1. Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of your LUX Pro PSD010BF Digital Non-Programmable Thermostat. This battery-powered thermostat is designed for heat-only systems with a fan, offering precise digital temperature control and a clear, easy-to-read display.
Imatge 1: Frontal view of the LUX Pro PSD010BF Digital Non-Programmable Thermostat.
Image 2: The PSD010BF thermostat seamlessly integrated into a home environment.
2. Informació de seguretat
- Always turn off power to the heating system at the main fuse or circuit breaker panel before installing or servicing the thermostat.
- Llegiu atentament totes les instruccions abans de la instal·lació i el funcionament.
- Assegureu-vos que totes les connexions de cablejat siguin segures i que compleixin els codis elèctrics locals.
- This thermostat is designed for low voltage systems only. Do not use with line voltage (120/240V) systems.
- Mantingueu les piles fora de l'abast dels nens.
3. Característiques
The LUX Pro PSD010BF thermostat offers a range of features designed for user convenience and efficient heating control:
- Precisió digital: Provides precise temperature control for reliable performance.
- Interruptor del ventilador: Includes a fan switch for convenient control (AUTO/ON).
- Funciona amb bateria: Operates solely on battery power (2 AA batteries included).
- Large LED Illuminated Display: Easy-to-read digital display with backlight for visibility in various lighting conditions.
- Attractive Slim Design: Modern aesthetic suitable for any room.
- Quick & Easy Temperature Change Buttons: Intuitive up/down buttons for setting desired temperature.
- F/C Selectable Temperature Display: Option to display temperature in Fahrenheit or Celsius.
- Fixed 5 Minute Minimum Run / Off Time: Protects heating equipment.
Image 3: Detailed diagram highlighting the key features and controls of the thermostat.
4. Compatibilitat
The LUX Pro PSD010BF thermostat is compatible with the following systems:
- Most 24-volt, single-stage heating systems, with or without a blower fan.
- Millivolt systems (e.g., gas fireplaces, floor furnaces).
This thermostat no pot be used to control:
- Sistemes de refrigeració.
- Heat pumps.
- 3-wire zone valves.
- 120/240 volt (line voltage) sistemes.
For other system types, please consult your dealer for alternative LUXPRO thermostats.
Image 4: Official compatibility guidelines for the thermostat.
5. Instal·lació
5.1 Llista de comprovació prèvia a la instal·lació
- Ensure the thermostat is compatible with your heating system (refer to Section 4).
- Gather necessary tools: Phillips screwdriver, wire strippers (if needed), drill (if new mounting holes are required).
- Turn off power to the heating system at the circuit breaker.
5.2 Treure el termòstat antic
- Apagueu el sistema de calefacció.
- Traieu la coberta del vostre termòstat antic.
- Note the wire connections. It is recommended to take a picture or label each wire with the terminal designation (e.g., R, W, G).
- Desconnecteu els cables i traieu la base antiga del termòstat de la paret.
5.3 Wiring Your New Thermostat
The PSD010BF is designed for simple 2-wire or 4-wire heat-only systems. Refer to the diagram below for typical wiring configurations.
Image 5: Wiring diagram for heating-only systems, including those with a fan. Note the jumper between RC and RH.
- Connect the wires from your heating system to the corresponding terminals on the new thermostat base.
- For heating-only systems, ensure the jumper between RC i RH terminals is installed.
- W1 terminal: Connect to the heating control wire.
- G terminal: Connect to the blower fan control wire (if applicable).
- Assegureu-vos que totes les connexions estiguin estretes i segures.
5.4 Muntatge del termòstat
- Secure the thermostat base to the wall using the provided screws. Avoid overtightening.
- Insert two fresh AA batteries into the battery compartment. Ensure correct polarity.
- Carefully align the thermostat front cover with the base and snap it into place.
6. Funcionament
6.1 Engegada i configuració inicial
- After installation and battery insertion, restore power to your heating system at the circuit breaker.
- The thermostat display should illuminate, showing the current room temperature.
- Use the F/C selectable temperature display option if you wish to change between Fahrenheit and Celsius (refer to the thermostat's internal settings or specific instructions for this model if available, otherwise assume it's a simple switch).
6.2 Configuració de la temperatura
- Utilitza el ▲ (Amunt) i ▼ (Down) buttons on the front of the thermostat to adjust the desired temperature.
- The display will show the set temperature briefly, then revert to the current room temperature.
- The heating system will activate when the room temperature falls below your set temperature.
6.3 Control del ventilador
The thermostat features a fan slide switch with two positions:
- AUTOMÀTIC: The fan will run only when the heating system is actively heating. This is the recommended setting for normal operation.
- ACTIVITAT: The fan will run continuously, regardless of whether the heating system is active.
6.4 Mode del sistema
The thermostat features a mode slide switch with two positions:
- CALOR: The thermostat will control your heating system to maintain the set temperature.
- DESACTIVAT: The heating system is turned off. The thermostat will not activate the heater.
7. Manteniment
7.1 Substitució de la bateria
The thermostat is powered by two AA batteries. Replace them annually or when the low battery indicator appears on the display.
- Gently pull the thermostat cover from the base to access the battery compartment.
- Traieu les piles velles i elimineu-les de manera responsable.
- Introduïu dues piles alcalines AA noves, assegurant-vos de la polaritat correcta (+/-).
- Snap the thermostat cover back onto the base.
Nota: Replacing batteries typically does not affect your temperature settings.
7.2 Neteja
Netegeu l'exterior del termòstat amb un drap suau iamp tela. No utilitzeu netejadors abrasius ni dissolvents.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense pantalla / Pantalla en blanc | Piles gastades o instal·lades incorrectament. | Substituïu les piles per piles alcalines AA noves, assegurant-vos de la polaritat correcta. |
| Heating System Not Responding |
|
|
| Lectura de temperatura inexacta | Thermostat located near a heat source, draft, or direct sunlight. | Relocate the thermostat to a more central location away from direct influences. Ensure proper air circulation around the unit. |
| Fan Runs Continuously | Interruptor del ventilador en posició ON. | Set the fan switch to AUTO for automatic operation with heating cycles. |
9. Especificacions
- Model: PSD010BF
- Font d'alimentació: 2 piles AA (incloses)
- Voltage: 24 Volts (low voltage)
- Tipus de control: Push Button, Slide Switch
- Tipus de visualització: Digital, LED Backlit
- Dimensions del producte: 1.25 "P x 3.5" W x 5.25" H
- Pes de l'article: 1.92 unces
- Material: Plàstic
- Color: Blanc
- Tipus de muntatge: Muntatge de paret
- Usos específics: Heating only systems
10. Garantia i Suport
For warranty information or technical support, please refer to the official LUX website or contact LUX customer service directly. Keep your purchase receipt as proof of purchase.
LUX Customer Support: www.luxproproducts.com/support
