Manual d'usuari del tancament de seguretat electrificat ADAMS RITE 4300 ELTACH

Producte acabatview

The Adams Rite 4300 ELTACH Electrified Deadlatch is engineered for seamless integration with access control systems, providing enhanced security for narrow stile aluminum entrance doors. This non-handed, electrified deadlatch offers a modern solution for upgrading existing mechanical MS deadlocks and deadlatches without requiring extensive modifications.

It is designed to be a direct, no-cut, no-drilling replacement for mechanical MS deadlocks and deadlatches, fitting standard Adams Rite MS prepped aluminum entrance doors. This design significantly reduces installation time and cost.

Característiques clau

Electrified Operation: Integrates with access control systems for enhanced security.
Easy Retrofit: No-cut, no-drilling replacement for mechanical MS deadlocks and deadlatches.
Compatibilitat: Works with standard Adams Rite MS prepped aluminum entrance doors and existing Adams Rite trim (levers and paddles).
Compliment de l'ADA: Provides ADA and Single Motion to Egress code compliance when paired with Adams Rite lever or paddle trim.
Non-Handed: Simplifies installation and inventory management.
Versatilitat de potència: Field selectable for 12, 16, or 24 VDC power sources (16 VDC requires adapter P/N VA 7400-16VDC).
Connexió fàcil: Equipped with a quick connect plug-in type connector.
Optional Monitoring: Available with form "C" latch status monitoring.

Configuració i instal·lació

The Adams Rite 4300 ELTACH is designed for straightforward installation, particularly as a retrofit solution.

Preparació: Ensure the door is a standard narrow stile aluminum entrance door with an existing MS preparation. No additional cutting or drilling is typically required for the deadlatch body itself.
Selecció de la font d'alimentació: Determine the appropriate power source (12, 16, or 24 VDC). If using 16 VDC, ensure the P/N VA 7400-16VDC adapter is available and connected. The deadlatch is field selectable to match the power source.
Cablejat: Utilize the quick connect plug-in type connector for easy and secure electrical connection to your access control system. Refer to your access control system's wiring diagram for specific connections.
Muntatge: Insert the 4300 ELTACH into the MS prepped door stile. Secure it using the provided fasteners.
Instal·lació del cilindre: Install a standard mortise cylinder from either or both sides as required for your application.
Instal·lació de retalls: Attach existing or new Adams Rite trim (levers or paddles) to the door, ensuring proper alignment and function with the deadlatch.
Prova: After installation, thoroughly test the deadlatch's mechanical and electrical functions, including locking, unlocking, and integration with the access control system.

Image: The Adams Rite 4300 ELTACH Electrified Deadlatch unit, showing its main body, latch bolt, and deadbolt mechanism. This view highlights the compact design suitable for narrow stile applications.

Instruccions de funcionament

The 4300 ELTACH operates in conjunction with an access control system and a standard mortise cylinder.

Access Control Operation: When an authorized signal is received from the access control system, the deadlatch will retract, allowing the door to be opened.
Operació clau: The deadlatch can be mechanically operated using a standard mortise cylinder key from either side, depending on the cylinder configuration. Turning the key will retract the latch bolt.
Lever/Paddle Trim Operation: When paired with Adams Rite lever or paddle trim, the deadlatch can be retracted by depressing the lever or paddle, providing single motion egress.
Automatic Relocking: Upon door closure, the deadlatch will automatically extend and secure the door.

Manteniment

Regular maintenance ensures the longevity and reliable operation of your Adams Rite 4300 ELTACH Electrified Deadlatch.

Neteja: Periodically wipe down the exposed surfaces of the deadlatch and associated trim with a soft, damp drap. Eviteu productes de neteja abrasius o dissolvents que puguin danyar l'acabat.
Lubricació: Lightly lubricate moving parts, such as the latch bolt and cylinder mechanism, with a silicone-based lubricant or dry graphite powder annually. Do not use oil-based lubricants as they can attract dirt.
Comprovació de fixació: Annually inspect all mounting screws and fasteners to ensure they are tight. Loose fasteners can affect the deadlatch's alignment and operation.
Connexions elèctriques: If accessible and safe to do so, periodically check the quick connect plug-in for secure connection. Ensure no wires are frayed or damaged.
Prova de funcionalitat: Regularly test the deadlatch's operation with both the access control system and the key to ensure smooth and consistent performance.

