RCA RCRPS02GR 2-Device Big Button Remote Control

1. Introducció

The RCA 2-Device Big Button Remote Control (Model RCRPS02GZ) is designed for simplified control of your television and one additional device, such as a cable box, satellite receiver, or streaming device. Its large, easy-to-read buttons and backlit keypad enhance usability, especially in low-light conditions. This remote offers convenient features like preset channels for quick access to favorites, a guide function, and an input key for seamless device switching.

Figura 1: Frontal view of the RCA RCRPS02GZ Remote Control, highlighting its large buttons and overall layout.

2. Contingut del paquet

Si us plau, verifiqueu que tots els elements siguin presents al vostre paquet:

• RCA 2-Device Big Button Remote Control (Model RCRPS02GZ)
• Manual d'usuari (aquest document)

Nota: Calen 2 piles AAA per al funcionament i no estan incloses en el paquet. Si us plau, compreu-les per separat.

3. Configuració

3.1 Instal·lació de la bateria

To install batteries in your remote control:

1. Localitzeu la tapa del compartiment de la bateria a la part posterior del comandament a distància.
2. Premeu la pestanya i feu lliscar la coberta cap avall.
3. Insert two (2) new AAA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
4. Feu lliscar la tapa del compartiment de la bateria fins que faci clic de manera segura.

Important: Substitueix sempre les dues piles alhora. No barregis piles velles i noves, ni piles de diferents tipus.

3.2 Programació del comandament a distància

The RCA RCRPS02GZ remote can be programmed to control your TV and one additional device (e.g., SAT/CBL/STREAM). There are typically two methods for programming: Direct Code Entry or Auto Code Search.

For the most accurate and up-to-date programming codes for your specific devices, it is recommended to visit the official RCA Remote Control Code Finder website. A general programming procedure is outlined below:

1. Identify Device: Press and hold the device button you wish to program (e.g., TV or SAT/CBL/STREAM) until the LED indicator light illuminates.
2. Enter Code: While holding the device button, enter the 4-digit programming code for your device's brand. Codes can be found in the remote's original packaging insert or on the RCA weblloc.
3. Botó d'alliberament: Release the device button. The LED indicator should turn off.
4. Prova a distància: Point the remote at your device and test basic functions like Power, Volume, and Channel. If the device responds correctly, programming is complete.
5. Solucionar problemes: If the device does not respond, repeat the process with the next code listed for your brand, or try the Auto Code Search method (refer to RCA's online resources for detailed auto-search instructions).

Figura 2: lateral view of the RCA RCRPS02GZ Remote Control, illustrating its form factor.

4. Instruccions de funcionament

4.1 Funcions dels botons anteriorsview

Familiarize yourself with the functions of each button on your RCA remote control:

4.2 Using Channel Preset Mode

The remote allows you to store up to 10 favorite channels for TV and 10 for SAT/CBL/STREAM. To use this feature:

1. Per emmagatzemar una preconfiguració: Tune to the desired channel. Press and hold the P button, then press one of the number keys (0-9) where you want to store the channel. Release both buttons.
2. To Access a Preset: Premeu el botó P button once to enter Preset Mode. Then, press the number key (0-9) corresponding to your stored channel.
3. To Exit Preset Mode: Premeu el botó P button again to return to direct channel entry mode.

4.3 Guide Function and Input Key

• El GUIA button is designed to bring up the electronic program guide (EPG) on your cable box, satellite receiver, or smart TV, if supported by the device.
• El ENTRADA button allows you to cycle through the various video input sources on your television (e.g., HDMI 1, HDMI 2, AV, Component). This is useful for switching between different connected devices like DVD players, game consoles, or streaming sticks.

5. Manteniment

• Neteja: Per netejar el comandament a distància, netegeu-lo amb un drap suau i lleugerament sec.amp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Substitució de la bateria: Replace batteries when the remote's performance degrades or the LED indicator light does not illuminate. Always use fresh AAA alkaline batteries.
• Emmagatzematge: Si no heu d'utilitzar el comandament a distància durant un període prolongat, traieu-ne les piles per evitar fuites i possibles danys.

6. Solució De Problemes

• El comandament a distància no funciona:
  • Assegureu-vos que les piles AAA noves estiguin instal·lades correctament.
  • Point the remote directly at the device's infrared sensor.
  • Remove any obstructions between the remote and the device.
  • Verify that the correct device mode (TV or SAT/CBL/STREAM) is selected.
• El dispositiu no respon després de la programació:
  • Try another programming code for your device's brand.
  • Perform an Auto Code Search (refer to RCA's online support for instructions).
  • Ensure your device is powered on during programming.
• Alguns botons no funcionen:
  • Not all functions may be supported by every device.
  • Ensure the remote is in the correct device mode for the function you are trying to use.

If you continue to experience issues, please refer to the RCA support weblloc o contacteu amb el servei d'atenció al client.

7. Especificacions

8. Garantia i Suport

RCA products are manufactured to high quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official RCA weblloc.

For technical support, programming assistance, or to find the latest device codes, please visit the RCA support website or contact their customer service department. Contact information can typically be found on the RCA weblloc web o a l'embalatge del producte.

Recursos en línia: www.rcaaudiovideo.com