Introducció
This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of your OSRAM Sylvania QHE3x32T8/UNV-PSN-SC Fluorescent Lamp Ballast. Please read this manual thoroughly before installation and retain it for future reference. This ballast is designed for use with 3-lamp, 32W T8 fluorescent lamps and operates on 120-277V, 50/60Hz electrical systems.
Instruccions importants de seguretat
ADVERTÈNCIA: Risc de descàrrega elèctrica. Desconnecteu l'alimentació abans de la instal·lació o el manteniment.
- Installation must be performed by a qualified electrician in accordance with the National Electrical Code and local codes and ordinances.
- Assegureu-vos el subministrament voltage is compatible with the ballast's operating voltagi (120-277V).
- Do not install damaged products. Inspect the ballast for damage before installation.
- No feu ni modifiqueu cap forat obert en un recinte de cablejat o components elèctrics durant la instal·lació del kit.
- Per evitar danys o abrasió al cablejat, no exposeu el cablejat a les vores de la xapa o altres objectes punxants.
- This ballast is designed for indoor use in dry locations unless otherwise specified.
- Ground the ballast case properly to prevent electrical hazards.
Producte acabatview
The OSRAM Sylvania QHE3x32T8/UNV-PSN-SC is a high-efficiency, programmed rapid start electronic ballast designed for optimal performance with T8 fluorescent lamps. It features universal voltage input and lamp striation control for consistent light output.
Característiques principals:
- Programmed Rapid Start T8 Electronic Ballast
- Vol. Universaltage: 120-277 V, 50/60 Hz
- High-Efficiency - Type CC
- Factor de potència alt
- Lamp Control de l'estriació
- Classificació de so A
- Inherent Thermal Protection
- UL Listed Class P, Type 1 Outdoor, Type CC
- Complies with FCC 47 CFR Part 18, Non-Consumer
- No PCBs
Imatge 1: Part superior view of the OSRAM Sylvania QHE3x32T8/UNV-PSN-SC ballast, showing product labeling and specifications.
Instal·lació i cablejat
Before beginning installation, ensure all power to the fixture is disconnected at the circuit breaker. Follow the wiring diagram carefully for proper and safe connection.
Diagrama de cablejat:
Image 2: Detailed wiring diagram for the OSRAM Sylvania QHE3x32T8/UNV-PSN-SC ballast, illustrating connections for input power and lamp sortides.
Instruccions de cablejat:
- Potència d'entrada: Connect the black wire to the LINE (L) input and the white wire to the NEUTRAL (N) input. Ensure the ground wire is securely connected to the ballast case and fixture ground.
- Lamp Connexions:
- Connect the blue/white wires to the first lamp.
- Connect the blue wires to the second lamp.
- Connect the red wires to the third lamp.
- Connect the yellow wires to the common lamp terminals as indicated in the diagram.
- Muntatge: Securely mount the ballast within the fixture using appropriate fasteners. Ensure adequate ventilation around the ballast.
- Voltage Compatibilitat: This ballast is designed for universal voltage operation (120V or 277V). Verify your supply voltage partits.
Lamp Compatibilitat:
This ballast is compatible with the following T8 fluorescent lamp configuracions:
| Lamp Tipus | Line Current (120V) | Line Current (277V) | Min. Temp. d'inici |
|---|---|---|---|
| 3 x FO32T8 | 0.69A | 0.29A | -20 °F/-29 °C |
| 3 x FO25T8 | 0.53A | 0.23A | -20 °F/-29 °C |
| 3 x FO17T8 | 0.36A | 0.16A | -20 °F/-29 °C |
| 2 x FO40T8 | 0.63A | 0.27A | 0 °F/-18 °C |
| 2 x FO32T8 | 0.51A | 0.23A | -20 °F/-29 °C |
Also suitable for "U" bend and SS equivalents.
Instruccions de funcionament
Once properly installed and wired, the OSRAM Sylvania QHE3x32T8/UNV-PSN-SC ballast operates automatically. Upon applying power, the ballast will initiate the programmed rapid start sequence to ignite the connected fluorescent lamps. This ensures quick and reliable lamp ignition and extends lamp vida.
