Lasko Oscillating Ceramic Tower Space Heater

1. Instruccions de seguretat importants

LLEGIU TOTES LES INSTRUCCIONS ABANS D'UTILIZAR AQUEST ESCALFADOR.

• Connexió directa: Always plug heaters directly into a 120V wall outlet/receptacle. Never use with an extension cord, power strip, surge protector, multiple outlet adapter, cord reel, or outlet-type air freshener. Using such devices may create a fire hazard.
• Connexió segura: Ensure the heater plug fits tightly into the outlet before each use. During use, check to make certain the heater plug is not overheating. If necessary, have a qualified electrician check and/or replace the wall outlet.
• Endoll polaritzat: Aquest aparell té un endoll polaritzat (una fulla és més ampla que l'altra). Per reduir el risc de descàrrega elèctrica, aquest endoll només està pensat per encaixar en una presa polaritzada d'una manera. Si l'endoll no encaixa completament a la presa de corrent, inverteix l'endoll. Si encara no encaixa, poseu-vos en contacte amb un electricista qualificat. No intenteu derrotar aquesta característica de seguretat.
• Protecció contra el sobreescalfament: The heater is equipped with built-in overheat protection that automatically shuts off the unit if it becomes too hot.
• Exterior Cool-Touch: The exterior of the heater is designed to remain cool to the touch during operation, enhancing safety.
• Col·locació: Keep the heater away from flammable materials such as furniture, pillows, bedding, papers, clothes, and curtains. Maintain at least a 3-foot (0.9 meter) clearance from the front, sides, and rear of the heater.
• Supervisió: Do not leave the heater operating unattended, especially around children or pets.

2. Producte acabatview

The Lasko Oscillating Ceramic Tower Space Heater Model 5309 is a slim, portable heating solution designed to provide comfort in small to medium-sized rooms. Its ceramic heating element delivers efficient warmth, while the oscillating function helps distribute heat evenly. The unit features user-friendly electronic controls for temperature and heat settings, along with important safety features.

Davant view of the Lasko Oscillating Ceramic Tower Space Heater Model 5309, showcasing its slim design and control panel at the top.

Característiques principals:

• Disseny compacte: Stands 16 inches tall and 6 inches wide, ideal for floor or tabletop use.
• Termostat ajustable: Electronic thermostat allows temperature adjustment from 65°F to 85°F.
• Two Quiet Heat Settings: Choose between high and low heat for personalized comfort.
• Widespread Oscillation: Optional oscillation feature distributes warm air across a wider area.
• Portabilitat: Lightweight (approximately 4.6 lbs) with a molded carrying handle for easy relocation.
• Seguretat integrada: Includes overheat protection and a cool-touch exterior.

3. Configuració

1. Desembalar: Traieu amb cura l'escalfador del seu embalatge. Conserveu l'embalatge per a l'emmagatzematge fora de temporada.
2. Col·locació: Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 meters) of clear space around the heater to allow for proper airflow and prevent fire hazards. Do not block air intakes or exhaust openings.
3. Connexió d'alimentació: Plug the heater directly into a 120V AC wall outlet. Do not use extension cords or power strips.

4. Instruccions de funcionament

The Lasko 5309 heater features intuitive controls located on the top panel.

Top control panel with buttons for Power, Oscillate, and Temperature, along with indicator lights for heat levels and thermostat settings.

1. Encès/apagat: Premeu el botó Poder button to turn the heater on or off. A red indicator light will illuminate when the heater is active.
2. Seleccioneu la configuració de calor: Use the dial or button (depending on model variation) to select your desired heat output:
   • Només ventilador: Provides air circulation without heat.
   • Calor baix (1): Proporciona un nivell de calor més baix.
   • Calor alt (2): Provides maximum heat output.
3. Ajustar el termòstat: Utilitza el Temp button or dial to set the desired room temperature between 65°F and 85°F. The heater will cycle on and off to maintain this temperature.
4. Activa l'oscil·lació: Premeu el botó Oscil·lar button to enable the widespread oscillation feature, which moves the heater from side to side to distribute heat more broadly. Press again to stop oscillation.

Demonstration Videos:

5. Manteniment

• Neteja: Always unplug the heater before cleaning. Use a soft cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents. Ensure no water or liquids enter the interior of the heater.
• Emmagatzematge: Quan no l'utilitzeu, guardeu l'escalfador en un lloc fresc i sec. Es recomana guardar-lo en el seu embalatge original per protegir-lo de la pols i els danys.

6. Solució De Problemes

• Heater Does Not Turn On:
  • Check if the power cord is securely plugged into a functioning 120V outlet.
  • Assegureu-vos que el botó d'engegada estigui premut.
  • Comproveu que el termòstat estigui configurat a una temperatura superior a la temperatura ambient actual.
• L'escalfador s'apaga inesperadament:
  • This unit is equipped with an overheat protection feature. If the heater overheats, it will automatically shut off. Unplug the heater, wait 10 minutes for it to cool down, then plug it back in and restart.
  • Check for any obstructions to the air intake or exhaust. Clear any dust or debris.
• Sense sortida de calor:
  • Confirm that a heat setting (Low or High) is selected, not just the fan-only mode.
  • Ajusteu el termòstat a un valor més alt.

7. Especificacions

Image showing the dimensions of the Lasko 5309 Ceramic Tower Heater.

8. Garantia i Suport

This Lasko heater is covered by a Garantia limitada d'3 any from the date of purchase. For warranty claims, technical support, or replacement parts, please contact Lasko customer service directly.

Please refer to the official Lasko weblloc web o l'embalatge del producte per obtenir la informació de contacte més actualitzada i els termes de garantia detallats.