Manual d'usuari del multímetre analògic Hioki 3030-10 HiTester

1. Introducció

This manual provides essential instructions for the safe and effective operation of the Hioki 3030-10 HiTester Analog Multimeter. This device is an average-sensing, manual-ranging meter designed for measuring voltage, resistance, and current in various electrical testing applications. Please read this manual thoroughly before use and retain it for future reference.

2. Informació de seguretat

To ensure safe operation and prevent damage to the device, observe the following safety precautions:

• The meter is designed to meet International Electrotechnical Commission (IEC) safety standard 61010.
• It is certified for Category III installations up to 600V, suitable for use with enclosed building circuit installations (e.g., service panel parts, branch circuits, fixed installations connected directly to AC power supply).
• A 0.5-amp/250V fuse is installed to protect the operator from electric shock due to transient voltage. Do not bypass or use an incorrect fuse.
• Always select the appropriate measurement range before connecting the test leads to the circuit.
• No supereu les classificacions màximes d'entrada per a cap funció.
• Inspeccioneu els cables de prova per detectar danys abans de cada ús. Substituïu-los si l'aïllament està compromès.
• The meter is designed to withstand falls of up to 1 meter onto hardwood or concrete. However, avoid dropping the device.

3. Contingut del paquet

Verifiqueu que hi hagi tots els elements:

• Hioki 3030-10 HiTester Analog Multimeter
• Detachable Test Leads (Red and Black)
• Maleta de transport
• Manual d'usuari (aquest document)

4. Producte acabatview i Característiques

Figura 1: Hioki 3030-10 HiTester Analog Multimeter. The image displays the multimeter unit, its protective carrying case, and the red and black test leads. The multimeter features a clear analog display with multiple scales for various measurements, a central rotary switch for function and range selection, and input jacks for the test leads.

The Hioki 3030-10 is an analog multimeter designed for reliable electrical measurements. Key features include:

• Pantalla analògica: Provides a clear, real-time indication of measurements, useful for observing trends and fluctuations.
• Manual Ranging: Requires the user to select the appropriate measurement range for precision.
• Average-Sensing: Delivers accurate readings for linear loads with undistorted waveforms.
• Funcions de mesura: Mesures DC/AC voltage, corrent continu i resistència.
• Battery Test Feature: Determines charge level for 1.5V batteries.
• LED Test Function: Allows testing of LED lights.
• Temperature Measurement Capability: Requires a separately sold thermistor probe.
• Compliment de seguretat: Meets IEC 61010, CAT III 600V safety standards.
• Disseny durador: Engineered to withstand drops up to 1 meter.

5. Configuració

5.1 Instal·lació de la bateria

The Hioki 3030-10 requires two AAA batteries for operation. To install or replace batteries:

1. Ensure the multimeter is turned OFF (rotary switch set to 'OFF').
2. Localitzeu la tapa del compartiment de la bateria a la part posterior de la unitat.
3. Open the cover and insert two AAA batteries, observing the correct polarity (+/-) as indicated inside the compartment.
4. Tanqueu de manera segura la tapa del compartiment de la bateria.

5.2 Connexió del cable de prova

Connect the detachable test leads to the multimeter:

• Inseriu el cable de prova negre a la presa d'entrada "COM" (comú).
• Insert the red test lead into the "VΩmA" input jack for voltagmesures de e, resistència i corrent.
• Ensure connections are firm before proceeding with any measurements.

6. Instruccions de funcionament

The Hioki 3030-10 is a manual-ranging multimeter. Always select the appropriate function and range using the rotary switch before making a measurement.

6.1 DC Voltage Mesura (V)

1. Ajusteu l'interruptor rotatiu al volum de CC desitjattage (V) range (e.g., 0.3V, 3V, 12V, 30V, 120V, 300V, 600V). Start with the highest range if the voltage es desconeguda.
2. Connecteu el cable de prova vermell al costat positiu (+) del circuit i el cable de prova negre al costat negatiu (-).
3. Llegeix el voltage value from the appropriate DCV scale on the analog display.

