Metra 99-3303

Manual d'instal·lació del suport de ràdio per a vehicles Metra 99-3303

Model: 99-3303

1. Introducció

This manual provides detailed instructions for the proper installation and maintenance of your Metra 99-3303 Vehicle Radio Mount. This product is designed to facilitate the installation of an aftermarket single DIN or double DIN car stereo into specific vehicles, providing a factory-like finish and secure mounting. Please read all instructions carefully before beginning the installation process.

2. Informació de seguretat

  • Always disconnect the vehicle's negative battery terminal before starting any electrical installation to prevent short circuits and damage.
  • Ensure all wiring connections are secure and properly insulated to avoid electrical hazards.
  • Refer to your vehicle's service manual for specific dashboard disassembly and reassembly procedures.
  • If you are unsure about any part of the installation, consult a qualified professional installer.
  • Wear appropriate safety gear, such as gloves and eye protection, during installation.

3. Contingut del paquet

Verify that all components are present before beginning installation. The Metra 99-3303 kit typically includes:

  • Main Dash Bezel / Trim Panel
  • Radio Mounting Brackets (left and right)
  • Wiring Harness Adapter (vehicle-specific)
  • Antenna Adapter (if required for vehicle)
  • Hardware Pack (screws, clips, etc.)
Metra 99-3303 Vehicle Radio Mount Kit components

Figura 1: This image displays the various components typically included in the Metra 99-3303 vehicle radio mount kit. It shows the main dash bezel, side mounting brackets, and a wiring harness adapter, designed to integrate an aftermarket radio into a vehicle's dashboard.

4. Eines necessàries

Generalment es necessiten les eines següents per a la instal·lació:

  • Eina d'eliminació de panells
  • Tornavís Phillips
  • Tornavís de cap pla
  • Wire Strippers/Crimpers
  • Cinta elèctrica o tub termoretràctil
  • Small Socket Set (optional, depending on vehicle)

5. Configuració i instal·lació

Follow these general steps for installing the Metra 99-3303 radio mount. Specific vehicle disassembly steps may vary.

  1. Preparació del vehicle: Disconnect the negative battery terminal of your vehicle.
  2. Dashboard Disassembly: Carefully remove the factory dash trim panels and any necessary components to access the factory radio. Use a panel removal tool to avoid scratching surfaces.
  3. Eliminació de la ràdio de fàbrica: Unbolt and remove the factory radio from the dashboard. Disconnect all wiring harnesses and the antenna cable from the back of the radio.
  4. Mount Assembly (to Aftermarket Radio): Attach the Metra mounting brackets to your new aftermarket radio using the screws provided with the radio or the Metra kit. Ensure the radio is centered and flush with the front of the brackets.
  5. Connexions de cablejat: Connect the Metra wiring harness adapter to your aftermarket radio's wiring harness. Match wire colors (e.g., yellow to yellow for constant power, red to red for accessory power, black to black for ground). Solder or crimp connections for reliability and insulate them properly. Connect the antenna adapter if needed.
  6. Install Radio and Mount: Slide the assembled aftermarket radio and Metra mount into the vehicle's dash opening. Secure the mount using the factory mounting points or hardware provided.
  7. Prova de connexions: Before reassembling the dash, reconnect the vehicle's negative battery terminal. Turn on the vehicle and test the aftermarket radio's functionality (power, audio, balance, fader, radio reception, etc.).
  8. Dashboard Reassembly: Once all functions are verified, disconnect the battery again. Reinstall all removed dash panels and components in reverse order of removal. Reconnect the battery.

6. Funcionament

The Metra 99-3303 is a passive mounting solution. Its primary function is to securely house your aftermarket car stereo within the vehicle's dashboard, providing a stable and aesthetically integrated platform. Once installed, the operation of your car audio system will be governed by the features and controls of your aftermarket radio itself. The mount ensures that the radio is held firmly in place and that the dash retains a factory-like appearance.

7. Manteniment

The Metra 99-3303 radio mount requires minimal maintenance:

  • Periodically inspect the mounting screws and connections to ensure they remain tight and secure.
  • Clean the visible surfaces of the dash kit with a soft, damp tela. Eviteu productes químics durs que puguin danyar l'acabat.
  • If any part of the mount becomes loose or damaged, address it promptly to prevent rattling or potential damage to the radio.

