Tekmar 150 One Stage Setpoint Control

1. Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Tekmar 150 One Stage Setpoint Control. This device is designed to manage heating or cooling systems based on a single setpoint, ensuring efficient and reliable performance.

Please read this manual thoroughly before installation and use to ensure proper function, safety, and to prevent damage to the unit or associated equipment. Keep this manual for future reference.

2. Informació de seguretat

Adherence to the following safety guidelines is crucial for preventing personal injury and damage to the equipment:

• Desconnecteu l'alimentació: Always disconnect the main power supply before installing, servicing, or removing the control unit. Failure to do so may result in electrical shock or equipment damage.
• Personal qualificat: Installation and wiring must be performed by qualified, licensed personnel in accordance with all local and national electrical codes.
• Ús adequat: Use this product only for its intended purpose as described in this manual. Any other use may void the warranty and create a hazard.
• Condicions ambientals: Do not expose the control to water, excessive humidity, or extreme temperatures outside its specified operating range.
• Inspecció: Regularly inspect the unit for any signs of damage. Do not operate the control if it appears damaged.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• Tekmar 150 One Stage Setpoint Control Unit
• Maquinari de muntatge (cargols, ancoratges)
• Manual d'instruccions (aquest document)

4. Configuració i instal·lació

4.1 Ubicació de muntatge

Select a suitable indoor location for mounting the Tekmar 150 control. The location should be:

• Easily accessible for operation and maintenance.
• Free from direct sunlight, drafts, or heat sources that could affect its temperature sensing.
• Away from areas with high vibration or electromagnetic interference.

4.2 Muntatge de la unitat

1. Mark the desired mounting points on the wall using the control unit as a template.
2. Si cal, perforeu forats pilot i inseriu ancoratges de paret.
3. Secure the control unit to the wall using the provided mounting hardware. Ensure it is level and firmly attached.

4.3 Connexions de cablejat

WARNING: Ensure power is disconnected before proceeding with wiring.

Refer to the wiring diagram provided on the back of the control unit or in the separate wiring schematic (if applicable). Connect the power supply, sensor inputs, and controlled equipment outputs to the appropriate terminals. Ensure all connections are secure and comply with local electrical codes.

Use appropriate gauge wiring for all connections. Incorrect wiring can damage the unit or connected equipment.

Image showing the front view of the Tekmar 150 One Stage Setpoint Control unit, typically used for managing heating or cooling systems based on a single setpoint. The display and control buttons are visible.

5. Funcionament

5.1 Engegada inicial

After all wiring is complete and verified, restore power to the control unit. The unit will perform a brief self-test, and the display (if present) will illuminate. The default setpoint or current operating status will be shown.

5.2 Setting the Setpoint

The Tekmar 150 allows for easy adjustment of the desired setpoint. Use the designated adjustment dial or buttons (refer to the unit's front panel) to increase or decrease the setpoint value. The display will show the current setpoint as you adjust it.

• Botons amunt / avall: Press the 'Up' or 'Down' buttons to change the setpoint.
• Marca: Rotate the dial clockwise to increase the setpoint, counter-clockwise to decrease.

The control will automatically adjust its output to maintain the system at the setpoint.

5.3 Llums indicadors

The control unit may feature indicator lights to show its operational status:

• Potència (verd): Indica que la unitat està rebent alimentació.
• Output Active (Amber/Red): Indicates that the control is actively calling for heating or cooling.
• Error (Red/Flashing): Indicates a fault condition. Refer to the troubleshooting section.

6. Manteniment

The Tekmar 150 One Stage Setpoint Control is designed for reliable, long-term operation with minimal maintenance. However, periodic checks can help ensure optimal performance:

• Neteja: Periodically wipe the exterior of the unit with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
• Connexions: Annually, inspect all wiring connections to ensure they are secure and free from corrosion.
• Sense peces reparables per l'usuari: There are no user-serviceable parts inside the control unit. Do not attempt to open or repair the unit yourself. Refer all servicing to qualified personnel.

7. Solució De Problemes

If you experience issues with your Tekmar 150 control, consult the following table before contacting technical support:

If the problem persists after attempting these solutions, contact Tekmar technical support.

8. Especificacions

9. Garantia i Suport

Tekmar products are manufactured to high standards and are backed by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Tekmar weblloc.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Tekmar customer service. Have your product model number and purchase date available when contacting support.

Tekmar Customer Support:

• Contact information not provided in product data. Please refer to Tekmar's official website or product packaging for current support details.