Introducció
This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Danfoss RMT-230 Electromechanical Room Thermostat. This device is designed to regulate ambient temperature in conjunction with heating, ventilation, or air conditioning systems.
The RMT-230 is suitable for installations equipped with oil or gas boilers, as well as electric heating systems. It features a temperature adjustment range of 8 to 30°C, which can be limited to a specific maximum or minimum setting if desired. The thermostat operates with a 10(4) A changeover contact.
Configuració i instal·lació
Proper installation is crucial for the optimal performance of your Danfoss RMT-230 thermostat. It is recommended that installation be performed by a qualified professional.
1. Triar una ubicació
- Install the thermostat on an inside wall, approximately 1.5 meters (5 feet) above the floor.
- Eviteu llocs propers a fonts de calor (per exemple, llum solar directa,amps, radiators, televisions) or cold drafts (e.g., windows, doors).
- Ensure good air circulation around the thermostat for accurate temperature sensing.
2. Muntatge
The thermostat comes with a mounting bracket and back plate for secure installation.
- Turn off the main power supply to the heating system before beginning installation.
- Separate the front cover from the back plate.
- Mount the back plate securely to the wall using appropriate screws and wall plugs.
- Connect the electrical wiring to the terminals on the back plate according to the wiring diagram provided with the product (refer to local electrical codes). The thermostat operates on 230 Volts.
- Reattach the front cover to the back plate, ensuring it clicks securely into place.
- Restablir el subministrament elèctric al sistema de calefacció.
Instruccions de funcionament
The Danfoss RMT-230 thermostat is simple to operate using its rotary dial.
Configuració de la temperatura
- Per ajustar la temperatura ambient desitjada, gireu el selector central en sentit horari per augmentar la temperatura o en sentit antihorari per disminuir-la.
- The dial is marked with temperature values ranging from 8°C to 30°C.
- The thermostat will activate the heating system when the room temperature falls below your set point and deactivate it when the temperature rises above it.
Temperature Range Limitation (Optional)
The temperature adjustment range can be physically limited to a specific maximum or minimum. Refer to the detailed installation guide provided with the product for instructions on how to set these limits, if required.
Manteniment
The Danfoss RMT-230 thermostat requires minimal maintenance to ensure long-term, reliable operation.
- Neteja: Periodically wipe the exterior of the thermostat with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the device.
- Vendes d'aire: Ensure that the air vents on the thermostat casing remain clear of dust and debris to allow for accurate temperature sensing.
- No hi ha peces reparables per l'usuari: No hi ha peces que l'usuari pugui reparar dins del termòstat. No intenteu obrir ni reparar la unitat vosaltres mateixos.
Resolució de problemes
If you experience issues with your Danfoss RMT-230 thermostat, refer to the following common troubleshooting steps:
| Problema | Causa possible | Solució |
|---|---|---|
| El sistema de calefacció no respon. | No power to the thermostat or heating system. Thermostat setting is below room temperature. Cablejat incorrecte. | Check main power supply and circuit breaker. Augmenteu l'ajust de temperatura al dial. Verifiqueu les connexions del cablejat (consulteu un professional si no esteu segurs). |
| Room temperature is inaccurate. | Termòstat situat a prop d'una font de calor o corrent d'aire. Les sortides d'aire estan bloquejades. | Relocate the thermostat if possible, or ensure no obstructions. Clean any dust or debris from the air vents. |
| Thermostat clicks but heating doesn't turn on/off. | Issue with the heating system itself (boiler, pump, etc.). Faulty thermostat contact. | Consult a heating system technician. Contact Danfoss support or a qualified electrician for thermostat inspection. |
If the problem persists after attempting these solutions, please contact Danfoss customer support or a qualified heating technician.
Especificacions
| Característica | Detall |
|---|---|
| Marca | Danfoss |
| Número de model | RMT-230 (087N1110) |
| Dimensions del producte (L x A x A) | 8 x 8 x 3.99 cm |
| Pes de l'article | 120 grams |
| Voltage | 230 Volts |
| Interval de temperatura | 8 a 30 °C |
| Tipus de contacte | Changeover contact 10(4) A |
| Tipus de controlador | Electromecànica |
| Font d'alimentació | Elèctric amb cable |
| Components inclosos | Mounting bracket, back plate |
Garantia i Suport
For information regarding warranty coverage, technical support, or spare parts availability for your Danfoss RMT-230 thermostat, please refer to the documentation provided with your purchase or visit the official Danfoss website. You may also contact your local Danfoss distributor or the seller from whom you purchased the product.
Conserveu el vostre comprovant de compra per a reclamacions de garantia.
