AEG 4932352463 Professional Box Maxi Mix Drill Bit Set User Manual

Producte acabatview

The AEG 4932352463 Professional Box Maxi Mix Drill Bit Set is an 18-piece collection of straight shank drill bits designed for versatile drilling applications in wood, metal, and stone/masonry. This set is housed in a durable metal case for organized storage and transport.

Figura 1: The AEG Professional Box Maxi Mix Drill Bit Set, showcasing the 18 drill bits neatly arranged within their robust orange metal storage case. The bits are categorized for wood, metal, and masonry, with sizes clearly marked.

Continguts:

• 6 x Masonry Drill Bits: Ø 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
• 6 x HSS-R Metal Drill Bits: Ø 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
• 6 x Wood Drill Bits: Ø 3mm, 4mm, 5mm, 6mm, 8mm, 10mm

Informació de seguretat

Always prioritize safety when using drill bits. Failure to follow safety guidelines can result in injury or damage to property.

• Protecció ocular: Utilitzeu sempre ulleres o ulleres de seguretat per protegir-vos de les deixalles que suren volant.
• Protecció de les mans: Wear appropriate gloves to protect hands from sharp edges and heat.
• Peça de treball segura: Assegureu-vos que el material que es perfora estigui ben fixatamped o subjectat per evitar el moviment.
• Correct Bit Selection: Use the correct drill bit type and size for the material and application.
• Velocitat adequada: Adjust drill speed according to the material and bit size. Lower speeds for larger bits and harder materials.
• Refrigeració: For metal drilling, use cutting fluid to reduce heat and extend bit life.
• Inspeccionar bits: Before each use, inspect drill bits for damage, dullness, or cracks. Do not use damaged bits.
• Eina de desconnectar: Always unplug the power tool before changing drill bits.

Setup and Bit Selection

1. Selecting the Correct Drill Bit:

• Broques de fusta: Feature a pointed tip for accurate positioning and clean holes in wood.
• HSS-R Metal Drill Bits: Designed for drilling in various metals. Use appropriate cutting fluid for optimal performance and longevity.
• Masonry Drill Bits: Equipped with a carbide tip for drilling into brick, concrete, and stone. Use with a hammer drill function if available and appropriate for the material.

2. Installing the Drill Bit:

1. Assegureu-vos que el trepant estigui desendollat ​​o que n'hagi tret la bateria.
2. Obriu el mandril de la broca girant-lo en sentit antihorari.
3. Insert the straight shank of the selected drill bit into the chuck, ensuring it is seated deeply and centrally.
4. Tighten the chuck securely by rotating it clockwise. For keyless chucks, hand-tighten firmly. For keyed chucks, use the chuck key.
5. Verify the bit is firmly held and does not wobble.

Instruccions de funcionament

General Drilling Guidelines:

1. Marcatge: Clearly mark the drilling location on your workpiece.
2. Forat pilot (opcional): For larger holes or harder materials, consider drilling a smaller pilot hole first.
3. Començant el forat: Place the tip of the drill bit on the marked spot. Start the drill at a slow speed to prevent the bit from wandering.
4. Aplicació de pressió: Apply steady, even pressure in line with the drill bit. Avoid excessive force, which can overheat the bit or damage the material.
5. Maintaining Speed: Once the bit has started to cut, increase the speed to the appropriate setting for the material.
6. Neteja de runes: Periodically withdraw the bit slightly to clear chips and debris, especially when drilling deep holes.
7. Finishing the Hole: Reduce pressure as the bit breaks through the material to prevent splintering or sudden jerking.

Specific Material Considerations:

• Fusta: Use wood drill bits. For clean exit holes, place a scrap piece of wood behind your workpiece.
• Metall: Use HSS-R metal drill bits. Apply cutting fluid to reduce friction and heat. Maintain a consistent feed rate.
• Maçoneria: Use masonry drill bits. If your drill has a hammer function, activate it for masonry drilling. Apply firm, consistent pressure.

Manteniment i emmagatzematge

Neteja:

• After each use, clean drill bits to remove debris, dust, and residue. A wire brush can be used for stubborn material.
• For metal bits, wipe off any cutting fluid residue.

Lubrication and Protection:

• Apply a light coat of machine oil or rust preventative to metal drill bits, especially HSS-R bits, to prevent corrosion during storage.

Emmagatzematge:

• Store the drill bits in their original metal case. This protects them from damage, keeps them organized, and prevents them from dulling or rusting prematurely.
• Keep the case in a dry environment to avoid moisture buildup.

Afilat:

Dull drill bits can reduce efficiency and increase the risk of breakage. While sharpening services are available, for optimal performance, consider replacing bits that show significant wear or damage.

Resolució de problemes

Especificacions

• Marca: AEG
• Número de model: 4932352463
• Tipus de producte: Professional Box Maxi Mix Drill Bit Set
• Nombre de peces: 18
• Tipus de mànec: Recte
• Materials: Metal (HSS-R), Carbide (Masonry), Steel (Wood)
• Material de la caixa: Metall
• Dimensions (L x A x A): 6.1 x 4.41 x 1.57 inches (approximate, for the case)
• Pes de l'article: 1.36 pounds (approximate, for the set)
• Continguts:
  • 6 x Masonry Drill Bits (Ø 3, 4, 5, 6, 8, 10 mm)
  • 6 x HSS-R Metal Drill Bits (Ø 3, 4, 5, 6, 8, 10 mm)
  • 6 x Wood Drill Bits (Ø 3, 4, 5, 6, 8, 10 mm)

Garantia i Suport

For specific warranty information regarding your AEG drill bit set, please refer to the documentation provided at the time of purchase or visit the official AEG website. Drill bits are consumable items, and their lifespan depends on usage and material. General wear and tear are not typically covered under warranty.

For technical support or inquiries, please contact AEG customer service through their official channels. Contact information can usually be found on the product packaging or the manufacturer's weblloc.

Fabricant: AEG

Número de peça: 4932352463