Okin 2 button (up/down) DC Lift Chair or Power Recliner Hand Control User Manual

Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Okin 2-Button DC Lift Chair or Power Recliner Hand Control. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

Producte acabatview

The Okin 2-Button Hand Control is designed for use with DC lift chairs and power recliners, providing simple and intuitive control over the chair's movement. It features two buttons for 'Up' and 'Down' functions, allowing users to adjust their chair to the desired position.

Okin 2-Button Hand Control with coiled cord and 5-pin connector

Figure 1: Okin 2-Button Hand Control. This image shows the black hand control unit with two white oval buttons (one for up, one for down) and a coiled cord leading to a 5-pin circular connector.

This hand control is compatible with various brands including Okin, Limoss, Action, Berkline, Comfort Chair, Golden, LazyBoy, Med-Lift, Mega Motion, and Pride chair motors.

Configuració i instal·lació

Before installation, ensure your lift chair or power recliner is unplugged from the power outlet to prevent accidental operation or electrical shock.

Identifica el connector: Locate the existing hand control cable connected to your chair's motor or control box. The Okin 2-button hand control typically uses a 5-pin straight connector.

Figure 2: Detail of the 5-pin straight connector. This image highlights the circular 5-pin male connector on the hand control cable, with an inset showing the corresponding female port with five pin receptacles.

Disconnect Old Control (if applicable): Carefully unplug the old hand control from the chair's motor or control box. Note the orientation of the connector if it's not keyed.
Connecta un nou control: Align the 5-pin connector of the new Okin hand control with the corresponding port on your chair's motor or control box. Gently push the connector in until it is firmly seated. Ensure the connection is secure.
Assegureu el cable: Route the cable in a way that it will not be pinched or tangled during chair operation.
Restaura l'alimentació: Once the hand control is securely connected, plug your lift chair or power recliner back into the power outlet.

If you encounter difficulty, consult your chair's original manual or a qualified technician.

Instruccions de funcionament

The Okin 2-Button Hand Control provides simple operation for your lift chair or power recliner.

"Up" Button: Press and hold the "Up" button (typically the top button) to raise the chair's footrest and/or recline the backrest, or to lift the chair to a standing assist position. Release the button to stop movement.
"Down" Button: Press and hold the "Down" button (typically the bottom button) to lower the chair's footrest and/or bring the backrest upright, or to lower the chair from a standing assist position back to a seated position. Release the button to stop movement.

Always ensure the area around the chair is clear before operating to prevent obstructions or injury.

Manteniment i cura

Proper care will extend the life of your hand control.

Neteja: Wipe the hand control with a clean, damp cloth. Do not use abrasive cleaners or immerse the control in water.
Gestió de cables: Avoid kinking, pinching, or excessive pulling on the cable. Ensure it is not caught in moving parts of the chair.
Emmagatzematge: When not in use for extended periods, store the hand control in a dry place away from direct sunlight and extreme temperatures.
Inspecció: Periodically inspect the cable and connector for any signs of wear, fraying, or damage. If damage is observed, discontinue use and replace the control.

Resolució de problemes

If your hand control is not functioning as expected, try the following troubleshooting steps:

Problema	Causa possible	Solució
Chair does not move when buttons are pressed.	Chair not plugged in. Connexió fluixa. Potència outage. Damaged hand control or cable. Motor or power supply issue.	Ensure chair is securely plugged into a working outlet. Check all cable connections, including the hand control to the motor/control box. Verify power to the outlet. Inspect the hand control and cable for visible damage. Replace if damaged. If other steps fail, the issue may be with the chair's motor or power supply. Consult a qualified technician.
Chair moves intermittently.	Connexió fluixa. Frayed or damaged cable. Faulty button.	Comproveu i assegureu totes les connexions. Inspect the cable for damage. Replace the hand control if the cable is frayed. If one button works and the other doesn't, the button may be faulty. Replace the hand control.

For issues not resolved by these steps, contact the manufacturer or a certified repair service.

Especificacions

Marca: Okin
Número de model: 8541831861
Color: Negre
Tipus de connector: 5-pin straight connector
Pes de l'article: 7.4 unces
Dimensions del paquet: 8.15 x 2.6 x 2.6 polzades
Compatibilitat: Designed for DC lift chairs and power recliners; compatible with Okin, Limoss, Action, Berkline, Comfort Chair, Golden, LazyBoy, Med-Lift, Mega Motion, Pride, and other brands chair motors.

Garantia i Suport

For information regarding warranty coverage or technical support, please refer to the documentation provided with your original purchase or contact Okin customer service directly. Contact details can typically be found on the manufacturer's official weblloc web o a través del vostre distribuïdor de productes.

Per a més ajuda, podeu visitar el Botiga Okin a Amazon.

	Instruccions de muntatge per a la cadira reclinable elevable elèctrica YB2213 Guia de muntatge pas a pas per a la cadira reclinable amb elevació elèctrica YB2213, que inclou el contingut del paquet, els passos de connexió i les instruccions de cablejat per a l'alimentació i els comandaments a distància. Compta amb funcions de calor i massatge.
	Guia de resolució de problemes de sistemes Okin: Reparació i manteniment de la cadira elevadora Guia completa de resolució de problemes per als sistemes Okin utilitzats en cadires elevadores. Apreneu a diagnosticar i solucionar problemes comuns amb controls manuals, transformadors, motors i femelles de l'eix. Inclou consells d'instal·lació.
	Guia de substitució del comandament a distància OKIN HSW306 de 5 pins a 7 pins Instruccions pas a pas per substituir un comandament a distància de reclinable OKIN HSW306 de 5 pins per un model de 7 pins, incloent-hi el bypass de cablejat, els passos d'instal·lació i els accessoris recomanats.
	Sistemes de seients OKIN: components per a mobles de moviment Catàleg complet dels sistemes de seients OKIN, que inclou mecanismes reclinables manuals i elèctrics, mecatrònica, cadires elevadores, cadires relaxants, reposacaps, suports lumbars, actuadors, comandaments a distància, interruptors i accessoris per a mobles amb moviment.
	Manual d'instruccions del sistema de control remot OKIN Refined Electric Technology Aquest manual proporciona instruccions de funcionament detallades per al sistema de control remot OKIN Refined Electric Technology, que cobreix descripcions dels botons, configuracions de posició especials i procediments d'emparellament sense fil.
	Manual d'usuari del sistema de control remot OKIN RF.31.24.01 Manual d'usuari complet per al sistema de control remot de 22 tecles OKIN RF.31.24.01, que detalla les funcions dels botons, els procediments d'ajust de la posició i els components del sistema per a llits ajustables.

Okin 8541831861

Okin 2-Button DC Lift Chair / Power Recliner Hand Control User Manual