Salter Labs 350 Cc Bubble Humidifier Instruction Manual

Producte acabatview

The Salter Labs 350 Cc Bubble Humidifier is designed to provide humidification for oxygen therapy. It features 360-degree rectangular diffuser ports for quiet operation and low system back pressure. The dome lid design ensures high performance and rugged durability. These disposable humidifiers are intended for single-patient use, offering dependable and cost-effective performance.

Característiques principals:

• 360° molded, low resistance, high output diffuser head design
• Connecting tower design
• Large, quad wing nut connector
• Easy seal, translucent, double helix thread jar
• Jar permanently etched with large print minimum/maximum water level markings

Image: Salter Labs 350 Cc Bubble Humidifier, showing the assembled unit with its clear jar and black dome lid.

Instruccions de configuració

Desembalatge

Carefully remove the humidifier from its packaging. Inspect all components for any signs of damage. Do not use if any part is damaged.

Omplint l'humidificador

1. Unscrew the dome lid from the clear jar by turning it counter-clockwise.
2. Fill the jar with distilled water up to the maximum fill line indicated on the jar. Do not overfill.
3. Re-attach the dome lid securely by turning it clockwise until a tight seal is achieved.

Instruccions de funcionament

Connecting to Oxygen Source

1. Connect the humidifier to your oxygen concentrator or flowmeter using the appropriate oxygen tubing.
2. Ensure all connections are secure to prevent any air or water leaks.

Monitoring Water Level

Regularly check the water level in the humidifier jar. Refill with distilled water as needed, ensuring it remains between the minimum and maximum fill lines to maintain proper humidification and prevent damage.

Ajust del cabal

Adjust the oxygen flow rate according to your healthcare provider's instructions. The humidifier is designed for quiet operation with low system back pressure, ensuring efficient humidification at prescribed flow rates.

Manteniment

Neteja diària

1. Disconnect the humidifier from the oxygen source.
2. Disassemble the lid and jar.
3. Wash both parts with warm, soapy water.
4. Esbandiu bé amb aigua neta.
5. Allow to air dry completely before reassembly.

Disinfection (Weekly)

For weekly disinfection, soak the disassembled parts in a solution of one part white vinegar to three parts water for 30 minutes. Rinse thoroughly with sterile water and allow to air dry completely before reassembly.

Substitució

This is a disposable humidifier designed for single-patient use. Replace the humidifier according to your healthcare provider's recommendations or if it shows signs of wear or damage, such as cracks or persistent leaks.

Resolució de problemes

No Bubbling or Low Humidification

• Comprovar el nivell d'aigua: Ensure the water level is between the minimum and maximum fill lines.
• Comproveu les connexions: Verify all tubing connections are secure and there are no leaks.
• Inspect Diffuser: Ensure the diffuser ports are not clogged. Clean if necessary following maintenance instructions.

Soroll excessiu

• Comprovar el nivell d'aigua: Overfilling the jar can cause excessive noise. Adjust water level if needed.
• Inspeccionar per danys: Check the lid and jar for cracks or damage that might affect the seal.

Fuga d'aigua

• Tighten Lid: Ensure the dome lid is securely tightened onto the jar.
• Comproveu si hi ha esquerdes: Inspect the jar and lid for any cracks or damage. Replace the unit if damaged.

Especificacions

Garantia i Suport

For warranty information or technical support regarding your Salter Labs 350 Cc Bubble Humidifier, please contact Salter Labs directly. Refer to the product packaging or the official Salter Labs weblloc web per obtenir les dades de contacte i els termes de garantia més actualitzats.

Fabricant: Laboratoris Salter