1. Introducció
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Ccei 2x300W Power Supply Unit, model PIMT 37 Piccolo. Please read this manual thoroughly before installation and use, and keep it for future reference. This unit is designed to provide a 12V TBTS (Very Low Safety Voltage) power supply for two 300W projectors.
2. Instruccions de seguretat
Always adhere to the following safety precautions to prevent injury or damage to the unit and connected equipment:
- Seguretat elèctrica: Always disconnect the main power supply before performing any installation, maintenance, or cleaning procedures. Ensure proper grounding of the unit.
- Voltage Compatibilitat: The unit operates on a 230V/50Hz input. Ensure your electrical supply matches these requirements.
- Output Usage: This power supply is specifically designed for 12V TBTS projectors with a maximum load of 2x300W. Do not connect other types of equipment or exceed the specified power rating.
- Integritat del recinte: Do not open the unit's enclosure unless explicitly instructed by Ccei technical support. There are no user-serviceable parts inside.
- Environmental Protection (IP67): The unit has an IP67 protection rating, meaning it is protected against dust ingress and the effects of temporary immersion in water (up to 1 meter for 30 minutes). However, ensure all cable glands and connections are properly sealed during installation to maintain this rating. Avoid prolonged immersion or high-pressure water jets.
- Ventilació: Ensure adequate air circulation around the unit. Do not block ventilation openings.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- 1 x Ccei PIMT 37 Piccolo Power Supply Unit
- 1 x manual d'instruccions
4. Configuració i instal·lació
Seguiu aquests passos per a una instal·lació correcta:
- Lloc de muntatge: Select a suitable, stable, and dry location for mounting the power supply unit. Consider proximity to the projectors and the main power source. Ensure the mounting surface can support the unit's weight (2.2 kg).
- Connexió d'alimentació principal: Connect the 230V/50Hz main power supply to the designated input terminals on the unit. Ensure the connection is secure and complies with local electrical codes. Use appropriate cable glands to maintain the IP67 rating.
- Projector Connections: Connect the 12V TBTS output cables from the power supply unit to your two 300W projectors. Pay close attention to polarity (+/-) as indicated on the unit and your projectors. Ensure all connections are tight and sealed to prevent water ingress.
- Comprovació final: Before applying power, double-check all connections for security and correct wiring.
Image 1: Ccei PIMT 37 Piccolo Power Supply Unit. This image shows the compact design of the power supply unit, highlighting its robust casing suitable for outdoor or demanding environments. The input and output terminals are visible, along with the single ON/OFF switch.
5. Instruccions de funcionament
The Ccei PIMT 37 Piccolo features a simple operation:
- Encès: Once all connections are secure and verified, flip the single ON/OFF switch located on the unit to the 'ON' position. The connected projectors should receive power and activate according to their own operational sequence.
- Apagar: To turn off the projectors, flip the ON/OFF switch to the 'OFF' position. This will cut power to both connected projectors.
6. Manteniment
Regular maintenance ensures the longevity and optimal performance of your power supply unit:
- Neteja: Periodically clean the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the casing o segells.
- Inspecció: Regularly inspect all cables and connections for any signs of wear, damage, or corrosion. Ensure cable glands remain tight and sealed.
- Emmagatzematge: If the unit is to be stored for an extended period, disconnect it from the power supply and store it in a dry, cool, and protected environment, away from direct sunlight and extreme temperatures.
7. Solució De Problemes
If you encounter issues with your Ccei PIMT 37 Piccolo, refer to the following troubleshooting guide:
| Problema | Causa possible | Solució |
|---|---|---|
| No power to projectors | Main power supply disconnected or off Unit's ON/OFF switch is off Connexions soltes o defectuoses | Check the main power source and circuit breaker. Assegureu-vos que l'interruptor ON/OFF estigui a la posició 'ON'. Verify all input and output cable connections are secure. |
| Only one projector working | Faulty connection to the non-working projector Faulty projector | Check the 12V TBTS connection to the affected projector. Ensure correct polarity. Test the projector with another known working power source if possible. |
| Unit appears damaged or overheating | Sobrecàrrega Falla interna Factors ambientals | Disconnect power immediately. Ensure total projector wattage does not exceed 2x300W. Contact Ccei technical support. |
If the problem persists after attempting these solutions, contact Ccei technical support or your retailer for assistance.
8. Especificacions
- Model: PIMT 37 Piccolo
- Fabricant: Ccei
- Entrada Voltage: 230 V AC
- Freqüència d'entrada: 50 Hz
- Vol. De sortidatage: 12 V TBTS (Very Low Safety Voltage)
- Potència de sortida: For 2 projectors, up to 300 W each (Total 600 W)
- Transformador de seguretat: Complies with NF EN61558 standard
- Classe de protecció: IP 67 (Dust tight and protected against temporary immersion in water)
- Pes: 2.2 kg
- Dimensions (L x A x P): Aproximadament 175 mm x 125 mm x 150 mm (6.9 polzades x 4.9 polzades x 5.9 polzades)
- Control: 1 Interruptor ON/OFF
9. Garantia i Suport
For detailed warranty information, technical support, or service inquiries, please contact your authorized Ccei retailer or visit the official Ccei weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
