Lasko 5307 16-Inch Oscillating Ceramic Tower Space Heater User Manual

1. Introducció i finalview

The Lasko 5307 Oscillating Ceramic Tower Heater is a compact 16-inch unit designed for versatile use on floors or tables. It provides 1500 watts of quiet, comforting warmth and features an adjustable thermostat, push-button oscillation, and a fan-only setting. This heater comes fully assembled and includes built-in safety features.

Dimensions: 6.75 cm de llargada x 5.6 cm d'amplada x 16.02 cm d'alçada

Pes: 4.6 lliures

2. Informació important de seguretat

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. (Proposition 65 Warning)

• PLUG HEATERS DIRECTLY INTO A 120V WALL OUTLET/RECEPTACLE ONLY. MAI USEU AMB UN CORDÓ D'EXTENSIÓ.
• DO NOT PLUG HEATER INTO ANY OTHER CORD CONNECTED DEVICE, SUCH AS A POWER STRIP, SURGE PROTECTOR, MULTIPLE OUTLET ADAPTER, CORD REEL OR OUTLET-TYPE AIR FRESHENER. The use of such devices may create a fire hazard.
• DO NOT PLUG MULTIPLE DEVICES IN THE SAME OUTLET OR ON THE SAME CIRCUIT AS THE HEATER.
• FAULTY WALL OUTLET CONNECTIONS MAY CAUSE THE WALL OUTLET TO OVERHEAT. Be sure that the heater plug fits tightly into the outlet before each use. During use, check to make certain the heater plug is not overheating. If necessary, have a qualified electrician check and/or replace the wall outlet.
• DO NOT USE THIS HEATER WITH ANY SOLID STATE SPEED CONTROL DEVICES.
• Aquest aparell té un endoll polaritzat (una fulla és més ampla que l'altra). Per reduir el risc de descàrrega elèctrica, aquest endoll només està pensat per encaixar en una presa polaritzada d'una manera. Si l'endoll no encaixa completament a la presa de corrent, inverteix l'endoll. Si encara no encaixa, poseu-vos en contacte amb un electricista qualificat. No intenteu derrotar aquesta característica de seguretat.
• The front grate of the heater does get hot to the touch. Do not leave it running unsupervised if you have animals or small children.
• The heater is equipped with built-in safety features to prevent overheating.

3. Configuració

The Lasko 5307 Ceramic Tower Heater comes fully assembled. Simply remove it from its packaging and place it on a stable, flat surface. Ensure the heater is positioned away from walls, furniture, and any flammable materials to allow for proper airflow.

Plug the cord directly into a 120-volt wall outlet. Do not use extension cords or power strips.

Figura 1: Frontal view of the Lasko 5307 space heater, showing its compact tower design.

4. Instruccions de funcionament

The Lasko 5307 features intuitive controls located on the top panel. These controls allow you to select heat settings, fan-only mode, and oscillation.

Figure 2: Close-up of the top control panel with dials for heat settings and temperature, and a button for oscillation.

Configuració d'energia i calor:

1. Activar: Rotate the lower dial to select one of the three settings:
   • 0: Apagat
   • Només ventilador: Activa el ventilador sense calor.
   • 1: Low Heat setting.
   • 2: High Heat setting (1500 watts).
2. Ajustar el termòstat: Use the upper dial to set your desired temperature. The heater will cycle on and off to maintain the selected temperature. Settings range from 65°F to Max.
3. A red indicator light on the front of the unit will illuminate when the heater is actively producing heat.

Funció d'oscil·lació:

• To activate the oscillation feature, press the "oscillate" button located on the top panel. The heater will begin to rotate from side to side, distributing warmth across a wider area.
• Press the "oscillate" button again to stop the rotation.

5. Manteniment

To ensure optimal performance and longevity of your Lasko 5307 heater, follow these care instructions:

• Desconnecteu sempre l'escalfador abans de netejar-lo.
• Use a soft cloth to wipe the exterior surfaces. Do not use water, alcohol, or abrasive cleaners.
• Regularly check the air intake and exhaust grilles for dust and debris. Use a vacuum cleaner with a brush attachment to gently remove any build-up.
• Guardeu l'escalfador en un lloc fresc i sec quan no l'utilitzeu.

6. Solució De Problemes

If your Lasko 5307 heater is not operating as expected, consider the following common issues:

• L'escalfador no s'encén:
  • Ensure the power cord is securely plugged into a functioning 120V wall outlet.
  • Comproveu si l'interruptor s'ha disparat.
  • Verify that the heat setting dial is not set to "0" (Off).
• Sense producció de calor:
  • Confirm that a heat setting (1 or 2) is selected, not just "Fan Only".
  • Adjust the thermostat dial to a higher setting. The heater may not produce heat if the ambient temperature is already above the set temperature.
• Heater stops unexpectedly:
  • The heater may have overheated. Unplug the unit and allow it to cool down for at least 10 minutes. Check for any obstructions to airflow before plugging it back in.
  • If the unit was accidentally tipped over, the safety shut-off feature would activate. Place the heater upright on a stable surface.

7. Especificacions

8. Garantia i Suport

The Lasko 5307 Ceramic Tower Heater comes with a 3-year limited warranty. For warranty claims or technical support, please refer to the contact information provided in the original product packaging or visit the official Lasko weblloc.