Manual d'usuari de la impressora làser en color Xerox 7800/DX Phase

Producte acabatview

The Xerox 7800/DX Phase Color Laser Printer is designed for professional environments requiring high-quality color printing and robust performance. This printer offers advanced capabilities for graphic-intensive tasks, including industry-leading media flexibility and professional color management technologies.

Figura 1: Frontal view of the Xerox 7800/DX Phase Color Laser Printer, showcasinel seu disseny de diverses safates i el panell de control.

Instruccions de configuració

1. Desembalatge i col·locació

• Carefully remove the printer from its packaging. Due to its weight (approximately 256 pounds), it is recommended to use appropriate lifting equipment or assistance.
• Place the printer on a stable, level surface capable of supporting its weight and dimensions (27.52 x 25.24 x 37.52 inches). Ensure adequate ventilation around the unit.

2. Connexió d'alimentació

• Connecteu el cable d'alimentació a la impressora i després a una presa de corrent amb connexió a terra.
• Premeu el botó d'engegada per encendre la impressora.

3. Toner Cartridge Installation

The Xerox 7800/DX uses separate toner cartridges for Black, Cyan, Magenta, and Yellow. Refer to the printer's internal diagrams for specific slot locations.

1. Obriu el panell d'accés frontal de la impressora.
2. Unpack each toner cartridge (compatible cartridges include 05R02801, 05R02802, 05R02803, 05R02804, 05R02805, 05R02806).
3. Sacsegeu suaument el cartutx per distribuir el tòner uniformement.
4. Insert each cartridge into its corresponding color-coded slot until it clicks into place.
5. Close the front access panel.

Figura 2: Example of an internal printer view, indicating where toner cartridges are typically installed.

4. Carregant paper

The printer features multiple paper trays with a maximum input sheet capacity of 3140 sheets.

1. Pull out the desired paper tray. The printer has 2 trays as standard.
2. Adjust the paper guides to fit the paper size. The printer supports various sizes, including 8.5 x 11 inch and up to 11 inches in width.
3. Load the paper (plain paper is supported) into the tray, ensuring it is flat and below the maximum fill line.
4. Empenyeu suaument la safata cap a dins de la impressora.
5. Confirmeu el tipus i la mida del paper al tauler de control si se us demana.

5. Instal·lació de programari i controladors

To enable printing from your computer, install the necessary drivers.

• The Xerox 7800/DX is compatible with PC, Mac, and Unix operating systems.
• Visit the official Xerox support weblloc web per descarregar els controladors més recents per al vostre sistema operatiu.
• Seguiu les instruccions a la pantalla per completar la instal·lació.
• Connect the printer to your computer via USB or Ethernet cable.

Instruccions de funcionament

1. Tauler de control acabatview

The printer features a touchscreen control panel for easy navigation and settings adjustment. Use the touch interface to access menus, check printer status, and configure print jobs.

Figura 3: Detallada view of the printer's touchscreen control panel, showing various menu options.

2. Impressió bàsica

1. Obriu el document que voleu imprimir a l'ordinador.
2. Seleccioneu "Imprimir" al menú de l'aplicació.
3. Choose the Xerox 7800/DX printer from the list of available printers.
4. Adjust print settings as needed, such as:
   • Color/Monocrom: The printer supports full color output with a maximum resolution of 1200 x 2400 dpi.
   • Impressió a doble cara: Automatic dual-sided printing is supported.
   • Font del paper: Select the desired paper tray.
   • Còpies: Up to 312 copies per run.
5. Click "Print." The printer has a maximum print speed of 45 pages per minute (ppm) for both color and monochrome. Initial page print time is 1-2 seconds.

3. Connectivitat

• Ethernet: Connect the printer to your network using an Ethernet cable for shared access.
• USB: A single USB 2.0 port is available for direct connection to a computer.

Manteniment

1. Toner Replacement

When a toner cartridge is low or empty, the printer's control panel will display a notification. Replace cartridges as follows:

1. Open the front access panel.
2. Carefully remove the empty toner cartridge by pulling it straight out.
3. Unpack a new, genuine Xerox toner cartridge of the correct color.
4. Agiteu suaument el cartutx nou.
5. Insert the new cartridge into the corresponding slot until it locks into place.
6. Close the front access panel.

2. Neteja

• Exterior: Netegeu les superfícies exteriors amb un damp, drap sense borrissol. Eviteu productes de neteja abrasius.
• Interior: Periodically clean the interior of the printer, especially around the paper path and toner area, using a dry, lint-free cloth or a specialized printer vacuum. Refer to the printer's on-screen instructions for specific cleaning procedures.

Resolució de problemes

This section addresses common issues you might encounter. For more detailed troubleshooting, consult the full service manual or contact Xerox support.

Problemes comuns i solucions:

• La impressora no respon:
  • Comproveu les connexions d'alimentació i assegureu-vos que la impressora estigui engegada.
  • Verifiqueu les connexions de xarxa o del cable USB.
  • Reinicieu tant la impressora com l'ordinador.
  • Assegureu-vos que el controlador d'impressora correcte estigui instal·lat i seleccionat.
• Mala qualitat d'impressió:
  • Comproveu els nivells de tòner i substituïu els cartutxos que tinguin poc tòner.
  • Perform a print head cleaning or calibration from the control panel.
  • Assegureu-vos que feu servir el paper adequat per a la configuració d'impressió.
• Embussos de paper:
  • Follow the on-screen instructions on the control panel to locate and clear the jam.
  • Assegureu-vos que el paper estigui carregat correctament i que no hi hagi massa paper a les safates.
  • Remove any foreign objects from the paper path.

Especificacions tècniques

Informació de la garantia

The Xerox 7800/DX Phase Color Laser Printer comes with a full manufacturer's warranty. For specific terms and conditions, please refer to the documentation included with your product or visit the official Xerox weblloc.

Nota important: All returns must be authorized by Xerox Corp. No exceptions.

Atenció al client

For further assistance, technical support, or to access additional resources, please contact Xerox Customer Support or visit their official weblloc.

Podeu trobar més informació i recursos de suport a Botiga Xerox a Amazon or the main Xerox corporate weblloc.