SIEMENS SIMATIC HMI TP700 Comfort Panel (6AV2124-0GC01-0AX0) Instruction Manual

Introducció

This manual provides essential information for the installation, operation, and maintenance of the SIEMENS SIMATIC HMI TP700 Comfort Panel. The TP700 Comfort Panel is a human-machine interface designed for industrial automation applications, featuring a 7-inch widescreen TFT display with touch operation capabilities.

The device offers a PROFINET interface, an MPI/PROFIBUS DP interface, and 12 MB of configuration memory. It operates on Windows CE 6.0 and is configurable using WinCC Comfort V11 or higher.

Imatge: Frontal view of the SIEMENS SIMATIC HMI TP700 Comfort Panel, showcasing its 7-inch widescreen display.

Configuració

1. Desembalatge i inspecció

Carefully unpack the SIMATIC HMI TP700 Comfort Panel. Inspect the device for any signs of damage during transit. Ensure all components listed in the packing slip are present. The package typically includes the device only.

2. Instal·lació física

The panel is designed for panel mounting. Consider the product dimensions of approximately 12.2 x 9.06 x 9.06 inches and a weight of 4.14 pounds for proper enclosure selection and mounting. The device features IP65 protection with stainless steel panels, making it suitable for various industrial environments. Touch versions can be installed in an upright orientation.

3. Connexions elèctriques

Connect the power supply to the device. The required operating voltage is 19.2 Volts. Ensure the power source meets the specified voltage and current requirements to prevent damage to the unit.

4. Interface Connections

Connect the HMI to your industrial network using the PROFINET interface. For other communication needs, utilize the MPI/PROFIBUS DP interface. Refer to the network topology and cabling guidelines for your specific system.

5. Configuració

The SIMATIC HMI TP700 Comfort Panel is configurable from WinCC Comfort V11 or higher. Install the appropriate software on your engineering station and follow the software's instructions to create and download your HMI project to the panel.

En funcionament

1. Encès

Once properly installed and connected, apply power to the HMI. The device will boot up, displaying the Windows CE 6.0 operating system and then loading the configured HMI project.

2. Touch Operation

The TP700 Comfort Panel features capacitive multitouch displays, allowing for intuitive operation through touch gestures. Interact with on-screen elements such as buttons, input fields, and navigation controls by touching the display.

3. Característiques de la pantalla

The 7-inch widescreen TFT display supports 16 million colors, providing clear and vibrant visualization of process data and control elements. The widescreen format offers a larger visualization area, enhancing operational overview.

Manteniment

1. Neteja de la pantalla

To maintain optimal touch functionality and display clarity, regularly clean the screen. Use a soft, lint-free cloth dampened with a mild, non-abrasive cleaning solution specifically designed for electronic displays. Avoid excessive moisture and harsh chemicals.

2. Consideracions ambientals

The device is designed with IP65 protection, indicating resistance to dust ingress and low-pressure water jets. However, ensure that the operating environment remains within the specified temperature and humidity ranges to prolong the lifespan of the HMI.

3. Actualitzacions de programari

Periodically check for software updates for WinCC Comfort and the HMI firmware from the official SIEMENS support channels. Keeping the software up-to-date ensures optimal performance, security, and access to new features.

Resolució de problemes

1. Sense poder

• Verify that the power cable is securely connected to both the HMI and the power source.
• Check the power supply for proper voltage output (19.2 Volts).
• Inspect fuses or circuit breakers in the power circuit.

2. Problemes de visualització

• If the screen is blank, ensure the HMI is powered on and the backlight is functioning.
• If the display is distorted or flickering, check for electromagnetic interference or faulty connections.

3. Touchscreen Unresponsive

• Clean the display surface to remove any dirt or debris that might interfere with touch detection.
• Restart the HMI.
• If the issue persists, recalibration or a firmware update might be necessary. Consult the WinCC Comfort documentation.

4. Errors de comunicació

• Verify network cable connections for PROFINET or MPI/PROFIBUS DP.
• Check network settings and IP addresses in the HMI configuration and the connected PLC.
• Ensure the HMI project is correctly downloaded and running.

For complex issues not resolved by these steps, refer to the detailed documentation provided with WinCC Comfort or contact SIEMENS technical support.

Especificacions

Garantia

Specific warranty terms and conditions for the SIEMENS SIMATIC HMI TP700 Comfort Panel are provided by SIEMENS or the authorized seller at the time of purchase. Please refer to your purchase documentation or contact your supplier for detailed warranty information, including coverage period and claims procedures.

Suport

For technical assistance, product inquiries, or service requests related to your SIEMENS SIMATIC HMI TP700 Comfort Panel, please contact SIEMENS customer support directly. You can find contact information and additional resources on the official SIEMENS website. Ensure you have your product model (ST801) and part number (6AV2124-0GC01-0AX0) available when seeking support.

Official SIEMENS Weblloc: www.siemens.com