8. Solució De Problemes

Most issues related to an aftermarket radio installation are typically electrical or related to the radio unit itself. However, if you encounter problems that might be related to the mount:

  • Loose Fit/Rattling: Ensure all mounting screws are tightened. Verify that the radio is properly seated within the mounting brackets and that the dash bezel is securely clipped into place.
  • Gaps Around Radio: Double-check that the radio is pushed fully into the mount and that the dash bezel is correctly aligned and snapped into the dashboard.
  • La ràdio no s'encén: While often a wiring issue, ensure the radio is fully seated and making proper contact with the wiring harness. Re-check all electrical connections.

For electrical or radio-specific issues, refer to your aftermarket radio's instruction manual or consult a professional.

9. Especificacions

  • Marca: Metra
  • Número de model: 99-3303
  • Número de peça del fabricant: BTL5002-KV0586
  • Pes de l'article: 1.5 lliures (aproximadament)
  • Dimensions del paquet: 14.06 x 12.03 x 12.02 polzades (aproximadament)
  • ASIN: B007W7Z8II
  • Compatibilitat: Designed for specific vehicle applications (refer to product packaging or Metra website for exact vehicle fitment).

10. Garantia i Suport

Warranty information for Metra products is typically provided by the manufacturer and may vary. Please refer to the documentation included with your specific product or visit the official Metra website for the most current warranty details and support options. For technical assistance or inquiries regarding your Metra 99-3303 Vehicle Radio Mount, it is recommended to contact Metra customer support directly.

Metra Electronics: www.metraonline.com

Documents relacionats - 99-3303

Preview Guia de sol·licituds de comandes EZ de Metra
Una guia completa de les aplicacions EZ Order de Metra, que detalla la compatibilitat dels vehicles i els números de peça dels productes per a instal·lacions d'àudio per a cotxes. Inclou informació sobre l'aplicació Metra Fit Guide per a iPhone i Android.
Preview Guia d'instal·lació de Metra 99-8220 per a Toyota Tundra i Sequoia (2007-2011)
Instruccions d'instal·lació pas a pas per al kit de quadre de comandament Metra 99-8220, que permeten la instal·lació de ràdio de recanvi en vehicles Toyota Tundra 2007-2011 i Toyota Sequoia 2008-2011. Inclou les característiques del kit, els components i el cablejat.
Preview Kit d'instal·lació Metra 99-6519 per a Dodge Charger/Magnum 2005-2007
Instruccions d'instal·lació detallades per al kit de quadre de comandament Metra 99-6519, que permeten la instal·lació de ràdio single-DIN, ISO-DIN o DDIN en vehicles Dodge Charger i Magnum (2005-2007) sense navegació de fàbrica. Inclou les característiques del kit, els components, les eines necessàries i guies de muntatge pas a pas.
Preview Instruccions d'instal·lació de Metra 99-7804 per a Honda Accord 2013-2017
Guia d'instal·lació detallada per al kit de quadre de comandament Metra 99-7804, que permet la instal·lació d'una ràdio de recanvi en un Honda Accord del 2013 al 2017. Inclou les característiques del kit, els components, el desmuntatge, la preparació, el muntatge, el cablejat i les instruccions per a la pantalla tàctil.
Preview Instruccions d'instal·lació de Metra 99-8164 per a Lexus RX300 (1999-2003)
Guia d'instal·lació de Metra 99-8164 per al Lexus RX300 del 1999 al 2003, que detalla el procés d'instal·lació de sistemes d'àudio per a cotxes del mercat de recanvis, mantenint els controls de clima i proporcionant informació sobre el cablejat.
Preview Instruccions d'instal·lació de Metra 99-8271 per a Toyota 4-Runner (2010-up)
Comprehensive installation instructions for the Metra 99-8271 dash kit, designed for Toyota 4-Runner vehicles from 2010 onwards. Includes kit features, components, disassembly, preparation, and assembly steps for single and double DIN radios.