Nordlux Tin Maxi 21519103 Outdoor Wall Light GU10 Black

1. Introducció

Thank you for choosing the Nordlux Tin Maxi Outdoor Wall Light. This modern and high-quality fixture is designed to provide effective and aesthetic illumination for outdoor spaces such as main entrances, garages, or patios. Featuring a sleek black aluminum finish and two GU10 light sources, it casts light both upwards and downwards, creating a distinctive lighting effect. This model also includes an integrated motion sensor for enhanced functionality and energy efficiency.

Please read this manual thoroughly before installation and use to ensure safe operation and optimal performance of your new wall light. Keep this manual for future reference.

2. Informació de seguretat

Observeu sempre les següents precaucions de seguretat per evitar lesions o danys:

• Seguretat elèctrica: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Ensure the main power supply is switched off at the circuit breaker before commencing any installation, maintenance, or bulb replacement.
• Ús exterior: This product is designed exclusively for outdoor use and has an IP54 protection rating, meaning it is protected against dust ingress and splashing water from any direction. Do not use indoors or in environments exceeding its IP rating.
• Tipus de bombeta: Use only GU10 bulbs as specified. Do not exceed the maximum wattage de 35 watts per bombeta.
• Manipulació: Handle the light fixture with care. Avoid dropping or subjecting it to strong impacts.
• Neteja: Desconnecteu l'alimentació abans de netejar. Feu servir un drap suau i sec.amp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Temperatura: Ensure the light is installed in an area where ambient temperatures are within safe operating limits.

3. Contingut del paquet

Desembaleu la caixa amb cura i assegureu-vos que tots els articles hi siguin presents i no estiguin danyats. Si falta alguna peça o hi ha alguna peça danyada, poseu-vos en contacte amb el vostre distribuïdor immediatament.

• Nordlux Tin Maxi Outdoor Wall Light fixture (1 unit)
• Materials de muntatge (cargols, tacs de paret)
• Manual d'usuari (aquest document)

Note: GU10 bulbs are not included and must be purchased separately.

4. Configuració i instal·lació

Installation should only be carried out by a qualified electrician. Follow these general steps:

1. Preparació per a la instal·lació:
   • Switch off the main power supply to the installation area at the circuit breaker. Verify that the power is off using a voltage provador.
   • Choose a suitable wall location for mounting, ensuring it is a flat surface and allows for proper wiring.
2. Muntar l'aparell:
   • Carefully remove the mounting bracket from the light fixture.
   • Position the mounting bracket on the wall at the desired height and mark the drilling points.
   • Drill holes using an appropriate drill bit for your wall material. Insert wall plugs if necessary.
   • Fixeu el suport de muntatge a la paret amb els cargols proporcionats.
3. Wire the Light:
   • Connect the electrical wires from your power supply to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral, Earth). Refer to the wiring diagram provided with the product packaging if available.
   • Assegureu-vos que totes les connexions estiguin segures i aïllades correctament.
4. Instal·lació de bombetes GU10:
   • Insert two GU10 bulbs (max 35W each, not included) into the lamp holders. Twist to secure them in place.
5. Fixeu el cos del dispositiu:
   • Carefully attach the main body of the light fixture to the mounted bracket, ensuring it is securely fastened and the rubber gaskets are properly seated for IP54 protection.
6. Restaura l'alimentació:
   • Once installation is complete and all connections are secure, switch the main power supply back on at the circuit breaker.

Image: The Nordlux Tin Maxi Outdoor Wall Light installed on a brick wall, demonstrating its upward and downward illumination.

Image: Dimensional drawing of the Nordlux Tin Maxi Outdoor Wall Light, showing its height, width, and depth measurements.

5. Instruccions de funcionament

The Nordlux Tin Maxi Outdoor Wall Light features an integrated motion sensor for automatic operation.

Funcionalitat del sensor de moviment:

The light will automatically turn on when motion is detected within its sensing range and ambient light conditions are below a set threshold. It will turn off after a pre-set duration if no further motion is detected.

Adjusting Sensor Settings:

The motion sensor typically has adjustable settings for:

• Time (Duration): How long the light stays on after motion is detected and no further motion is sensed.
• Distance (Sensitivity): The range at which the sensor detects motion.
• Lux (Ambient Brightness): The ambient light level below which the sensor becomes active. This prevents the light from turning on during daylight hours.

To access these settings, locate the small, often semi-spherical, cover on the sensor unit. Gently flip or slide this cover down to reveal the adjustment dials. Use a small screwdriver or a similar tool to carefully turn the dials to your desired settings. Once adjusted, close the cover to maintain the IP54 rating.

Refer to the specific markings on the sensor dials for guidance on increasing o decreasing each setting.

6. Manteniment

Regular maintenance will help prolong the life and appearance of your Nordlux Tin Maxi wall light.

• Neteja:
  • Before cleaning, ensure the power supply to the light is switched off.
  • Netegeu l'aparell amb un drap suauamp drap. Per a la brutícia persistent, es pot utilitzar una solució de sabó suau i, a continuació, netejar amb un drap net.amp tela.
  • Do not use abrasive cleaners, solvents, or high-pressure water jets, as these can damage the finish or compromise the IP rating.
• Substitució de bombetes:
  • Always switch off the power supply before replacing bulbs.
  • Allow bulbs to cool down completely before handling.
  • Twist the old GU10 bulb counter-clockwise to remove it.
  • Insert the new GU10 bulb (max 35W) and twist clockwise to secure.
• Inspecció: Inspeccioneu periòdicament l'aparell per detectar qualsevol signe de desgast, danys o connexions soltes. Si trobeu algun problema, consulteu un electricista qualificat.

7. Solució De Problemes

If you encounter issues with your Nordlux Tin Maxi wall light, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Nordlux customer support or a qualified electrician.

8. Especificacions

9. Garantia i Suport

Nordlux products are manufactured to high standards and are designed for durability. For information regarding the warranty period and terms for your Nordlux Tin Maxi Outdoor Wall Light, please refer to the warranty card included with your purchase or visit the official Nordlux weblloc.

If you require technical assistance, have questions about installation, or need to report a defect, please contact your retailer or Nordlux customer support directly. When contacting support, please have your model number (21512103) and proof of purchase ready.

Nordlux Official Weblloc: www.nordlux.com

For customer reviews and additional product information, you may visit the product page on Amazon:

Pàgina de producte d'Amazon: https://www.amazon.pl/dp/B008E6UL7Y