1. Producte acabatview
The Modine 32161 Horizontal Concentric Venting Kit is designed for use with Modine gas-fired unit heaters. This kit facilitates the proper arrangement of tubing for both exhaust and combustion air intake in a concentric configuration.
Components del producte
- 1 x Concentric Vent Kit Adapter Box
- 1 x Vent Pipe Terminal
- 1 x Combustion Air Pipe Terminal

Image: The Modine 32161 Horizontal Concentric Venting Kit, showing the adapter box, vent pipe terminal, and combustion air pipe terminal.
2. Compatibilitat del producte
This venting kit is compatible with the following Modine gas-fired unit heater models:
- Modine HDS30 Unit Heaters
- Modine HDS45 Unit Heaters
- Modine HDS60 Unit Heaters
- Modine HDS75 Unit Heaters
- Modine HDC60 Unit Heaters
- Modine HDC75 Unit Heaters
- Modine HDC100 Unit Heaters
- Modine HDC125 Unit Heaters
- Modine PTS150 Unit Heaters
- Modine PTS175 Unit Heaters
- Modine PTS200 Unit Heaters
- Modine BTS150 Unit Heaters
- Modine BTS175 Unit Heaters
- Modine BTS200 Unit Heaters
3. Setup and Installation Guidelines
Installation of the Modine 32161 Horizontal Concentric Venting Kit should be performed by a qualified professional in accordance with all local and national building codes, as well as the specific instructions provided with your Modine unit heater.
Consideracions clau per a la instal·lació:
- Requisits de ventilació: Ensure adequate clearance and proper routing for both exhaust gases and fresh air intake.
- Connexions segures: All connections must be sealed and secured to prevent leaks and ensure efficient operation.
- Alineació correcta: The concentric vent kit adapter box must be correctly aligned with the unit heater's venting ports.
- Terminal Placement: Position the vent and combustion air pipe terminals to prevent obstruction and ensure proper airflow.
- Inspecció: After installation, thoroughly inspect all connections and components for proper fit and function.
4. Manteniment
Regular maintenance of your venting system is crucial for safe and efficient operation of your Modine unit heater. Perform visual inspections periodically and address any issues promptly.
Recommended Maintenance Tasks:
- Inspecció visual: Annually inspect the entire venting system for signs of corrosion, damage, or blockages.
- Neteja de terminals: Ensure the vent and combustion air pipe terminals are free from debris, leaves, snow, or insect nests.
- Integritat del segell: Check all seals and connections for any signs of deterioration or leaks.
- Suport estructural: Verify that the venting system is adequately supported and securely fastened.
If any issues are identified, consult a qualified service technician for repair or replacement.
5. Solució De Problemes
This section provides general guidance for common issues related to the venting system. For complex problems or issues with the unit heater itself, refer to the heater's specific manual or contact a qualified technician.
Problemes comuns i solucions:
- Reduced Heater Performance:
Possible causa: Partially blocked vent or air intake.
Solució: Inspect and clear any obstructions from the vent and combustion air pipe terminals. - Olors inusuals:
Possible causa: Exhaust gas leakage.
Solució: Immediately shut down the unit heater. Inspect all vent connections for leaks and ensure they are properly sealed. Contact a professional for repair. - Visible Damage to Venting:
Possible causa: Physical impact or corrosion.
Solució: Do not operate the unit heater if the venting system is visibly damaged. Replace damaged components immediately.
6. Especificacions
| Atribut | Valor |
|---|---|
| Número de model | 32161 |
| Pes de l'article | 4 lliures |
| Fabricant | Modine Parts |
| Primer disponible | 15 de maig de 2012 |
7. Garantia i Suport
For information regarding the warranty of the Modine 32161 Horizontal Concentric Venting Kit, please refer to the documentation provided with your Modine unit heater or contact Modine Manufacturing directly. Modine provides comprehensive support for its products.
For technical assistance, replacement parts, or service inquiries, please visit the official Modine website or contact their customer service department. Always provide your product model number (32161) and any relevant serial numbers when seeking support.





