1. Producte acabatview
The Eureka Chemical AS11 Fluid Film is a lanolin-based rust and corrosion preventative and lubricant. It is designed to provide long-term protection and lubrication for all metal surfaces. This product effectively prevents corrosion, lubricates moving parts, and displaces moisture, ensuring extended protection and functionality.
Figure 1: Eureka Chemical AS11 Fluid Film Aerosol Can. The can features a red cap and a silver body. The label is predominantly red with yellow accents, displaying the 'FLUID FILM' logo, 'POWERFUL RUST & CORROSION PROTECTION', 'PENETRANT & LUBRICANT', and key benefits like 'MULTI-PURPOSE', 'ECO-FRIENDLY', 'EASY TO APPLY', 'NO SOLVENTS', and 'BEST PERFORMANCE'. It also states 'Simply the best since 1943' and a 'DANGER!' warning regarding flammability and contents under pressure, with a net weight of 11.75 oz (333 grams).
2. Informació de seguretat
PERILL! This product is extremely flammable. Contents are under pressure. Read and understand all safety precautions before use.
- Mantenir allunyat de la calor, superfícies calentes, espurnes, flames obertes i altres fonts d'ignició. No fumar.
- No ruixeu sobre una flama oberta o una altra font d'ignició.
- No perforar ni cremar, fins i tot després del seu ús.
- Protegiu de la llum solar. No exposar a temperatures superiors a 50 °C (122 °F).
- Utilitzeu-lo només en una zona ben ventilada.
- Avoid breathing vapor or spray.
- Utilitzeu guants de protecció, protecció ocular i protecció facial.
- Mantenir fora de l'abast dels nens.
- In case of contact with eyes, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- If swallowed, immediately call a Poison Control Center or doctor. Do NOT induce vomiting.
3. Preparació i aplicació
3.1 Preparació de la superfície
For optimal results, ensure the surface to be treated is free from loose dirt, heavy rust flakes, or debris. While Fluid Film can penetrate existing rust, removing loose material will enhance adhesion and protection. No extensive cleaning or drying is typically required as the product displaces moisture.
3.2 Instruccions d'aplicació
- Agitar la llauna: Shake the aerosol can thoroughly for at least 30 seconds before use to ensure proper mixing of contents.
- Ventilació: Ensure application is performed in a well-ventilated area.
- Distància de polvorització: Hold the can approximately 8-12 inches (20-30 cm) from the surface.
- Aplicar uniformement: Apply a thin, even coat to the desired metal surface. For rust prevention, ensure complete coverage. For lubrication, apply to moving parts.
- Zones de difícil accés: For intricate or hard-to-reach areas, an extension straw (if provided or purchased separately) can be attached to the nozzle for precise application.
- Capes múltiples: For enhanced protection in harsh environments, a second coat may be applied after the first coat has settled (typically within 15-30 minutes).
4. Emmagatzematge i eliminació
4.1 Emmagatzematge
- Emmagatzemar en un lloc fresc, sec i ben ventilat.
- Keep away from direct sunlight and temperatures exceeding 50°C (122°F).
- Store away from ignition sources and incompatible materials.
- Keep container tightly closed when not in use.
4.2 Eliminació
Dispose of contents and container in accordance with local, regional, national, and international regulations. Do not puncture or incinerate empty cans.
5. Solució De Problemes
Fluid Film is a straightforward product. Most issues relate to application or storage.
- Clogging Nozzle: If the nozzle clogs, remove it and clean with a suitable solvent or replace it. Ensure the can is shaken well before each use.
- Uneven Spray: Ensure the can is held at the recommended distance and shaken thoroughly. Apply in smooth, even passes.
- Mala adherència: While Fluid Film adheres well to most surfaces, extremely oily or greasy surfaces may reduce adhesion. A light wipe-down of such contaminants can improve results.
6. Especificacions del producte
| Especificació | Detall |
|---|---|
| Marca | Eureka |
| Número de model | AS11 |
| Material | Lanolina |
| Formulari d'article | Líquid (Aerosol) |
| Volum líquid | 11.75 unces líquides (per llauna) |
| Recompte d'unitats | 141.0 Ounce (for a pack of 12) |
| Pes de l'article | 0.95 Pounds (per can) / 15.2 ounces (per can) |
| Usos recomanats | Automotive, Rust Prevention, Wear Prevention |
| Punt d'inflamació | 207 graus centígrads |
| Dimensions del producte | Approximately 10 x 10 x 10 inches (for a pack of 12) |
| UPC | 081991128706 |
| Fabricant | Eureka Chemical |
7. Garantia i Suport
For specific warranty information or technical support regarding the Eureka Chemical AS11 Fluid Film, please contact Eureka Chemical directly. Contact details can typically be found on the product packaging or the manufacturer's official weblloc.
Fabricant: Eureka Chemical
Weblloc: Visit the Eureka Store on Amazon (per a informació general del producte)