- Assegureu-vos que tot lamps are correctly seated in their sockets before applying power.
- The ballast is designed for continuous operation within its specified temperature and voltagrangs e.
- No user adjustments are required for normal operation.
Manteniment
The OSRAM Sylvania QHE3x32T8/UNV-PSN-SC ballast is designed for long-term, maintenance-free operation. However, periodic inspection of the lighting fixture and its components is recommended.
- Desconnexió d'alimentació: Always disconnect power at the circuit breaker before performing any inspection or maintenance.
- Neteja: Keep the ballast and fixture free from dust and debris to ensure proper heat dissipation. Use a dry, lint-free cloth for cleaning.
- Inspecció del cablejat: Comproveu periòdicament les connexions del cablejat per comprovar si estan ben ajustades i si hi ha signes de desgast o danys.
- Lamp Substitució: Substitueix lamps with compatible T8 fluorescent lamps as specified in the "Lamp Compatibility" section. Ensure power is off during lamp substitució.
- Ballast Replacement: If the ballast fails, replace it with an identical OSRAM Sylvania QHE3x32T8/UNV-PSN-SC model or an approved equivalent.
Resolució de problemes
If your lighting fixture is not operating correctly, consult the following troubleshooting guide. Always disconnect power before attempting any inspection or repair.
| Problema | Causa possible | Solució |
|---|---|---|
| Lamps no s'il·luminen | Sense energia a l'aparell Cablejat incorrecte Defectuós lamps Ballast defectuós | Comproveu l'interruptor de circuit i l'interruptor de paret. Verify wiring against the diagram. Substitueix lamps with known good ones. Replace ballast if lamps are good and wiring is correct. |
| Lamps flicker or are dim | solta lamp connexions Incorrecta lamp tipus Vol d'entrada baixtage Envelliment lamps | Assegureu-vos lampestan ben asseguts. Verifica lamps are compatible T8 types. Comproveu el volum de subministramenttage. Substitueix lamps. |
| Ballast hums excessively | Muntatge solt Vol incorrectetage Internal ballast issue | Premeu els cargols de muntatge. Verifiqueu el volum d'entradatage. Replace ballast if hum persists and is excessive. |
Especificacions tècniques
| Característica | Detall |
|---|---|
| Número de model | QHE3x32T8/UNV-PSN-SC |
| Número de part | 51413 |
| Marca | OSRAM (Manufacturer: Sylvania) |
| Entrada Voltage | 120-277V AC |
| Freqüència | 50/60Hz |
| Lamp Tipus | T8 Fluorescent (e.g., F32T8, FO32T8, F25T8, F17T8, F40T8) |
| Nombre de Lamps | 3 (or 2 for F40T8/F32T8) |
| Wattage (per lamp) | 32W (for F32T8) |
| Mètode d'inici | Programmed Rapid Start |
| Eficiència | High-Efficiency - Type CC |
| Factor de potència | Factor de potència alt |
| Pes de l'article | 1.32 lliures (aprox. 0.6 kg) |
| Dimensions del producte (L x A x A) | 9.5 x 1.68 x 1.18 polzades (aprox. 24.1 x 4.3 x 3.0 cm) |
| Min. Start Temperature | -20°F (-29°C) for most T8 lamps; 0°F (-18°C) for 2xFO40T8 |
| Certificacions | UL Listed, Type CC, FCC 47 CFR Part 18, RoHS compliant |
Informació de la garantia
OSRAM products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to the QUICKTRONIC® QHE3x32T8/UNV-PSN-SC ballast, please refer to the official OSRAM/Sylvania warranty documentation provided with your purchase or visit the OSRAM website. Typically, electronic ballasts come with a limited warranty covering defects in materials and workmanship under normal use.
Note: The "QUICK60+" System Warranty mentioned on the product label refers to a system warranty when used with specific OSRAM lamps. Consult OSRAM for details.
Atenció al client
For technical assistance, product inquiries, or support, please contact OSRAM/Sylvania customer service.
Technical Assistance Hotline: 1-800-LIGHTBULB (as indicated on product label)
You may also visit the official OSRAM weblloc web per obtenir recursos addicionals i opcions de contacte.
