1. Producte acabatview
The BIOS Weather Indoor/Outdoor Digital Suction Cup Thermometer provides convenient temperature monitoring for both indoor and outdoor environments. Its unique 'see-through' design allows for easy placement on windows, displaying current, minimum, and maximum temperatures on a large LCD readout. This weatherproof device is designed for clear readability and simple operation.
Imatge 1.1: Frontal view of the BIOS Weather Digital Suction Cup Thermometer displaying temperature readings.
2. Contingut del paquet
- 1 x BIOS Weather Digital Suction Cup Thermometer
- 1 x Included Battery (typically a button cell, check compartment for type)
3. Característiques del producte
- Measures and displays temperatures for indoor or outdoor use.
- Attaches to any interior or exterior window via suction cup.
- Jumbo LCD readout displays current temperature.
- Records and displays the most recent minimum and maximum temperatures.
- Unique 'see-through' display design.
- Weatherproof construction.
- Switchable temperature units: Fahrenheit (°F) or Celsius (°C).
Imatge 3.1: Anglesa view of the thermometer, showing the display with maximum and minimum temperature indicators.
4. Configuració
4.1 Instal·lació de la bateria
The thermometer requires one button cell battery (included). A protective tab may be present to prevent battery drain during storage.
- Carefully remove the top part (the 'roof' of the house-shaped unit) to access the battery compartment.
- If present, pull out the plastic insulating tab from the battery compartment.
- Ensure the battery is correctly seated with the positive (+) side facing up.
- Replace the top part of the unit, ensuring it clicks securely into place.
4.2 Mounting the Thermometer
The thermometer is designed to attach to a window using its integrated suction cup.
- Clean the desired window surface thoroughly to ensure it is free of dust, dirt, and grease. A clean, smooth surface is crucial for optimal suction.
- Lightly moisten the suction cup for better adhesion.
- Press the thermometer firmly against the clean window surface, ensuring the suction cup creates a strong seal.
- Verify that the thermometer is securely attached and will not fall.
Image 4.1: The thermometer mounted on a window, demonstrating its 'see-through' feature.
5. Instruccions de funcionament
5.1 Encès/Apagat
The thermometer typically powers on automatically once the battery is installed and the protective tab is removed. There is no manual on/off switch.
5.2 Visualització de la temperatura
The large LCD screen will continuously display the current temperature. It also shows the maximum (MAX) and minimum (MIN) temperatures recorded since the last reset.
5.3 Switching Temperature Units (°F/°C)
To switch between Fahrenheit (°F) and Celsius (°C), locate the °F/°C button inside the battery compartment (under the 'roof' of the unit). Press this button to toggle between the two units.
5.4 Min/Max Temperature Readings
The thermometer automatically records the highest (MAX) and lowest (MIN) temperatures. These readings typically reset automatically at specific times (e.g., midnight for MIN, morning for MAX) or can be manually reset by pressing a dedicated button, usually located within the battery compartment. Consult the specific markings near the buttons for 'RESET' or 'MIN/MAX CLEAR' functions.
6. Manteniment
- Neteja: Netegeu el termòmetre amb un toc suau, damp cloth. Do not use abrasive cleaners or solvents. Ensure the unit is dry before re-mounting.
- Substitució de la bateria: When the display becomes dim or unreadable, it is time to replace the battery. Follow the battery installation steps (Section 4.1) to replace the old battery with a new one of the same type. Dispose of old batteries responsibly.
- Cura de la ventosa: If the suction cup loses its grip, clean both the suction cup and the window surface thoroughly. A small amount of petroleum jelly on the rim of the suction cup can sometimes improve adhesion.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla està en blanc o tènue | Dead or low battery; protective tab still in place. | Replace the battery; ensure the protective tab is removed. |
| Lectures de temperatura inexactes | Direct sunlight exposure; proximity to heat/cold sources (e.g., window frame, appliance); sensor obstruction. | Relocate the thermometer to a shaded area or away from direct heat/cold sources. Ensure the sensor is clear. |
| La ventosa no s'enganxa | Dirty window surface; dirty or dry suction cup; extreme temperature changes. | Clean the window and suction cup thoroughly. Lightly moisten the suction cup before re-applying. Avoid mounting on frosted or textured glass. |
| Digits are jumbled or incomplete | Bateria baixa; mal funcionament intern. | Replace the battery. If the issue persists, the unit may require replacement. |
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | 314 aC |
| Dimensions (L x A x A) | 4.25-Inch x 5.7-Inch x 0.9-Inch (approx. 10.8 cm x 14.5 cm x 2.3 cm) |
| Pes | 70 g |
| Tipus de visualització | LCD |
| Font d'alimentació | Battery Powered (button cell, included) |
| Material | Plàstic, vidre |
| Característiques especials | Weatherproof, Min/Max Temperature Display, °F/°C Switchable |
| Color | Blanc |
9. Garantia i Suport
Specific manufacturer warranty details for the BIOS Weather Indoor/Outdoor Digital Suction Cup Thermometer are not provided in the product information. For warranty inquiries, technical support, or replacement parts, please contact the retailer where the product was purchased or refer to the official BIOS Weather weblloc web per obtenir informació de contacte del servei d'atenció al client.
Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.
