neteja: Netegeu l'exterior de la carcassa amb anuncisamp cloth. Do not use abrasive cleaners or solvents. Ensure the timer is dry before closing the door.
• Integritat del cablejat: Periodically check wiring connections for tightness, especially if the unit is subject to vibration or extreme temperature changes. Always disconnect power before inspecting wiring.

Resolució de problemes

If you encounter issues with your GM40AV timer, refer to the following common problems and solutions:

Garantia i Suport

For detailed warranty information regarding your Intermatic GM40AV timer, please refer to the manufacturer's official documentation or visit the Botiga Intermatic a Amazon o el seu oficial website. Intermatic provides support for their products to ensure customer satisfaction.

For technical assistance or further inquiries, please contact Intermatic customer support directly.