Fastrax FAST2000 Fully Automatic Tyre Truer User Manual

1. Introducció

This manual provides comprehensive instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your Fastrax FAST2000 Fully Automatic Tyre Truer. This device is designed for precision tyre truing for R/C cars, accommodating scales from 1/12th to 1/8th. It features a pre-installed cutting blade, simple controls, and robust construction.

2. Informació de seguretat

Please read all safety warnings and instructions before operating the device to prevent injury or damage. Keep this manual for future reference.

• Font d'alimentació: The FAST2000 requires a 12V power source. Ensure the power supply is stable and correctly connected before operation.
• Parts mòbils: The device contains moving parts and a sharp cutting blade. Keep hands, hair, loose clothing, and other objects clear of the cutting area during operation.
• Funda protectora: Always ensure the plexiglass protective cover is properly in place before and during operation to minimize exposure to the cutting blade.
• Protecció de fusibles: The unit is fuse overload protected. If the device stops functioning unexpectedly, check the fuse.
• Ventilació: Utilitzeu el dispositiu en una zona ben ventilada.
• Nens i animals de companyia: Keep the device out of reach of children and pets. This product is not a toy.
• Neteja: Desconnecteu l'alimentació abans de netejar o realitzar qualsevol manteniment.

3. Producte acabatview

The Fastrax FAST2000 is a compact and robust tyre truing machine. Below is an image illustrating its main components and controls.

Descripció de la imatge: This image displays the Fastrax FAST2000 Fully Automatic Tyre Truer. The device is black with a blue transparent protective cover over the cutting mechanism. On the left side, there is a control panel with a 12V power switch, 'REV OFF ON' switch, and several buttons labeled 'REVERSE CUTTER', 'HOME', 'CUTTER CONTROL STOP CUTTER', 'FORWARD CUTTER', and 'AUTO MODE'. A dial for adjustment is visible on the front right.

Components clau:

• 12V Power Switch: Controla l'alimentació principal de la unitat.
• REV OFF ON Switch: Controls the direction of the tyre rotation.
• Botons de control:
• REVERSE CUTTER: Moves the cutting blade in reverse.
• INICI: Returns the cutting blade to its home position.
• CUTTER CONTROL STOP CUTTER: Stops the cutting blade movement.
• FORWARD CUTTER: Moves the cutting blade forward.
• MODE AUTOMÀTIC: Initiates the automatic truing process.
• Dial d'ajust: Used to set the truing diameter.
• Plexiglass Cover: Transparent cover for safety and visibility of the cutting area.
• Mecanisme de tall: Houses the pre-installed cutting blade and tyre mounting area.

4. Configuració

Follow these steps to set up your Fastrax FAST2000:

1. Desembalatge: Carefully remove the tyre truer from its packaging. Inspect the unit for any signs of damage during transit.
2. Col·locació: Place the unit on a stable, flat, and clean surface. Ensure there is adequate space around the device for safe operation and ventilation.
3. Connexió d'alimentació: Connect a suitable 12V DC power source (not included) to the 12V power input port on the unit. Ensure the power switch is in the 'OFF' position before connecting.
4. Comprovació inicial: With the power connected, switch the 12V power to 'ON'. The unit should power up. Do not insert a tyre yet.

5. Instruccions de funcionament

The FAST2000 offers both manual and automatic operation modes.

5.1. Preparing for Truing:

1. Assegureu-vos que la unitat estigui encès.
2. Mount the R/C car wheel and tyre assembly securely onto the truing arbor.
3. Adjust the truing diameter using the adjustment dial. The device supports truing diameters between 35mm and 80mm. Rotate the dial until the desired diameter is set.
4. Ensure the plexiglass protective cover is closed.

5.2. Automatic Truing Mode:

For a fully automated truing process:

1. After preparing the tyre as described above, press the 'AUTO MODE' button.
2. The device will automatically engage the cutting blade, rotate the tyre, and perform the truing operation according to the set diameter.
3. The process will stop automatically once complete.

5.3. Control manual:

For precise manual control over the cutting process:

1. Use the 'REV OFF ON' switch to control the direction of tyre rotation (Reverse or Forward).
2. Use the 'FORWARD CUTTER' and 'REVERSE CUTTER' buttons to manually move the cutting blade.
3. Press the 'CUTTER CONTROL STOP CUTTER' button to halt the blade movement at any time.
4. The 'HOME' button will return the cutting blade to its starting position.

6. Manteniment

Regular maintenance ensures the longevity and optimal performance of your FAST2000.

• Neteja: After each use, disconnect the power and use a soft brush or compressed air to remove rubber dust and debris from the cutting area and internal mechanisms. Do not use liquid cleaners directly on electronic components.
• Inspecció de la fulla: Periodically inspect the cutting blade for sharpness and damage. A dull blade can lead to poor truing results and increased motor strain. Replacement blades are available from authorized Fastrax dealers.
• Lubricació: Lightly lubricate moving parts, such as the cutter guide rails, with a suitable light machine oil as needed to ensure smooth operation.
• Emmagatzematge: When not in use, store the unit in a clean, dry environment, away from direct sunlight and extreme temperatures.

7. Solució De Problemes

If you encounter issues with your FAST2000, refer to the following common problems and solutions:

8. Especificacions

• Model: FAST2000
• Requisit d'energia: 12V DC (external power source required)
• Adjustable Truing Diameter: 35 mm - 80 mm
• Construcció: Heavy Duty Aluminium Casing and CNC Base
• Funda protectora: Plexiglass
• Característiques de seguretat: Fuse Overload Protected
• Dimensions: Aproximadament 21 x 31 x 11 cm (llargada x amplada x alçada)
• Pes: Aproximadament 2.1 kg

9. Garantia i Suport

Specific warranty details for the Fastrax FAST2000 are not provided in this manual. Please refer to your purchase documentation or contact your retailer for warranty information.

For technical support or inquiries regarding replacement parts, please contact Fastrax customer service or your authorized dealer.