Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Viper Responder 350 2-Way Security System, model 3305V. This advanced system offers robust vehicle security, keyless entry, and convenient 2-way paging capabilities to keep you informed about your vehicle's status.
Informació important de seguretat
- Llegiu atentament totes les instruccions abans de la instal·lació i l'ús.
- Professional installation is highly recommended for this product. Improper installation can lead to vehicle damage or system malfunction.
- Do not attempt to service the unit beyond what is described in this manual. Refer all servicing to qualified personnel.
- Keep the remote controls away from children.
- Ensure your vehicle is in a safe, parked position before activating or deactivating the security system.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació.
- Viper Responder 350 Control Module (Brain Unit)
- 2-Way LCD Remote Control
- Comandament a distància de 1 vies
- Arnès de cablejat
- Sensor de xoc
- Sirena
- Interruptor de valet
- Indicador LED
- Manual d'usuari (aquest document)

Imatge: Més deview of the Viper Responder 350 2-Way Security System components, showing the main 2-way LCD remote, the 1-way remote, and the product packaging.
Configuració i instal·lació
The Viper Responder 350 2-Way Security System requires professional installation. This section provides a general overview of the components and their typical placement. For detailed wiring diagrams and vehicle-specific instructions, consult a certified Viper installer.
Control Module Placement
The main control module (brain unit) should be securely mounted inside the vehicle's cabin, typically under the dashboard, away from direct moisture and excessive heat. Ensure it is not easily accessible to unauthorized individuals.
Siren Installation
Mount the siren in the engine compartment, facing downwards to prevent water accumulation. Choose a location that is difficult to access from outside the vehicle and away from moving parts or extreme heat.
Ajust del sensor de xoc
The shock sensor detects impacts to the vehicle. It should be mounted securely to a solid surface within the vehicle's interior. The sensitivity can be adjusted to prevent false alarms while ensuring adequate protection. Refer to the installer's guide for specific adjustment procedures.
Instal·lació de la bateria del control remot
The 2-Way LCD Remote Control requires 2 AAA batteries.

Image: The Viper Responder 350 2-Way LCD Remote Control, featuring a screen for status updates and multiple control buttons.

Image: The Viper Responder 350 1-Way Remote Control, a compact remote with four buttons for basic system functions.
Instruccions de funcionament
This section details the basic functions of your Viper Responder 350 security system using the remote controls.
Armar el sistema
To arm the security system and lock your vehicle's doors, press the Bloqueig button on your remote control. The siren will chirp once, and the parking lights will flash once. The 2-way remote will confirm the armed status.
Desarmant el sistema
To disarm the security system and unlock your vehicle's doors, press the Desbloqueja button on your remote control. The siren will chirp twice, and the parking lights will flash twice. The 2-way remote will confirm the disarmed status.
Silent Arming/Disarming
To arm or disarm the system silently, press the Bloqueig or Desbloqueja button followed immediately by the Funció button (often labeled with a speaker or mute icon). The system will arm/disarm without siren chirps.
Alliberament del maleter
To open your vehicle's trunk (if connected), press and hold the Alliberament del maleter button (often labeled with a trunk icon) for approximately 3 seconds.
Mode de pànic
To activate the panic alarm, press and hold the Pànic button (often labeled with a siren icon) for 3 seconds. The siren will sound, and the parking lights will flash. To deactivate, press any button on the remote.
Mode valet
Valet mode temporarily bypasses the security features of the system, allowing your vehicle to be serviced without triggering the alarm.
- Gireu la clau de contacte a la posició ON.
- Within 10 seconds, press and release the Valet switch. The LED will turn on solid.
- To exit Valet mode, repeat steps 1 and 2. The LED will turn off.
Manteniment
Substitució de la bateria del comandament a distància
When the 2-way LCD remote's battery indicator shows low power, replace the two AAA batteries. For the 1-way remote, replace the CR2032 coin cell battery when the range decreases significantly or the LED indicator dims.
Neteja del sistema
Keep the control module and sensors free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners directly on electronic components.
Comprovacions periòdiques
Periodically test the system's functions, including arming, disarming, shock sensor, and siren, to ensure proper operation.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| System does not arm/disarm. | Dead remote battery; Out of range; Valet mode active. | Replace remote battery; Move closer to vehicle; Exit Valet mode. |
| Alarm triggers without apparent reason. | Shock sensor too sensitive; Faulty sensor; Loose wiring. | Adjust shock sensor sensitivity; Contact installer for diagnosis. |
| 2-way remote not receiving feedback. | Out of range; Remote battery low; Interference. | Move closer to vehicle; Replace remote battery; Avoid strong signal interference. |
Especificacions
- Model: 3305 V
- Dimensions del producte: 4 x 8 x 6 polzades
- Pes de l'article: 1.79 lliures
- Dispositius compatibles: Cotxes, camions
- Interval màxim: 1320 peus (aproximadament 402 metres)
- Noise Level (Siren): 70 dB
- Bateries de control remot: 2 AAA batteries (for 2-way remote), CR2032 (for 1-way remote)
- Característiques: Vehicle Security w/ 2-way Paging, Keyless Entry, Shock Sensor, Starter Kill, Trunk Release, Domelight Supervision, 6 Tone Siren, Programmable Outputs
Garantia i Suport
For warranty information and technical support, please contact your authorized Viper dealer or visit the official Directed Electronics weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.
Fabricant: Viper (a brand of Directed Electronics)
Weblloc: www.directed.com





