Introducció
This manual provides instructions for the Dish Network 4.4 IR/UHF Pro Remote, model 176539. This remote is designed to operate Dish Network receivers, including the model 322, and can also be programmed to control up to three additional devices such as televisions, DVD players, VCRs, or sound systems. It supports both Infrared (IR) and Ultra High Frequency (UHF) communication modes.
This image displays the Dish Network 4.4 IR/UHF Pro Remote 322. The remote is black with various control buttons. Key features visible include the power button (orange), volume and channel controls (purple), a directional pad (purple), and number buttons (grey). The Dish Network logo is visible at the bottom right, along with a '2' indicating its function for a second TV.
Configuració
1. Instal·lació de la bateria
The remote requires four (4) AAA batteries. To install:
- Localitza la tapa del compartiment de les piles a la part posterior del comandament a distància.
- Feu lliscar la coberta.
- Insert four AAA batteries, ensuring correct polarity (+ and -).
- Substituïu la tapa del compartiment de la bateria.
2. Programming for Dish Network Receiver
This remote can operate in either IR (Infrared) or UHF (Ultra High Frequency) mode. The mode is typically selected via a switch or tab within the battery compartment or on the remote itself. For model 322 receivers, the remote can function as a primary remote (TV1) or a secondary remote (TV2) using either IR or UHF.
- Mode IR: Line-of-sight is required between the remote and the receiver.
- UHF Mode: Allows control without direct line-of-sight, useful for controlling receivers in another room or cabinet. The remote ships with a small UHF key for TV1.
Refer to your Dish Network receiver's manual for specific pairing instructions, as procedures may vary slightly by receiver model. Generally, this involves accessing a menu on your receiver to pair the remote.
3. Programming for Additional Devices (TV, DVD, VCR, Sound System)
The remote can be programmed to control up to four devices. To program for other devices:
- Engegueu el dispositiu que voleu programar (per exemple, televisor, reproductor de DVD).
- Premeu i manteniu premut el botó del dispositiu desitjat (per exemple, TV, DVD) on the remote until all device buttons light up, then release. The selected device button should remain lit.
- Enter the 3-digit programming code for your device's brand. A list of common codes is usually provided with the remote or can be found on the Dish Network support weblloc.
- Point the remote at the device and press the PODER button. If the device turns off, the code is correct.
- If the device does not turn off, repeat steps 2-4 with the next code for your brand.
- Once programmed, press the selected device button again to save the setting.
Funcionament del comandament a distància
The Dish Network 4.4 remote features a variety of buttons for controlling your entertainment system. Below are descriptions of common button functions:
- POTÈNCIA: Encén o apaga el dispositiu seleccionat.
- TV/VÍDEO: Switches video input on your television.
- MUT: Silencia l'àudio.
- VOLUM +/-: Ajusta el volum d'àudio.
- CHANNEL +/-: Canvia el canal.
- GUIA: Mostra la guia del programa.
- INFORMACIÓ: Mostra informació sobre el programa actual.
- RECORDA: Torna al canal anterior.
- SYS INFO: Accesses system information.
- DIRECTIONAL PAD (Arrows & SELECT): Navega pels menús i selecciona opcions.
- CANCEL · LAR: Exits menus or cancels actions.
- VIEW TV: Canvia a televisió en directe.
- REGISTRE: Inicia l'enregistrament del programa actual.
- DVR Controls (PLAY, PAUSE, STOP, FWD, REW, SKIP): Controls playback of recorded content.
- BOTONS NÚMEROS (0-9): Introdueix directament números de canal o seleccions de menú.
- CERCAR: Accesses search functions.
- FORMAT: Changes video format or aspect ratio.
Manteniment
Canvi de bateria
Replace batteries when the remote's response becomes sluggish or the indicator light fails to illuminate. Always replace all four AAA batteries simultaneously with new ones. Do not mix old and new batteries or different battery types.
Neteja
To clean the remote, use a soft, dry cloth. For stubborn dirt, lightly dampRenta el drap amb aigua. Evita utilitzar productes químics agressius, netejadors abrasius o humitat excessiva, ja que poden danyar els components electrònics o l'acabat del comandament a distància.
Resolució de problemes
- El comandament a distància no respon:
- Comproveu la instal·lació de les piles i assegureu-vos que les piles siguin noves.
- Ensure there are no obstructions between the remote and the receiver/device if using IR mode.
- Verify the remote is set to the correct device mode (e.g., Ds for the receiver, TV for the television).
- Botons específics que no funcionen:
- This may indicate a worn-out button or internal issue. Try replacing batteries first.
- If the remote is programmed for multiple devices, ensure the correct device button is selected for the function you are attempting.
- Programming issues for other devices:
- Double-check the programming codes for your device brand.
- Ensure the device is on and the remote is pointed directly at it during programming.
- Some older or newer devices may not be compatible with the remote's pre-programmed codes.
- UHF mode not working:
- Ensure the remote's UHF switch/tab is correctly set.
- Verify the receiver is configured for UHF remote control and is properly paired.
Especificacions
- Número de model: 176539
- Dimensions del producte: 8 x 1 x 3 polzades
- Pes de l'article: 3.52 unces
- Bateries: Necessites 4 piles AAA
- Nombre màxim de dispositius admesos: 4
- Dispositius compatibles: Dish Network Satellite Receivers (e.g., Model 322), TV, DVD, VCR, Sound Systems
- Tipus de comunicació: IR (Infrared) and UHF (Ultra High Frequency)
- Color: Negre
Garantia i Suport
For specific warranty information or technical support, please contact Dish Network directly. Their official website or customer service channels can provide the most accurate and up-to-date assistance regarding your remote control and receiver.
