1. Introducció
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the Duravit 111728001 2x4 Installation Frame with Concealed Tank. Please read these instructions carefully before beginning installation or use to ensure proper function and safety. Retain this manual for future reference.
2. Informació de seguretat
Always observe the following safety precautions during installation and maintenance:
- Assegureu-vos que es compleixin totes les normes locals de fontaneria i construcció.
- Tanqueu el subministrament principal d'aigua abans de començar qualsevol treball de fontaneria.
- Utilitzeu equips de protecció individual (EPI) adequats, com ara ulleres i guants de seguretat.
- If you are unsure about any step, consult a qualified professional plumber or installer.
- No modifiqueu el producte de cap manera que no estigui descrita en aquest manual.
3. Configuració i instal·lació
3.1 Components inclosos
- Duravit 2x4 Installation Frame
- Concealed Tank Assembly
- Maquinari de muntatge
- Inlet and Outlet Connections
3.2 Eines necessàries
- Cinta mètrica
- Nivell
- Trepant
- Wrenches (adjustable and pipe)
- Tornavisos (Phillips i cap pla)
- Llapis/Rotulador
- Pipe Cutter (if necessary)
3.3 Passos d'instal·lació
Follow these steps for proper installation of the Duravit 2x4 Installation Frame with Concealed Tank:
- Prepareu l'àrea d'instal·lació: Ensure the wall structure is suitable for supporting the frame and a wall-hung toilet. Mark the desired height and center line for the toilet.
- Muntar el marc: Position the installation frame against the wall studs. Use a level to ensure it is perfectly vertical and horizontal. Secure the frame to the wall studs using appropriate fasteners. Adjust the frame's feet to the desired height and secure them to the floor.
- Connectar el subministrament d'aigua: Connect the water supply line to the concealed tank's inlet valve. Ensure all connections are tight and leak-free.
- Connect Waste Outlet: Connect the tank's waste outlet to the building's drainage system. Verify proper alignment and secure all connections.
- Prova de fuites: Turn on the main water supply and allow the tank to fill. Carefully inspect all water connections for any signs of leaks. Address any leaks immediately.
- Install Wall Covering: Once the frame and tank are securely installed and tested, you can proceed with installing the wall covering (e.g., drywall, tile) over the frame, leaving access for the flush plate and toilet mounting points.
Figure 1: Duravit 111728001 2x4 Installation Frame with Concealed Tank. This image displays the Duravit 111728001 installation frame, featuring a blue metal frame supporting a white concealed tank with a Geberit branding. Yellow protective caps are visible on the plumbing connections at the bottom.
4. Funcionament
The Duravit 111728001 installation frame is designed to support a wall-hung toilet and house a concealed tank. Operation primarily involves the flush mechanism, which is activated by a compatible flush plate (sold separately) installed on the finished wall. The tank provides a dual-flush option for water conservation, typically with a full flush and a reduced flush volume.
5. Manteniment
Regular maintenance ensures the longevity and optimal performance of your concealed tank system:
- Neteja: Clean the visible parts of the flush plate and toilet regularly with mild, non-abrasive cleaners. Avoid harsh chemicals that could damage finishes.
- Comprovació de fuites: Periodically check for any signs of leaks around the toilet and access panel.
- Components interns: If issues arise with flushing, the internal components of the tank can be accessed via the flush plate opening. Consult a professional for internal repairs if necessary.
- Qualitat de l'aigua: In areas with hard water, mineral deposits may accumulate over time. Regular flushing and occasional inspection can help prevent issues.
6. Solució De Problemes
Consulteu la taula següent per veure els problemes habituals i les seves possibles solucions:
| Problema | Causa possible | Solució |
|---|---|---|
| Tank not filling | Water supply turned off; Inlet valve clogged or faulty | Check water supply; Clean or replace inlet valve. |
| Continuous water flow into bowl | Flush valve seal worn or obstructed; Fill valve not seating properly | Inspect and clean flush valve seal; Adjust or replace fill valve. |
| Fluor feble | Low water level in tank; Obstruction in waste pipe | Adjust fill valve to increase water level; Clear any obstructions in the waste pipe. |
| Flush plate not activating flush | Actuator rods misaligned or damaged | Access tank via flush plate opening and adjust/replace actuator rods. |
7. Especificacions
| Característica | Detall |
|---|---|
| Marca | Duravit |
| Número de model | 111728001 |
| Tipus d'instal·lació | Screw-In (for 2x4 wall construction) |
| Configuració | Double (referring to frame structure) |
| Tipus d'acabat | Polished (for frame components) |
| Quantitat de paquet d'articles | 1 |
| Data de primera disponibilitat | 15 de setembre de 2010 |
8. Garantia i Suport
Duravit products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Duravit website. For technical support or assistance with parts, please contact Duravit customer service directly. Keep your proof of purchase for warranty claims.
