1. Introducció
This manual provides essential information for the proper handling, installation, operation, and maintenance of the SKF 6202-2RSH/C3 Deep-Groove Ball Bearing. Adhering to these instructions will help ensure optimal performance and extend the service life of the bearing. This bearing is designed for a wide range of industrial and mechanical applications requiring reliable rotational support.
2. Producte acabatview
The SKF 6202-2RSH/C3 is a single-row deep-groove ball bearing, featuring seals on both sides (2RS1) for protection against contaminants and retention of lubricant. It is constructed from bearing steel and comes pre-lubricated with grease. The C3 radial internal clearance group indicates a clearance greater than normal, suitable for applications where thermal expansion or misalignment may occur.
- Tipus de rodament: Deep-Groove Ball Bearing
- Nombre de files: 1
- Segellat: 2RS1 (Seal on both sides)
- Radial Internal Clearance: C3 (Greater than normal)
- Material del rodament: Bearing steel (Alloy Steel)
- Lubricant: Grease (Pre-lubricated)
- Tipus de forat: Cilíndric
Figure 2.1: An image showing the SKF 6202-2RSH/C3 deep-groove ball bearing, highlighting its sealed design and standard appearance.
3. Especificacions
Detailed technical specifications for the SKF 6202-2RSH/C3 bearing are provided below:
| Atribut | Valor |
|---|---|
| Marca | SKF |
| Número de model | 6202-2RSH/C3 |
| Número de rodament | 6202 2RS1 |
| Material | Acer d'aliatge |
| Bore/Inside Diameter | 15 mm |
| Diàmetre exterior | 35 mm |
| Width/Thickness | 11 mm |
| Tolerance Group | Normal (PN) |
| Radial Internal Clearance | C3 |
| Tipus de segellat | Contact (2RS1) |
| Lubricant compatible | Greix |
| Especificació Met | ABEC 1 |
| Pes de l'article | 0.05 quilograms (1.62 unces) |
| Dimensions del producte (L x A x A) | 1.38 x 1.38 x 0.43 polzades |
4. Configuració i instal·lació
Proper installation is crucial for the longevity and performance of the bearing. Incorrect installation can lead to premature failure.
- Preparació: Ensure the shaft and housing seats are clean, free from burrs, and within specified tolerances. A clean working environment is essential to prevent contamination.
- Mètode de muntatge:
- Cold Mounting: For small bearings, press fitting can be used. Apply pressure only to the ring being fitted (inner ring for shaft, outer ring for housing) to avoid damaging the bearing. Use a mounting tool that distributes pressure evenly.
- Hot Mounting: For larger bearings or when interference fits are tight, heating the bearing can facilitate installation. Use an induction heater or oil bath to heat the bearing evenly to a maximum of 120°C (248°F). Do not exceed this temperature to avoid damaging the seals and lubricant.
- Alineació: Ensure the bearing is correctly aligned during installation to prevent uneven load distribution and premature wear.
- Lubricació: This bearing is pre-lubricated with grease and sealed on both sides (2RS1), meaning it is generally maintenance-free regarding lubrication for its intended service life. Do not attempt to re-lubricate unless specifically instructed by SKF for a particular application, as this can damage the seals.
- Inspecció: After installation, manually rotate the shaft to check for smooth operation and any unusual resistance or noise.
5. Instruccions de funcionament
The SKF 6202-2RSH/C3 bearing is designed for reliable operation under specified conditions. Adhere to the following general guidelines:
- Capacitat de càrrega: Do not exceed the dynamic and static load ratings specified by SKF for this bearing. Overloading can lead to fatigue and premature failure.
- Límits de velocitat: Operate within the recommended speed limits. Exceeding these limits can cause excessive heat generation and lubricant degradation.
- Interval de temperatura: Ensure the operating temperature remains within the limits specified for the bearing's grease and seal material. High temperatures can degrade lubricant and seals.
- Vibració i xoc: While deep-groove ball bearings can accommodate some vibration and shock loads, excessive levels should be avoided as they can reduce bearing life.
- Condicions ambientals: Protect the bearing from harsh environments, including excessive moisture, dust, and corrosive substances, even with its sealed design.
6. Manteniment
The SKF 6202-2RSH/C3 bearing is a sealed unit, designed to be maintenance-free in terms of re-lubrication under normal operating conditions. However, periodic inspection of the surrounding machinery and bearing condition is recommended.
- Inspecció visual: Regularly inspect the bearing's external surfaces and seals for any signs of damage, cracks, or lubricant leakage.
- Noise and Vibration Monitoring: Listen for unusual noises or feel for excessive vibration during operation, which can indicate impending bearing failure.
- Monitorització de la temperatura: Monitor the operating temperature. An unexpected increase in temperature can be a sign of issues.
- Neteja: Keep the area around the bearing clean to prevent contaminants from entering, especially if seals become compromised.
- Substitució: Replace the bearing if significant wear, damage, or performance degradation is observed. Do not attempt to repair damaged sealed bearings.
7. Solució De Problemes
This section outlines common issues that may arise with ball bearings and potential causes. For complex issues, consult a qualified technician or SKF technical support.
| Símptoma | Causa possible | Acció |
|---|---|---|
| Soroll excessiu | Contamination, improper installation, insufficient lubrication (unlikely for sealed bearing unless seals are damaged), bearing damage, misalignment. | Inspect for contamination or damage. Verify proper installation and alignment. Replace if damaged. |
| Sobreescalfament | Excessive speed, over-lubrication (unlikely for sealed bearing), insufficient clearance, misalignment, excessive load, damaged seals. | Check operating conditions (speed, load). Verify clearance and alignment. Inspect seals for damage. |
| Fallada prematura | Improper installation, overloading, contamination, material fatigue, corrosion. | Review installation procedures. Ensure operating within load limits. Maintain clean environment. Replace bearing. |
| Vibració | Unbalance, misalignment, loose fits, bearing damage, worn components. | Check for balance and alignment of rotating parts. Inspect bearing and associated components for wear or damage. |
8. Informació de seguretat
Always observe general safety precautions when handling and installing bearings:
- Utilitzeu l'equip de protecció individual (EPI) adequat, incloent-hi ulleres i guants de seguretat.
- Use correct tools for installation and removal to prevent injury and bearing damage.
- Never apply direct impact to the bearing races or rolling elements.
- Be cautious when handling heated bearings to avoid burns.
- Ensure machinery is de-energized and locked out before performing any installation or maintenance.
- Dispose of used bearings and lubricants according to local environmental regulations.
9. Garantia i assistència
For information regarding the warranty of your SKF 6202-2RSH/C3 Deep-Groove Ball Bearing, please refer to the official SKF warranty policy provided with your purchase or visit the official SKF website. SKF provides comprehensive technical support and resources for its products.
For further assistance or to contact SKF support, please visit the official SKF weblloc web o consulteu la informació de contacte que es proporciona a l'embalatge del producte.
També podeu visitar el SKF Store on Amazon per obtenir més informació sobre el producte i recursos.
