Manual d'instruccions del llum per sota l'armari de bany Rabalux 2322

1. Introducció

The Rabalux 2322 Bath Under-Cabinet Light is designed to provide efficient illumination and convenient power access in indoor environments. Its white finish integrates discreetly into various interior styles. This manual provides essential information for safe installation, operation, and maintenance of your Rabalux 2322 under-cabinet light.

Please read these instructions carefully before installation and use, and retain them for future reference.

Imatge 1.1: Frontal view of the Rabalux 2322 Under-Cabinet Light, showing the integrated fluorescent tube, power switch, and two electrical outlets on the right side.

2. Instruccions de seguretat

Per garantir un funcionament segur i evitar danys, observeu les següents pautes de seguretat:

• Només per a ús interior: This product is designed exclusively for indoor use in enclosed spaces.
• Desconnexió d'alimentació: Always disconnect the main power supply before performing any installation, maintenance, cleaning, or lamp substitució.
• Classificació IP20: The fixture has an IP20 protection rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in areas where direct water contact or high humidity is present, despite the "Bath" designation which refers to style, not water resistance.
• Instal·lació professional: If you are not confident with electrical installations, consult a qualified electrician.
• Voltage: Assegureu-vos que la font d'alimentació voltage matches the product's requirements (230 Volt).
• Lamp Tipus: Use only the specified lamp type (G13 T8 15W) for replacement.
• Ventilació: Assegureu-vos que hi hagi una ventilació adequada al voltant de l'aparell per evitar el sobreescalfament.
• Neteja: No utilitzeu agents de neteja abrasius o corrosius.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents i no estiguin danyats:

• 1 x Rabalux 2322 Under-Cabinet Light fixture
• 1 x T8 15W Fluorescent Tube (950 lm; 2700 K)
• Maquinari de muntatge (cargols, ancoratges)
• Manual d'instruccions

Note: A connection cable for power supply is not included and must be provided separately.

4. Configuració i instal·lació

The Rabalux 2322 is designed for recessed mounting under cabinets or shelves. Follow these steps for installation:

1. Preparació: Assegureu-vos que l'alimentació principal de la zona d'instal·lació estigui desconnectada a l'interruptor.
2. Lloc de muntatge: Select a suitable, stable surface under a cabinet or shelf. Consider the dimensions of the fixture (60.5 cm length, 6.5 cm height, 8.5 cm depth) to ensure proper fit and clearance.
3. Marcatge: Use the fixture as a template to mark the drilling points for the mounting hardware.
4. Perforació: Perforeu forats pilot als llocs marcats. Inseriu ancoratges de paret si cal.
5. Cablejat: Connect the power supply cable (not included) to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local electrical codes. The fixture is designed for AC power (230V).
6. Muntatge de l'aparell: Secure the fixture to the mounting surface using the provided screws.
7. Lamp Instal·lació: Carefully insert the T8 fluorescent tube into the G13 sockets. Ensure it is seated correctly.
8. Comprovació final: Comproveu dues vegades totes les connexions i assegureu-vos que el dispositiu estigui ben muntat.
9. Encès: Resta l'alimentació al disjuntor.

Image 4.1: Dimensional drawing of the Rabalux 2322 Under-Cabinet Light, indicating a length of 605mm, a height of 65mm, and a depth of 85mm.

5. Instruccions de funcionament

The Rabalux 2322 Under-Cabinet Light is straightforward to operate:

• Funcionament lleuger: Use the integrated switch located on the right side of the fixture to turn the light ON or OFF.
• Preses de corrent: The two integrated power outlets can be used to connect small electrical appliances. Ensure the total wattage of connected devices does not exceed the fixture's maximum capacity.
• Temps d'escalfament: Fluorescent lamps may require a few seconds to reach full brightness after being switched on. This is normal operation.

6. Manteniment

Regular maintenance ensures the longevity and optimal performance of your light fixture:

• Neteja: Desconnecteu l'alimentació abans de netejar-la. Netegeu l'aparell amb un drap suau, sec o lleugerament humit.amp drap. No utilitzeu productes químics agressius, netejadors abrasius ni dissolvents.
• Lamp Substitució:
  1. Desconnecteu l'alimentació a l'interruptor principal.
  2. Permet la lamp to cool down if it has been recently in use.
  3. Carefully remove the old T8 fluorescent tube from its G13 sockets.
  4. Insert a new G13 T8 15W fluorescent tube, ensuring it is securely seated.
  5. Restaura el poder.
• Inspecció: Periodically check the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and address them immediately.

7. Solució De Problemes

If you encounter problems with your Rabalux 2322 light, refer to the following common issues and solutions:

If the problem persists after attempting these solutions, consult a qualified electrician or contact Rabalux customer support.

8. Especificacions

9. Garantia i Suport

Garantia: For detailed warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.

Suport: If you require technical assistance or have questions not covered in this manual, please contact Rabalux customer service through their official weblloc web o la informació de contacte proporcionada amb el vostre producte.