Kerbl P100 Willow Pump Instruction Manual

Introducció

This manual provides detailed instructions for the safe and efficient operation, installation, and maintenance of your Kerbl P100 Willow Pump. The P100 is a robust pasture pump designed to provide fresh and clean water for animals, drawing water from depths of up to 8 meters. Its design features an aluminum lever and smooth-mounted pivot points for extremely smooth operation, and a sturdy cast iron drinking bowl.

Instruccions de seguretat

Please read all safety instructions carefully before installing or operating the pump. Failure to follow these instructions may result in injury or damage to the product.

• Ensure the pump is installed on a stable, level surface to prevent tipping.
• Mantingueu les mans i la roba solta allunyades de les peces mòbils durant el funcionament.
• Do not allow children or untrained individuals to operate the pump.
• Regularly inspect the pump for any signs of wear or damage. Do not operate if damaged.
• Ensure proper connection of all pipes and hoses to prevent leaks.

Components acabatsview

The Kerbl P100 Willow Pump consists of several key components designed for durability and efficient water delivery.

Figura 1: Explotat view of the Kerbl P100 Willow Pump, illustrating the various components and their arrangement for assembly and maintenance.

Figure 2: Internal mechanism of the Kerbl P100 Willow Pump, highlighting the lever, piston, and valve system responsible for water suction and delivery.

Components clau:

• Cos de la bomba: The main housing, typically made of cast iron, containing the pumping mechanism.
• Lever Arm: The aluminum handle used to operate the pump, providing leverage for water extraction.
• Piston/Diaphragm: Internal component responsible for creating suction and pushing water.
• Vàlvules: Inlet and outlet valves that control water flow direction.
• Drinking Bowl: The cast iron basin where water collects for animals to drink.
• Port de connexió: For attaching the suction pipe (3/4 inch connection).

Configuració i instal·lació

Proper installation is crucial for the optimal performance and longevity of your Kerbl P100 Willow Pump.

Selecció del lloc:

• Choose a firm, level, and stable surface for installation, preferably concrete or a reinforced base.
• Ensure the location is easily accessible for animals and for maintenance.
• The water source (well, pond, etc.) should be within 8 meters vertical depth from the pump's location.

Muntatge de la bomba:

1. Position the pump on the chosen surface.
2. Mark the drilling points using the pump's base holes. The hole spacing for mounting is 425 x 260 mm.
3. Drill appropriate holes for anchor bolts (not supplied).
4. Securely fasten the pump to the surface using suitable anchor bolts.

Connexió de les línies d'aigua:

1. Connect a suction pipe to the pump's inlet port. The pump is suitable for pipe and hose connections with an inner diameter of 19-25 mm (3/4 to 1 inch).
2. Ensure all connections are airtight to prevent loss of prime. Use appropriate sealants or thread tape.
3. Extend the suction pipe into the water source, ensuring the end is submerged but not resting on the bottom to avoid drawing sediment.

Figure 3: Dimensional drawing of the Kerbl P100 Willow Pump, showing overall dimensions and mounting hole spacing for installation planning.

Instruccions de funcionament

The Kerbl P100 Willow Pump is designed for simple and effective operation.

Cebada de la bomba:

Before first use or if the pump loses its prime, it may need to be primed:

1. Locate the priming port (if available) or the top opening of the pump.
2. Pour clean water into the pump until the chamber is full.
3. Operate the lever arm slowly several times to help draw water up the suction pipe.
4. Repeat if necessary until water flows consistently from the drinking bowl.

Funcionament normal:

1. Ensure the drinking bowl is clear of debris.
2. Grasp the lever arm firmly.
3. Pump the lever arm up and down with a steady, full stroke.
4. Each stroke delivers approximately 0.6 liters of water (depending on suction depth).
5. Continue pumping until the desired amount of fresh water is in the drinking bowl.

Figure 4: The Kerbl P100 Willow Pump, illustrating its robust design and ready state for manual water pumping.

Manteniment

Regular maintenance ensures the longevity and efficient performance of your pump.

Daily/Weekly Maintenance:

• Clean Drinking Bowl: Regularly clean the cast iron drinking bowl to prevent algae growth and ensure fresh water for animals.
• Comproveu si hi ha fuites: Inspect all connections for any signs of water leaks. Tighten connections as needed.
• Neteja els residus: Ensure the suction pipe inlet is free from debris that could block water flow.

Monthly/Seasonal Maintenance:

• Lubricació: Apply a suitable, food-grade lubricant to the pivot points of the lever arm to ensure smooth operation and prevent wear.
• Inspect Internal Components: Periodically check the piston/diaphragm and valves for wear or damage. Replace if necessary. Refer to the exploded view diagrama per a la identificació de components.
• Hivernització (si escau): In freezing climates, drain the pump completely to prevent damage from ice expansion. Disconnect the suction pipe and allow all water to escape.

Resolució de problemes

This section addresses common issues you might encounter with your Kerbl P100 Willow Pump.

Especificacions

Garantia i Suport

For warranty information, technical support, or to order replacement parts, please contact KERBL customer service or your authorized dealer. Keep your purchase receipt as proof of purchase.

Fabricant: Albert Kerbl GmbH

For further assistance, please visit the official KERBL weblloc web o consulteu el vostre distribuïdor local.