Macurco CM-6-CH / CM-12 Carbon Monoxide CO Calibration Hood User Manual

1. Introducció

This user manual provides essential information for the safe and effective use of the Macurco CM-6-CH Carbon Monoxide (CO) Calibration Hood, designed for use with Macurco CM-6 and CM-12 fixed gas detectors. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper functionality and safety.

2. Informació de seguretat

IMPORTANT: Before use, read and follow the user instructions inside the box. Failure to do so may result in improper operation, inaccurate readings, or personal injury.

Always ensure the calibration hood is used in a well-ventilated area.
Do not paint the device, as this may interfere with its operation or sensor accuracy.
Handle with care to avoid damage to the hood or the detector.
Refer to the specific instructions for your Macurco CM-6 or CM-12 detector for detailed calibration procedures.

3. Producte acabatview

The Macurco CM-6-CH is a specialized calibration hood designed to facilitate the accurate calibration of Macurco CM-6 and CM-12 Carbon Monoxide fixed gas detectors. It ensures a controlled environment for applying calibration gas to the sensor, optimizing the detector's performance and accuracy.

Macurco CM-6-CH Carbon Monoxide Calibration Hood product box, front view

Figura 3.1: Frontal view of the Macurco CM-6-CH product packaging, showing the product name, brand, and key specifications for the CM-12 detector.

Close-up of Macurco CM-12 detector diagram and specifications on product box

Figura 3.2: Detallada view of the Macurco CM-12 detector diagram and technical specifications printed on the product box, including power, range, color, temperature, and certifications.

4. Configuració

The CM-6-CH calibration hood is designed for easy attachment to compatible Macurco CO detectors. Follow these general steps for setup:

Ensure your Macurco CM-6 or CM-12 detector is properly installed and powered.
Carefully align the CM-6-CH calibration hood with the sensor area of the detector.
Securely attach the hood to create a sealed environment around the sensor. Refer to your detector's manual for specific attachment points or methods.
Connect the calibration gas cylinder to the inlet port on the calibration hood.

5. Operating the Calibration Hood

The calibration hood facilitates the application of a known concentration of CO gas to the detector's sensor for accurate calibration. Always follow the calibration procedure outlined in your Macurco CM-6 or CM-12 detector's specific user manual.

General Calibration Steps:

With the calibration hood securely attached and the calibration gas connected, initiate the calibration sequence on your Macurco detector.
Open the valve on the calibration gas cylinder to allow the gas to flow into the hood and over the sensor.
Monitor the detector's display and indicators as per its manual until the calibration process is complete.
Once calibration is confirmed, close the gas cylinder valve and remove the calibration hood.

The detector is designed to operate within a temperature range of 0 to 35°C (32 to 95°F) and a CO detection range of 0-200 PPM. Ensure your calibration environment adheres to these specifications for optimal results.

6. Manteniment

The CM-6-CH calibration hood requires minimal maintenance. Keep it clean and free from obstructions to ensure proper sealing during calibration.

Netegeu l'exterior amb un suau, damp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
Ensure the internal surfaces that contact the detector are clean and free of debris.
Store the calibration hood in a clean, dry place when not in use to prevent damage.
As indicated on the product, do not paint el dispositiu.

7. Solució De Problemes

If you encounter issues during calibration, consider the following:

Error de calibratge: Ensure the calibration hood is securely attached and creating a proper seal. Verify the calibration gas cylinder is not empty and the flow rate is correct.
Lectures inexactes: Check the expiration date of your calibration gas. Ensure the ambient temperature is within the specified operating range for the detector.
Danys físics: Inspect the calibration hood for any cracks or deformities that might prevent a proper seal. Replace if damaged.

For persistent issues, refer to the troubleshooting section of your Macurco CM-6 or CM-12 detector manual or contact Macurco technical support.

8. Especificacions

Característica	Especificació
Número de model	CM-6-CH (for CM-6 / CM-12 detectors)
Marca	Macurco
Pes de l'article	0.96 unces (27.22 g)
UPC	808237728892
Power (CM-12 Detector)	100-240 VAC (50 to 60 Hz)
CO Range (CM-12 Detector)	0-200 ppm
Operating Temperature (CM-12 Detector)	De 0 a 35 °C (de 32 a 95 °F)
Certifications (CM-12 Detector)	UL 2075, UL 61010-1, CSA C22.2 No 61010-1

A dalt view of Macurco CM-6-CH product box showing UPC barcode

Figura 8.1: superior view of the Macurco CM-6-CH product packaging, displaying the UPC barcode (0783748811304) and "Made in the USA" label.

9. Garantia i Suport

For warranty information and technical support regarding your Macurco CM-6-CH calibration hood or compatible detectors, please contact the manufacturer:

Fabricant: Macurco (Manufactured by Aerionics Inc.)

Telèfon: 1-877-367-7891

Weblloc: www.macurco.com

Please have your product model number (CM 6) and any relevant purchase information ready when contacting support.

	Guia de calderes de gas Macurco: Sistemes de seguretat i detecció Una guia completa dels sistemes de detecció de gasos Macurco per a sales de calderes, que cobreix tota la indústriaview, tipus de gasos, selecció d'equips, instal·lació i manteniment de monòxid de carboni i gasos combustibles.
	Controlador de caldera de gas Macurco GBC: Manual d'instal·lació i funcionament Manual complet d'instal·lació i funcionament del controlador de caldera de gas Macurco GBC. Cobreix la seguretat, les característiques, les especificacions, la instal·lació, el cablejat, el funcionament i la programació dels sistemes de detecció de gas.
	Detector de monòxid de carboni Macurco CM-E1: Manual d'instal·lació i funcionament Guia completa per a la instal·lació i el funcionament del detector de monòxid de carboni Macurco CM-E1. Apreneu sobre seguretat, característiques, especificacions, cablejat i resolució de problemes per a una detecció fiable de CO en entorns residencials i d'oficina.
	Macurco CX-6 & CX-12 Series CO/NO2 Detectors User Manual User manual for Macurco CX-6 and CX-12 series Carbon Monoxide (CO) and Nitrogen Dioxide (NO2) detectors, controllers, and transducers. Covers installation, operation, features, and troubleshooting for commercial gas detection systems.
	Instruccions d'ús del detector de refrigerant Macurco RD-12 Instruccions d'ús per al detector, controlador i transductor de refrigerant Macurco RD-12. Apreneu sobre la instal·lació, el funcionament, el manteniment i les funcions de seguretat per a la detecció de gasos refrigerants en aplicacions comercials i industrials.
	Guia de calderes de gas Macurco: Sistemes de seguretat i detecció Guia completa de sistemes de detecció de gasos per a sales de calderes, que cobreix gasos comuns com el monòxid de carboni i el metà, selecció d'equips, instal·lació i manteniment per part de Macurco.

Macurco CM 6