Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your Schellenberg Maxi 11500 Roller Shutter Winder. Designed for durability and ease of use, this winder is an essential component for your roller shutter system. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.
Instruccions de seguretat
- Always disconnect power to the roller shutter system if applicable before beginning installation or maintenance.
- Durant la instal·lació, utilitzeu l'equip de protecció individual adequat, com ara guants i ulleres de protecció.
- Ensure all components are securely fastened according to the instructions to prevent accidents.
- Mantingueu els nens i les mascotes allunyats de la zona de treball durant la instal·lació.
- Si no esteu segurs de cap pas, consulteu un professional qualificat.
Producte acabatview
The Schellenberg Maxi 11500 Roller Shutter Winder is a robust and durable component designed for roller shutter systems. It features a strong winding mechanism and comes with a matching cover plate for a clean finish. It is specifically designed for 23 mm wide straps and can handle roller shutters up to 2.5 meters in height with a maximum strap length of 12 meters.
Configuració i instal·lació
The winder is designed for installation in a suitable wall box. The installation depth is variable, allowing the spring roller to be adjusted up to 4 cm if needed.
Eines necessàries:
- Tornavís
- Cinta mètrica
- Drill (if creating a new wall box)
- Nivell
Passos d'instal·lació:
- Prepareu la caixa de paret: Ensure the wall box is clean and free of debris. The winder requires an opening gap of 260 mm.
- Insert the Winder: Carefully insert the winder mechanism into the wall box.
- Adjust Installation Depth: The spring roller can be moved up to 4 cm to adjust the installation depth between 175 mm and 215 mm. Position the winder to align with the roller shutter strap.
- Enganxeu la corretja: Feed the 23 mm wide roller shutter strap through the winder's opening and securely attach it to the winding mechanism. Ensure the strap is taut and properly aligned.
- Secure the Winder: Use the provided screws to firmly attach the winder to the wall box. Ensure it is level and stable.
- Install the Cover Plate: Place the matching white cover plate over the installed winder and secure it with the remaining screws.
Instruccions de funcionament
The Schellenberg Maxi 11500 Roller Shutter Winder operates manually to raise and lower your roller shutters.
- To Lower the Roller Shutter: Gently pull the strap downwards. The winder will smoothly release the strap, allowing the roller shutter to descend. Control the speed of descent by maintaining a steady pull.
- To Raise the Roller Shutter: Pull the strap upwards with a consistent motion. The winder will retract the strap, raising the roller shutter. Continue pulling until the desired height is reached.
- Stopping at Desired Height: The winder's internal mechanism will hold the roller shutter at any position when the strap is released.
Manteniment
Regular maintenance ensures the longevity and smooth operation of your roller shutter winder.
- Neteja: Periodically wipe the visible parts of the winder and cover plate with a soft, damp tela. Eviteu els netejadors abrasius.
- Inspecció de la corretja: Regularly check the roller shutter strap for any signs of wear, fraying, or damage. A damaged strap should be replaced immediately to prevent malfunction.
- Comprovació del mecanisme: Listen for any unusual noises during operation. If the winder feels stiff or makes grinding sounds, it may require inspection by a professional. Do not attempt to lubricate the internal spring mechanism unless specifically instructed by the manufacturer.
- Estancament del cargol: Occasionally check that all mounting screws are tight. Loose screws can affect the winder's stability and performance.
Resolució de problemes
This section addresses common issues you might encounter with your roller shutter winder.
| Problema | Causa possible | Solució |
|---|---|---|
| Winder is stiff or hard to operate. | Accumulated dirt or debris; internal spring issue; strap misalignment. | Clean the visible parts. Check strap alignment. If problem persists, professional inspection may be needed. |
| Strap is frayed or damaged. | Wear and tear; friction against rough edges. | Replace the roller shutter strap immediately. Ensure no sharp edges are present in the strap path. |
| Roller shutter does not stay at desired height. | Winder mechanism worn out; insufficient spring tension. | The winder may need replacement. This issue typically indicates internal wear. |
| Winder makes grinding noises. | Internal component wear or foreign object. | Discontinue use and consult a professional. Do not attempt to open the winder mechanism. |
Especificacions
Technical details for the Schellenberg Maxi 11500 Roller Shutter Winder.
| Característica | Detall |
|---|---|
| Fabricant | Schellenberg |
| Número de model | 11500 |
| Número de part | 11500 |
| Pes de l'article | 984 g |
| Dimensions del producte | 28.8 x 5 x 16.8 cm |
| Size (Opening Distance) | 26 cm |
| Color | Gris |
| Estil | Including Block (Single) |
| Material | Galvanitzat |
| Max. Roller Shutter Height | 2.5 metres |
| Max. Strap Length | 12 metres |
| Strap Width Compatibility | 23 mm |
| Profunditat d'instal·lació | Adjustable between 175 mm and 215 mm |
| Components inclosos | 1 x winder, 1 x cover plate, 2 x screws |
| Piles necessàries | No |
| ASIN | B0067XVCU6 |
| Primera data disponible | 2 de febrer de 2022 |
Garantia i Suport
For warranty information and technical support, please refer to the official Schellenberg weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
Weblloc: www.schellenberg.de
Contacte: Consulteu la secció de contacte del lloc web oficial weblloc web per obtenir detalls de suport regional.
