OSRAM H27/2-881 Automotive Bulb Instruction Manual

1. Introducció

This manual provides essential information for the installation, operation, and maintenance of your OSRAM H27/2-881 automotive halogen bulb. The OSRAM 881 (H27/2) bulb is designed as an original equipment replacement, offering reliable performance for various automotive lighting applications.

This product is a 12V 27W PGJ13 halogen bulb, compliant with ECE Reg 37 and SAE Reg' standards, and is UV safe for use with plastic headlamps.

Figure 1: OSRAM H27/2-881 bulb in its original packaging, illustrating the product and its specifications.

2. Informació de seguretat

WARNING: Improper handling or installation can lead to injury or damage.

• Always disconnect the vehicle's battery or the specific lighting circuit before attempting installation or replacement to prevent electrical shock.
• Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, reducing bulb life. Use clean gloves or a cloth.
• Allow the bulb to cool completely before handling or removing it from the vehicle. Bulbs can become extremely hot during operation.
• Keep bulbs out of reach of children.
• Elimineu les bombetes usades d'acord amb la normativa local.

Figure 2: Product packaging highlighting safety and compliance information, including the Inmetro safety rating.

3. Configuració (Instal·lació)

The installation process for automotive bulbs can vary significantly between vehicle makes and models. Always consult your vehicle's owner manual for specific instructions and diagrams relevant to your car's lighting system.

Passos generals d'instal·lació:

1. Preparar el vehicle: Ensure the vehicle is turned off, the ignition is removed, and the parking brake is engaged. For added safety, disconnect the negative terminal of the vehicle's battery.
2. Accediu a la bombeta: Locate the access point for the bulb you intend to replace. This may involve opening the hood, removing a wheel well liner, or accessing from inside the trunk.
3. Traieu la bombeta antiga: Carefully disconnect the electrical connector from the old bulb. Then, unclip or twist to remove the old bulb from its housing.
4. Instal·leu la bombeta nova: Holding the new OSRAM H27/2-881 bulb by its base (using gloves or a clean cloth), insert it into the housing. Ensure it is seated correctly and securely.
5. Torneu a connectar el connector elèctric: Reattach the electrical connector to the new bulb.
6. Prova la bombeta: Reconnect the vehicle's battery (if disconnected) and test the light function before reassembling any removed components.
7. Torneu a muntar: Securely reattach any components removed during the access phase.

Figura 3: Detallada view of the OSRAM H27/2-881 bulb, showing its PGJ13 base for proper installation.

4. Instruccions de funcionament

The OSRAM H27/2-881 bulb operates as part of your vehicle's existing lighting system. Once correctly installed, its operation is controlled by your vehicle's light switches and electrical system.

• Ensure your vehicle's battery is adequately charged for optimal bulb performance.
• Avoid frequently turning lights on and off, as this can reduce bulb lifespan.
• If the bulb does not illuminate, refer to the Troubleshooting section.

5. Manteniment

Automotive bulbs generally require minimal maintenance beyond replacement when they reach the end of their service life. However, regular checks can help ensure optimal performance and safety.

• Inspecció periòdica: Periodically check all vehicle lights to ensure they are functioning correctly. This includes headlights, fog lights, and any other applications where this bulb type is used.
• Clean Headlamp Assemblees: Keep the exterior of your headlamp assemblies clean from dirt and debris to maximize light output.
• Substitució ràpida: Replace burnt-out bulbs promptly to maintain vehicle safety and compliance with traffic laws. Always replace with the correct bulb type (OSRAM H27/2-881 or equivalent).

6. Solució De Problemes

If your OSRAM H27/2-881 bulb is not functioning as expected, consider the following troubleshooting steps:

• La bombeta no s'encén:
  • Check the electrical connection to the bulb. Ensure it is securely attached.
  • Inspect the vehicle's fuse box for a blown fuse related to the lighting circuit. Replace if necessary.
  • Verify that the bulb is correctly seated in its housing.
  • If the bulb is new, ensure it is the correct voltage i wattage per al teu vehicle.
  • Test the bulb in another working socket if possible, or test the socket with a known working bulb.
• La llum és tènue o parpelleja:
  • Check for loose connections at the bulb or wiring harness.
  • Inspect the bulb for any visible damage or discoloration on the glass.
  • Ensure the vehicle's charging system is functioning correctly, providing stable voltage.
  • A dim light could indicate the bulb is nearing the end of its lifespan.

If these steps do not resolve the issue, it is recommended to consult a qualified automotive technician.

7. Especificacions

8. Informació de la garantia

Specific warranty terms for the OSRAM H27/2-881 bulb may vary by region and retailer. For detailed warranty information, please retain your proof of purchase and consult the official OSRAM weblloc web o poseu-vos en contacte amb el vostre punt de venda.

9. Suport

For technical assistance, product inquiries, or further support regarding your OSRAM H27/2-881 bulb, please visit the official OSRAM website or contact OSRAM customer service through the contact information provided on their weblloc.

You can also refer to your vehicle's manufacturer for specific guidance on bulb replacement and electrical system compatibility.