Producte acabatview
The 3M Coban 2 Layer Compression System is designed for effective and comfortable compression therapy. This low-profile system consists of two distinct layers: an inner comfort layer and an outer compression layer. These layers are engineered to cohere together after application, providing consistent and therapeutic compression.
It is suitable for the management of venous leg ulcers and other clinical conditions where compression is indicated. The thin and lightweight design allows for greater patient comfort and the ability to wear normal footwear.
Imatge: The product packaging displays the two rolls of the Coban 2 Layer Compression System. Roll 1 is the comfort layer (lighter color), and Roll 2 is the compression layer (darker color). Diagrams on the box illustrate the application process on both an arm and a leg, showing the two layers being applied sequentially.
Instruccions d'aplicació
The Coban 2 Layer Compression System is designed for fast and easy application in two simple steps. Always ensure the skin is clean and dry before application. Consult a healthcare professional for proper technique and suitability for your condition.
- Step 1: Apply the Comfort Layer (Roll No. 1)
Begin by applying the inner comfort layer (Roll No. 1, typically lighter in color). This layer provides padding and helps distribute pressure evenly. Apply with light tension, ensuring full coverage of the affected area, typically from the base of the toes or foot up to just below the knee for leg applications, or covering the affected area on an arm.
- Step 2: Apply the Compression Layer (Roll No. 2)
Immediately after applying the comfort layer, apply the outer compression layer (Roll No. 2, typically darker in color) over the first layer. This layer provides the therapeutic compression. Apply with the recommended stretch, ensuring it adheres to the comfort layer. The two layers will cohere together, forming a cohesive and stable compression system.
Ensure the system is applied smoothly without wrinkles or excessive pressure points. The system is designed to be thin and lightweight once applied.
Pautes d'ús
The 3M Coban 2 Layer Compression System is intended for single-patient use and should not be reused. It is designed to provide comfortable, effective compression for an extended period, typically up to 7 days, as directed by a healthcare professional.
- Patient Mobility: El low-profile design allows patients to wear normal footwear and maintain mobility.
- Clinical Conditions: Appropriate for patients with an Ankle Brachial Pressure Index (ABPI) of ≥ 0.8. Always consult a healthcare professional to determine suitability for your specific condition.
- Seguiment: Regularly monitor the limb for signs of discomfort, numbness, tingling, or changes in skin color. If any adverse reactions occur, remove the system immediately and consult a healthcare professional.
Cura i eliminació
This product is for single use only. Do not attempt to wash or sterilize for reuse, as this may compromise its effectiveness and hygiene.
- Emmagatzematge: Emmagatzemar en un lloc fresc i sec, lluny de la llum solar directa.
- Eliminació: Dispose of used compression systems according to local medical waste disposal guidelines.
- Sense làtex: This product is latex-free, reducing the risk of latex-related allergic reactions.
Resolució de problemes
If you experience any issues or discomfort while using the 3M Coban 2 Layer Compression System, consider the following:
- Malestar o dolor: If the compression feels too tight, causes pain, numbness, or tingling, remove the system immediately. Reapply with less tension or consult a healthcare professional.
- Lliscament: Ensure both layers are applied smoothly and with appropriate tension. The cohesive properties of the layers should prevent slippage. If slippage occurs, reapplication may be necessary.
- Irritació de la pell: If skin irritation or allergic reaction occurs, discontinue use and consult a healthcare professional.
For persistent issues or medical concerns, always consult a qualified healthcare professional.
Especificacions del producte
| Característica | Detall |
|---|---|
| Nom del producte | 3M Coban 2 Layer Compression System |
| Número de model | 2094 (REF) |
| ASIN | B0057Z2MAO |
| Marca | 3M |
| Fabricant | 3M Healthcare |
| Components del sistema | Roll No. 1 (Comfort Layer), Roll No. 2 (Compression Layer) |
| Roll No. 1 Dimensions | 4 inches x 2.9 yards (10 cm x 2.7 m) |
| Roll No. 2 Dimensions | 4 inches x 5.1 yards stretched (10 cm x 4.7 m stretched) |
| Recompte d'unitats | 8.0 Count (Each kit contains 2 rolls) |
| Nombre d'articles | 8 kits per case |
| Franja d'edat | Adult |
| Ús per a | Leg (and other areas where compression is appropriate) |
| Latex Status | Sense làtex |
Garantia i Suport
3M products are manufactured to high-quality standards. For specific warranty information or product support, please refer to the official 3M weblloc web o contacteu directament amb el servei d'atenció al client de 3M.
Informació de contacte: Please visit the official 3M website for the most current contact details for customer support and product inquiries.
Exempció de responsabilitat: This manual provides general information and instructions. Always consult a healthcare professional for medical advice and proper application techniques for your specific condition.