Producte acabatview
The QA1 TS708 Shock is a high-performance, single-adjustable shock absorber designed for automotive applications, specifically for the rear position. It features a durable anodized finish and is engineered to provide precise control over vehicle suspension. This manual provides essential information for the proper installation, operation, and maintenance of your TS708 shock.
Les característiques clau inclouen: SHOCK STOCKER S-ADJ 13.5020.50 STUD/EYE-P.
Configuració i instal·lació
Proper installation is crucial for the performance and longevity of your QA1 TS708 shock. It is recommended that installation be performed by a qualified mechanic.
Image: The QA1 TS708 shock absorber, a silver cylindrical unit with black end fittings and an adjustment dial, shown alongside its associated mounting hardware including black rubber bushings, silver washers, and hexagonal nuts.
Precaucions de seguretat:
- Utilitzeu sempre l'equip de protecció individual (EPI) adequat, incloent-hi ulleres i guants de seguretat.
- Assegureu-vos que el vehicle estigui ben recolzat sobre un gat o un elevador abans de començar a treballar.
- No treballeu mai sota un vehicle suportat només per un gat.
- Refer to your vehicle's service manual for specific suspension component removal and installation procedures.
Passos d'instal·lació (directrius generals):
- Preparar el vehicle: Park the vehicle on a level surface, engage the parking brake, and block the wheels. Lift the vehicle and support it securely.
- Elimina el xoc antic: Carefully remove the existing shock absorber by unbolting its upper and lower mounting points. Note the orientation of any bushings or washers.
- Inspeccioneu els punts de muntatge: Clean and inspect the vehicle's shock mounting points for any damage or wear.
- Instal·leu el nou Shock: Install the QA1 TS708 shock, ensuring all bushings, washers, and nuts are correctly positioned. The TS708 features a stud/eye-P mounting configuration.
- Apretar els elements de fixació: Torque all fasteners to the vehicle manufacturer's specifications. Do not overtighten.
- Vehicle inferior: Baixeu el vehicle a terra amb cura.
- Comprovació final: Bounce the vehicle to settle the suspension and re-check all fasteners for tightness.
Funcionament i ajust
The QA1 TS708 is a single-adjustable shock, meaning its damping characteristics can be tuned to suit various driving conditions and preferences. The adjustment is typically made via a dial located on the shock body.
Directrius d'ajustament:
- Understanding Adjustment: The adjustment dial controls the rebound damping. Turning the dial typically increases or decreases the resistance to the shock extending.
- Configuració inicial: Start with the manufacturer's recommended baseline setting, if available, or a neutral setting (e.g., halfway through the adjustment range).
- Testing and Fine-tuning: Drive the vehicle in various conditions and adjust the shocks incrementally. A firmer setting (more damping) can improve handling and reduce body roll, while a softer setting (less damping) can improve ride comfort.
- Simetria: Ensure both rear shocks are set to the same adjustment level for balanced performance.
- Nota: Refer to QA1's official documentation or website for specific adjustment procedures and recommended settings for your application.
Manteniment
Regular maintenance helps ensure optimal performance and extends the lifespan of your QA1 TS708 shocks.
- Inspecció periòdica: Periodically inspect the shocks for signs of leaks, damage, or wear on the body, seals, and mounting points.
- Neteja: Keep the shock bodies clean, especially around the shaft and seals, to prevent dirt and debris from causing premature wear. Use mild soap and water.
- Comprovació de fixació: Comproveu anualment l'estanquitat de tots els cargols i femelles de muntatge.
- Bushing Inspection: Inspect the rubber bushings for cracking, hardening, or excessive wear. Replace them if necessary.
Resolució de problemes
If you experience issues with your QA1 TS708 shocks, consider the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Excessive Bouncing/Poor Ride Control | Incorrecte damping setting, worn shock, improper installation. | Ajustar damping setting, inspect for leaks/damage, re-check installation. |
| Soroll de dringadillo/clunking | Loose mounting hardware, worn bushings, internal shock damage. | Tighten fasteners, replace worn bushings, inspect shock for damage. |
| Fuites de fluids | Segell danyat, fallada de components interns. | Shock requires replacement or professional repair. |
If troubleshooting steps do not resolve the issue, contact QA1 customer support or a certified automotive technician.
Especificacions
| Atribut | Detall |
|---|---|
| Fabricant | QA1 Precision Products |
| Marca | QA1 |
| Número de model | TS708 |
| Dimensions del producte | 46.23 x 10.16 x 6.1 cm |
| Pes de l'article | 1.72 kg |
| Acabat exterior | Anoditzat |
| Posició | posterior |
| Estil | Modern |
| Tipus de servei del vehicle | Camió |
| UPC | 806990060495 |
Garantia i Suport
QA1 Precision Products stands behind the quality of its products. For specific warranty terms and conditions, please refer to the warranty information provided with your purchase or visit the official QA1 weblloc.
Atenció al client:
If you have questions regarding the installation, operation, or maintenance of your TS708 shock, or require technical assistance, please contact QA1 customer support directly. Contact information can typically be found on the QA1 official weblloc o embalatge del producte.
Note: Always provide your product model number (TS708) and any relevant purchase details when contacting support.
