Manual d'instruccions del filtre d'aire i ionitzador Vortice 25080

1. Informació de seguretat

Please read all safety instructions carefully before using the Vortice 25080 Air Filter and Ionizer. Retain this manual for future reference.

• Assegureu-vos que la unitat estigui col·locada sobre una superfície estable i anivellada per evitar que es bolqui.
• No bloquegeu les entrades ni sortides d'aire. Mantingueu un espai lliure adequat al voltant de la unitat per a un flux d'aire adequat.
• Unplug the unit from the power outlet before cleaning, performing maintenance, or when not in use for extended periods.
• Do not operate the unit with a damaged power cord or plug. Contact qualified service personnel for repairs.
• Keep the unit away from water and moisture. Do not use in bathrooms or other damp ambients.
• Aquest aparell no està pensat per ser utilitzat per persones (inclosos nens) amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, tret que hagin rebut la supervisió o instruccions sobre l'ús de l'aparell per una persona responsable de la seva seguretat.

2. Producte acabatview

The Vortice 25080 is an air filter and ionizer designed to improve indoor air quality. It features multiple fan speeds and an ionizer function.

2.1 Components de la unitat

Figura 1: Davant view of the Vortice 25080 Air Filter and Ionizer. This image displays the main unit with its air intake grille and control panel on the top right.

Figura 2: Primer pla view of the control panel. This panel includes a rotary switch for fan speed, a red 'Saturated Filter' indicator light, an ON/OFF switch, and an 'IONIZER' switch.

2.2 Dimensions

Figura 3: Dimensional diagram of the Vortice 25080 Air Filter. The diagram illustrates the unit's length (A), width (B), and height (C) for placement planning.

3. Configuració

3.1 Desembalatge

Carefully remove the air filter from its packaging. Inspect the unit for any signs of damage. Retain packaging materials for future transport or storage.

3.2 Col·locació

Place the Vortice 25080 on a firm, level surface. Ensure there is at least 20 cm (8 inches) of clear space around all sides of the unit to allow for optimal air circulation. Avoid placing it near heat sources, direct sunlight, or in areas with high humidity.

Figura 4: Example of the Vortice 25080 Air Filter placed vertically in a room. The unit can be oriented horizontally or vertically depending on space and preference, ensuring proper airflow.

3.3 Instal·lació inicial del filtre

The unit comes with a filter pre-installed. Before first use, ensure the filter is correctly seated. Refer to the 'Maintenance' section for instructions on accessing the filter compartment.

Figura 5: The Vortice 25080 Air Filter with its top cover removed, revealing the internal filter assembly. This view is relevant for filter inspection and replacement.

Once placed and the filter is confirmed, plug the power cord into a suitable electrical outlet.

4. Instruccions de funcionament

4.1 Engegada/apagada

1. Per girar la unitat ON, locate the ON/OFF switch on the control panel (refer to Figure 2) and flip it to the '1' position.
2. Per girar la unitat OFF, flip the ON/OFF switch to the '0' position.

4.2 Control de velocitat del ventilador

The Vortice 25080 features multiple fan speed settings. Use the rotary switch on the control panel (refer to Figure 2) to select your desired fan speed:

• Rotate the knob clockwise to increase the fan speed.
• Rotate the knob counter-clockwise to decrease the fan speed.

4.3 Funció ionitzador

The ionizer function helps to further purify the air by releasing negative ions. To activate or deactivate the ionizer:

• Locate the 'IONIZER' switch on the control panel (refer to Figure 2).
• Flip the switch to the 'ON' position to activate the ionizer.
• Flip the switch to the 'OFF' position to deactivate the ionizer.

4.4 Saturated Filter Indicator

The red 'SATURATED FILTER' indicator light on the control panel (refer to Figure 2) illuminates when the air filter requires cleaning or replacement. When this light appears, proceed to the 'Maintenance' section for filter servicing instructions.

5. Manteniment

Regular maintenance ensures optimal performance and longevity of your Vortice 25080 Air Filter and Ionizer.

5.1 Substitució/Neteja del filtre

The filter should be cleaned or replaced when the 'SATURATED FILTER' indicator light illuminates, or approximately every 3-6 months depending on usage and air quality.

1. Unplug the unit: Always disconnect the power cord from the electrical outlet before performing any maintenance.
2. Access the filter: Refer to Figure 5. Carefully open the filter compartment cover.
3. Traieu el filtre: Gently pull out the old or dirty filter.
4. Clean or Replace:
   • If the filter is washable (check filter type), clean it according to manufacturer instructions, typically with mild soap and water, then allow it to dry completely before reinstallation.
   • If the filter is disposable, replace it with a new, genuine Vortice replacement filter (Model 25080 filter).
5. Reinstall filter: Insert the clean or new filter into the compartment, ensuring it is seated correctly.
6. Close cover: Tanqueu bé la tapa del compartiment del filtre.
7. Reset indicator: After replacing or cleaning the filter, the 'SATURATED FILTER' light should reset automatically or can be manually reset by turning the unit off and on.

5.2 Neteja de la unitat

Wipe the exterior of the unit with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Do not use abrasive cleaners, solvents, or spray directly onto the unit.

6. Solució De Problemes

If you encounter issues with your Vortice 25080, refer to the following common problems and solutions:

• La unitat no s'encén:
  • Assegureu-vos que el cable d'alimentació estigui ben connectat a una presa de corrent que funcioni.
  • Check if the ON/OFF switch is in the '1' position.
  • Verifiqueu que l'interruptor automàtic no s'hagi disparat.
• Flux d'aire reduït:
  • Check if the air filter is clogged. Clean or replace the filter as described in the 'Maintenance' section.
  • Assegureu-vos que les entrades i sortides d'aire no estiguin bloquejades.
• 'SATURATED FILTER' light remains on after cleaning/replacement:
  • Ensure the filter is correctly installed and the compartment cover is securely closed.
  • Try turning the unit off and then on again to reset the sensor.
• Soroll inusual:
  • Assegureu-vos que la unitat estigui sobre una superfície estable i anivellada.
  • Check for any foreign objects inside the unit (after unplugging).
  • Si el soroll persisteix, contacteu amb l'atenció al client.

If the problem persists after attempting these solutions, please contact Vortice customer support.

7. Especificacions

8. Garantia i Suport

The Vortice 25080 Air Filter and Ionizer comes with a manufacturer's warranty. For specific warranty details, including coverage and duration, please refer to the warranty card included with your product or visit the official Vortice weblloc.

For technical support, replacement parts, or any inquiries not covered in this manual, please contact Vortice customer service through their official channels. When contacting support, please have your product model number (25080) and purchase date available.