6.2 AC Voltage Measurement (~V)

1. Ajusteu l'interruptor rotatiu al volum de CA desitjattage (~V) range (e.g., 12V, 30V, 120V, 300V, 600V). Start with the highest range if the voltage es desconeguda.
2. Connecteu els cables de prova a través del voltatge de CAtage font.
3. Llegeix el voltage value from the appropriate ACV scale on the analog display.

6.3 DC Current Measurement (A)

Precaució: Always connect the multimeter in series with the circuit when measuring current. Never connect it in parallel across a voltage font.

1. Set the rotary switch to the desired DC Current (A) range (e.g., 60µA, 30mA, 300mA). Start with the highest range if the current is unknown.
2. Break the circuit and connect the multimeter in series, ensuring the current flows through the meter.
3. Read the current value from the appropriate DCA scale on the analog display.

6.4 Mesura de resistència (Ω)

Precaució: Assegureu-vos que el circuit estigui desenergitzat abans de mesurar la resistència.

1. Set the rotary switch to the desired Resistance (Ω) range (e.g., x1, x10, x100, x1k).
2. Before measuring, short the test leads together and adjust the "Ω ADJ" knob (if present) to zero the meter.
3. Connecteu els cables de prova al component que s'ha de mesurar.
4. Read the resistance value from the Ω scale on the analog display and multiply by the selected range multiplier.

6.5 Battery Test (BATT 1.5V)

1. Set the rotary switch to the "BATT 1.5V" position.
2. Connect the red test lead to the positive (+) terminal of the 1.5V battery and the black test lead to the negative (-) terminal.
3. Read the battery charge level from the "BATT" scale on the analog display.

6.6 LED Test (LED)

1. Set the rotary switch to the "LED" position.
2. Connect the test leads to the LED. Observe polarity; if the LED does not light, reverse the leads.
3. A lit LED indicates functionality.

6.7 Mesura de la temperatura (TEMP)

This function requires a separately purchased thermistor probe. Refer to the thermistor probe's manual for specific connection and operation instructions.

1. Set the rotary switch to the "TEMP" position.
2. Connect the thermistor probe to the designated input jacks.
3. Read the temperature from the "TEMP(°C)" scale on the analog display.

7. Manteniment

7.1 Neteja

Netegeu el comptador casing amb un suau, damp cloth. Do not use abrasive cleaners or solvents. Ensure the device is off and disconnected from all circuits before cleaning.

7.2 Canvi de fusibles

If the current measurement function ceases to operate, the fuse may need replacement. The Hioki 3030-10 uses a 0.5-amp/250V fuse. Always replace with a fuse of the identical type and rating.

1. Assegureu-vos que el multímetre estigui apagat i que els cables de prova estiguin desconnectats.
2. Refer to the device's internal diagram (if available) or contact customer support for instructions on accessing the fuse compartment.
3. Carefully remove the old fuse and insert the new 0.5A/250V fuse.
4. Reassemble the meter securely.

7.3 Emmagatzematge

When not in use, store the multimeter in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.

8. Solució De Problemes

If the multimeter does not function as expected, consider the following:

• Sense pantalla/alimentació: Comproveu la instal·lació de les piles i assegureu-vos que no estiguin esgotades. Substituïu-les si cal.
• Lectures incorrectes:
  • Assegureu-vos que s'hagin seleccionat la funció i el rang correctes per a la mesura.
  • Verify test leads are properly connected and not damaged.
  • For resistance measurements, ensure the circuit is de-energized and the meter is zeroed.
• Current Function Not Working: Check the internal fuse (refer to Section 7.2).
• L'agulla no es mou: Ensure the meter is powered on and the test leads are making good contact with the circuit. Check for open circuits.

If problems persist after attempting these steps, contact Hioki customer support for further assistance.

9. Especificacions