Monacor SPH-5M

Monacor SPH-5M Hi-Fi Bass-Midrange Speaker

Manual d'instruccions

1. Introducció

The Monacor SPH-5M is a high-quality Hi-Fi bass-midrange speaker designed for exceptional audio reproduction. It features a robust construction and advanced acoustic properties, making it suitable for various speaker system designs.

Característiques principals:

  • High-quality bass-midrange speaker designed for long excursion.
  • Damped, low-resonance polypropylene cone for clear sound.
  • Robust die-cast aluminum basket with an attractive design and 6-hole screw connection.
  • Magnetic system with a drilled pole core and extended rear plate for optimized performance.
  • Versatile for compact bass-reflex, TML, and closed speaker systems.
  • Also suitable as a midrange speaker in 3-way speaker systems.
Monacor SPH-5M Hi-Fi Bass-Midrange Speaker, front view
Figura 1: Monacor SPH-5M Hi-Fi Bass-Midrange Speaker. This image shows the speaker's black polypropylene cone, the surrounding rubber surround, and the sturdy die-cast aluminum frame with mounting holes. The rear terminals are also visible.

2. Configuració i instal·lació

Proper installation is crucial for optimal performance and longevity of your SPH-5M speaker. Follow these guidelines:

  1. Disseny de tancament: The SPH-5M is designed for compact bass-reflex, TML (Transmission Line), and closed speaker enclosures. Ensure your enclosure design is appropriate for the speaker's parameters to achieve desired acoustic results.
  2. Muntatge: Secure the speaker firmly into the enclosure using the 6-hole screw connection points on the robust die-cast aluminum basket. Use appropriate screws that do not overtighten or damage the basket.
  3. Cablejat: Connect the speaker terminals to your amplifier or crossover network. Ensure correct polarity (+ to + and - to -) to avoid phase issues that can degrade sound quality. The speaker has an impedance of 8 Ohms.
  4. AmpCoincidència de lifier: Utilitzeu un amplifier capable of delivering sufficient power (up to 40 WRMS continuous, 80 WMAX peak) into an 8 Ohm load. Avoid underpowering or overpowering the speaker, as both can lead to damage.

3. Funcionament

To ensure the best performance and extend the life of your Monacor SPH-5M speaker, observe the following operational guidelines:

  • Intrusió inicial: Allow a break-in period of several hours of moderate listening before operating the speaker at high volumes. This allows the cone and surround materials to loosen and perform optimally.
  • Nivells de volum: Operate the speaker within its specified power handling limits (40 WRMS / 80 WMAX). Avoid prolonged listening at excessively high volumes that cause audible distortion, as this can damage the voice coil.
  • Configuració de crossover: If using a crossover, ensure it is correctly configured for the SPH-5M's frequency response characteristics to prevent sending inappropriate frequencies to the driver.

4. Manteniment

The Monacor SPH-5M speaker requires minimal maintenance to ensure long-term performance:

  • Neteja: Gently wipe the cone and frame with a soft, dry cloth to remove dust. Avoid using harsh chemicals or excessive moisture.
  • Condicions ambientals: Keep the speaker in a stable environment, away from direct sunlight, extreme temperatures, and high humidity.
  • Inspecció: Periodically inspect the cone, surround, and dust cap for any signs of damage or wear.

5. Solució De Problemes

If you encounter issues with your SPH-5M speaker, consider the following common troubleshooting steps:

  • Sense so:
    • Comproveu totes les connexions de cablejat des del amplifier to the speaker for secure contact and correct polarity.
    • Comproveu que el ampel lifier està encès i funciona correctament.
    • Ensure the audio source is active and sending a signal.
  • So distorsionat:
    • Reduce the volume level; distortion often occurs when the amplifier or speaker is overdriven.
    • Comproveu si hi ha connexions soltes o cables d'altaveu danyats.
    • Inspeccioneu el con de l'altaveu i el so envoltant per detectar qualsevol dany físic.
    • Assegureu-vos el amplifier is not clipping (producing a distorted waveform).
  • Weak Bass or Midrange:
    • Confirm correct speaker polarity; reversed polarity can cause bass cancellation.
    • Check crossover settings to ensure appropriate frequencies are being sent to the speaker.
    • Verify the enclosure is sealed properly (for closed designs) or that ports are unobstructed (for bass-reflex designs).

If problems persist after performing these checks, contact a qualified audio technician or Monacor customer support for further assistance.

6. Especificacions

CaracterísticaEspecificació
MarcaMonacor
Número de model10.5530
Manipulació d'energia (RMS)40 watts
Maneig de potència (màx.)80 watts
Impedància8 ohms
Tecnologia de connectivitatAuxiliar (amb cable)
Tipus de muntatgeTable Mount (typically within an enclosure)
Tipus d'altaveuWoofer / Bass-Midrange
Usos recomanatsFor television (as part of a home audio system)
Dimensions del producte (L x A x A)13 x 16 x 28 cm
Pes del producte190.51 grams
ImpermeableTrue (referring to cone material resistance)
Font d'alimentacióElectric Cable (via ampmés viu)

7. Garantia i Suport

For warranty information, technical support, or service inquiries regarding your Monacor SPH-5M speaker, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official Monacor weblloc web per obtenir dades de contacte i més recursos.

Documents relacionats - SPH-5M

Preview Atenuador estèreo MONACOR ATT-325ST: guia tècnica i d'instal·lació
Aquest document proporciona instruccions d'instal·lació, detalls d'aplicació, notes de seguretat i especificacions tècniques per a l'atenuador estèreo MONACOR ATT-325ST. Dissenyat per a sistemes d'àudio professionals, ofereix una potència de 25 W RMS per canal i compatibilitat amb una impedància de 4 Ω.
Preview Excitadors d'àudio MONACOR AR-30 i AR-50: instal·lació i especificacions
Aquesta guia proporciona instruccions detallades per instal·lar i utilitzar els excitadors d'àudio MONACOR AR-30 i AR-50. Aprèn sobre les seves característiques, especificacions tècniques i com transformar superfícies en altaveus per a una experiència d'àudio única.
Preview MONACOR SL-250 SW/EN & SL-250 WS/EN PA Speaker Installation and Usage Guide
Comprehensive guide for installing and using the MONACOR SL-250 SW/EN and SL-250 WS/EN PA speakers, covering applications, safety instructions, installation steps, and technical specifications. Certified for EN 54-24 voice alarm systems.
Preview Manual d'instal·lació i funcionament dels altaveus PA MONACOR SL-250 SW/EN i SL-250 WS/EN
Aquest manual proporciona instruccions detallades per a la instal·lació i el funcionament dels altaveus PA MONACOR SL-250 SW/EN i SL-250 WS/EN. Cobreix aplicacions, pautes d'ús importants, procediments d'instal·lació pas a pas i especificacions tècniques completes, garantint una implementació segura i eficaç en sistemes de PA i alarmes de veu.
Preview Altaveus de paret MONACOR WALL-T sèrie PA: guia d'instal·lació i especificacions tècniques
Detailed installation guide for MONACOR WALL-T series PA wall speakers (WALL-04T, WALL-05T, WALL-06T, WALL-08T). Covers applications, important notes, step-by-step installation, and technical data for 100V and 8Ω systems. Features weatherproof IP65 rating.
Preview MONACOR DMT-4010RMS Multímetre digital Bedienungsanleitung
Umfassende Bedienungsanleitung für das MONACOR DMT-4010RMS Digitalmultimeter. Enthält Anleitungen zu Betrieb, Sicherheit, Messungen und technischen Spezifikationen für präzise elektrische Messungen.