Resolució de problemes

Problema	Causa possible	Solució
Deadlatch does not retract electrically.	Sense energia a la unitat. Vol incorrectetagConfiguració. Faulty wiring/connection. Access control system issue.	Verify power supply to the deadlatch. Check the field selectable voltage setting matches the power source. Inspect quick connect plug-in and wiring for damage or loose connections. Consult access control system manual or technician.
Key operation is stiff or difficult.	Falta de lubricació. Misaligned cylinder. Damaged cylinder.	Apply dry graphite or silicone lubricant to the cylinder. Check cylinder alignment and re-seat if necessary. Replace the mortise cylinder.
Deadlatch does not extend fully or secure the door.	Obstruction in the door frame/strike. Misalignment of the deadlatch. Damaged internal mechanism.	Clear any debris from the strike plate area. Check deadlatch alignment within the door stile. Contact a qualified locksmith or Adams Rite support.

Especificacions

Atribut	Detall
Marca	Adams Rite
Model	4300 ELTACH (Part No. 4300-20-202-313)
Enrere	31/32" (for Radius Mortised Strike)
Voltage	Field selectable 12, 16, or 24 VDC (16 VDC requires adapter P/N VA 7400-16VDC)
Entrega	Sense mà
Material	Metall
Color	Bronze
Dimensions (L x A x A)	9 x 2 x 2.3 polzades
Tipus de bloqueig	Combination Lock (Electrified Deadlatch)
Mètode de control	Aplicació (Note: This refers to integration with access control systems often managed via app, not a direct app for the deadlatch itself.)
UPC	888512101039
Fabricant	ASSA ABLOY

Garantia i Suport

For specific warranty information regarding your Adams Rite 4300 ELTACH Electrified Deadlatch, please refer to the documentation provided with your purchase or visit the official Adams Rite (an ASSA ABLOY company) weblloc. Els termes de la garantia solen cobrir els defectes de fabricació.

For technical support, installation assistance, or service inquiries, please contact Adams Rite customer service directly. Contact information can usually be found on the manufacturer's official weblloc o embalatge del producte.

Note: Protection plans offered by third-party retailers are separate from the manufacturer's warranty.

	Adams Rite 3090 eForce-150 Entrada sense clau: característiques, especificacions i comandes Informació detallada sobre el control d'entrada sense clau que funciona amb bateria Adams Rite 3090 eForce-150, incloent-hi les característiques, els dispositius de bloqueig compatibles, les dimensions, els acabats i la guia de comandes. Ideal per a portes comercials i institucionals.
	Guia d'instal·lació i usuari del sistema d'entrada sense clau eForce 150 Model 3090 Comprehensive installation instructions and user guide for the Adams Rite eForce 150 Keyless Entry Model 3090. Learn about setup, programming, user codes, battery replacement, and troubleshooting for this advanced security device.
	Tancadors elèctrics Adams Rite UltraLine sèrie 7400: especificacions i guia d'instal·lació Dades tècniques completes, característiques, especificacions elèctriques i informació de comanda per als tancaments elèctrics Adams Rite UltraLine sèrie 7400, compatibles amb els pestells i panys cilíndrics Adams Rite.
	Manual de peces Adams Rite i garantia limitada This document is a parts manual and limited warranty statement for Adams Rite door hardware, including deadlocks, deadlatches, exit devices, electric strikes, and trim components. It details product part numbers, descriptions, pricing, and warranty terms.
	Pany d'entrada sense clau Adams Rite 3090 eForce-150: característiques, especificacions i instal·lació Més detallatview del control d'entrada sense clau que funciona amb bateria Adams Rite 3090 eForce-150 per a portes comercials. Coneix les seves característiques, carcassa, funció, funcionament, dimensions, instal·lació i opcions de comanda.
	Dispositius de sortida de vora Adams Rite sèries 3700 i 8700 - BHMA tipus 1 Informació detallada sobre els dispositius de sortida de vora Adams Rite sèrie 3700 (resistents al foc) i sèrie 8700 (de seguretat vital). Característiques, dimensions, certificacions, acabats, opcions de guarnició i accessoris per a portes de fusta i acer buit.

Adams Rite 4300 ELTACH